Jump to content

Recommended Posts

Posted

E444-044

Hi everyone, this is the second MOC for my project of Italian locomotives that will affect the period from 1930 to 2015.

It's time for the sinuous E444, also called "Tartaruga" that means "Turtle" for its rounded shapes, in exercise from 1967.

e444-001.jpg

e444-002.jpg

After seeing the beautiful model made by Helos http://www.eurobricks.com/forum/index.php?/forums/topic/61979-moc-e444-the-turtle-electric-fs-locomotive/ I've made my own replica with some minus differences like the air intakes on the sides and other pieces not previously available in blue.

This locomotive became the official engine of the “Gran Confort” coaches

e444-003.jpg

e444-004.jpg

As usual I made this model employing the PF system, using the IR receiver in upside down position and realizing my usual lights :classic:

e444-028.jpg

e444-030.jpg

e444-029.jpg

e444-010.jpg

e444-012.jpg

Enjoy the pictures... :sweet:

e444-005.jpg

e444-006.jpg

e444-007.jpg

e444-008.jpg

e444-009.jpg

e444-011.jpg

e444-013.jpg

e444-014.jpg

e444-015.jpg

e444-016.jpg

e444-017.jpg

e444-018.jpg

 

e444-020.jpg

e444-021.jpg

e444-022.jpg

e444-023.jpg

e444-024.jpg

e444-025.jpg

e444-026.jpg

e444-027.jpg

Now what's next?

e444-031.jpg

...stay tuned! :wink:

Posted

Very nice, and, at the same time, concise and very detailed locomotive. The cars are worthy of respect separately. Excellent passages with width of 6 to 7 in many places. The signal receiver is very well disguised. Overall impression of the model is only positive. This perfect combination of model and, in fact, the very style of Lego trains.
Especially I want to note the excellent smooth and rounded shape of the locomotive. Nice to look at it from all sides.
And thanks for the history of the country in the locomotive building your Lego beautiful presentation.

Posted (edited)

Again, you’ve created a beautiful train MOC! :thumbup: Always amazing how much functionality you manage to squeeze into your models.
I love the design of the front skirting below the buffer beam. And that little turtle sticker… :wub:

As I might want to copy your (clever!) idea to hide the IR-receiver upside down: May I ask how well it is working in that position?

And I hope that you don’t mind if I make one suggestion: Looking at the prototype photos, I found it a bit unsatisfactory that your model has a one-piece front window, so I messed around a bit with LDD and came to this solution for the front end:

500x360.jpg

(lxf here)
It might look a bit wobbly, but I tried out and it’s actually quite stable.

Edited by Tenderlok
Posted

Oh my God, I have my own E444 moc ready on the shelve and I cannot present it because i missed one piece from my bricklink order and to-day you published your. Well, i am a very unlucky man. Anyway your Loco is beautifull as ever and your passenger coaches too.

Posted

Very nice job on the train.  Looks great.  Funny, they are called turtles when they have a top speed of 200 km/h.  :classic:

What's next?   Maybe an E444R?

 

 

Posted
  On 11/1/2016 at 12:05 PM, Nemo57 said:

The signal receiver is very well disguised

Expand  

 

  On 11/1/2016 at 7:58 PM, Tenderlok said:

(clever!) idea to hide the IR-receiver upside down: May I ask how well it is working in that position?

And I hope that you don’t mind if I make one suggestion: Looking at the prototype photos, I found it a bit unsatisfactory that your model has a one-piece front window, so I messed around a bit with LDD and came to this solution for the front end:

500x360.jpg

Expand  

Thanks Nemo 57 and Tenderlok the IR receiver works surprisingly well. Tenderlok thanks for the hint but a prefer to apply a sticker to split the windscreen (like the effect of the Horizon Express)

  On 11/1/2016 at 11:45 PM, Ex cinno said:

Oh my God, I have my own E444 moc ready on the shelve and I cannot present it because i missed one piece from my bricklink order and to-day you published your. Well, i am a very unlucky man. Anyway your Loco is beautifull as ever and your passenger coaches too.

Expand  

Not a problem Ex Cinno, my E444 is a replica so we'll be glad to see a new interpretation of the same locomotive!

