[MOC] European Style Truck with Trailer

[syclone]

Good day!

Still waiting for the BL order for TC10 , so here's another MOC of mine:

RC European Style truck. bricksafe

LDD file only for truck - download

parts list

Solved the problem with the battery ( created an adaptor)

so now the 2000mah are powering this

 

I was able to pull 5kg with it, but the trailer was bending a lot. For the video I have put a 3kg weight

Features:

• drive by 2 M-motor with a 1:3 gear ratio
• steering by 1 M-motor with new RtC mechanism
• electric output (both PF and 9v) on the rear 
• "fifth wheel" 
• blue seats and dashboard
• openable doors

Trailer:

The ramps can be lowered and there are also supports. No many details because the main objective was the truck. 

I haven't made anything in LDD yet , so it will take some time.

:)

Edited October 2, 2016 by LXF

[Edwin Korstanje]

Realy good looking truck and great solution on the slope panel back wall.

[2LegoOrNot2Lego...]

Nice, the truck is very cool. The trailer seem to be a little bending, even without a load.

[jorgeopesi]

I agree really great nice truck.

[grum64]

Great work LXF

[legosamigos]

Nice truck, but a semi-trailer