  On 11/2/2016 at 12:40 AM, MaxSupercars said:

Lovely shapes.

Expand  

 

  On 11/2/2016 at 12:57 AM, dr_spock said:

Very nice job on the train.  Looks great.

Expand  

 

  On 11/2/2016 at 8:49 AM, Capparezza said:

Sleek train and an interesting design for the pantographs. I like it :thumbup:

Expand  

Thanks to you all! :blush:

Posted
  On 11/2/2016 at 6:39 PM, LEGO Train 12 Volts said:

Tenderlok thanks for the hint but a prefer to apply a sticker to split the windscreen

Expand  

I didn't dare to propose that, in order not to offend the purists... :wink:

One more question (well, two, actually): Do I have it right that the motor is powered by the 9V block battery, while the AAs (AAAs?) feed the lights? If so, how long does the 9V block last when the train is running?

Thanks for your patience with me asking such things!

Posted

You're always welcome Tenderlok :classic: ...about the question the 9 volts battery feed just the lights; as you can see in the seventh picture I use n. 6 batteries AAA to power the motor.

In any case it's possible to use the 9 volts battery but just for little shunter because the power last fast 

kof-20.jpg

Posted

Thanks for the immediate reply!

  On 11/2/2016 at 9:57 PM, LEGO Train 12 Volts said:

the 9 volts battery feed just the lights; as you can see in the seventh picture I use n. 6 batteries AAA to power the motor.

Expand  

Oh... I thought it were only 3 AAAs. Seems as if I need new glasses... :hmpf_bad:

That Köf is also very cute! :wub:

Posted (edited)

    This is a quality build. Nice building techniques and smooth transition from 6 to 7wide near the windscreen. I'll use this as a source of inspiration for a couple of future projects of mine. Tenderlok's suggestion for brickbuilt windscreen was equally interesting, but all respect that you keep your own design.

Edited by Selander
Posted (edited)

How does the bottom mounted IR receiver work out? Does it work flawlessly or do you have to keep the remote a bit lower for it to work? Quite a nifty idea to hide that ugly receiver window.

 

Nevermind... this has been answered before, Thanks LT12V. Maybe I should refresh the page before commenting :grin:

Edited by Capparezza
Posted
  On 11/3/2016 at 6:42 AM, Selander said:

 Nice building techniques and smooth transition from 6 to 7wide near the windscreen. I'll use this as a source of inspiration for a couple of future projects of mine.

Expand  

This technique is not mine ...I have just copied :sceptic: so feel free to take your inspiration ...like me! :grin:

  On 11/3/2016 at 7:19 AM, Capparezza said:

How does the bottom mounted IR receiver work out?

Expand  

It works fine! I suggest this solution as often is possible! :wink:

Posted

Well my dear friend, nice to see again this reproduction and some enthusiasts who appreciate it and share interesting suggestions.

I think for the next step the Gran Confort coaches might be increased in lenght up to 56 studs and a more updated solution for the on board devices low cowling. For  the turtle some studs more and might be checked the proposed new windshield and front

I'm longingly waiting for TLG prints this in dark blue

2877.png

so this loco might be built in DB, a  more proper color . We pretend that this loco in Lego standard blue is a weathered version.

 

 

 

Posted

Great model, interesting prototype (I'm learning a lot about real trains across the world just by reading this forum...)

Posted
  On 11/6/2016 at 6:24 PM, helos said:

I'm longingly waiting for TLG prints this in dark blue

2877.png

so this loco might be built in DB, a  more proper color . We pretend that this loco in Lego standard blue is a weathered version.

Expand  
 
I think it could happen soon ...but I like the standard blue color! :wink:
  On 11/7/2016 at 8:17 PM, Asper said:

Great model, interesting prototype (I'm learning a lot about real trains across the world just by reading this forum...)

Expand  

Thanks for the compliments and I'm glad for you! :classic:

Posted
  On 11/1/2016 at 7:58 PM, Tenderlok said:

And I hope that you don’t mind if I make one suggestion: Looking at the prototype photos, I found it a bit unsatisfactory that your model has a one-piece front window, so I messed around a bit with LDD and came to this solution for the front end:

500x360.jpg

Expand  

I feel like this would work best if there were blue under the windows.

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...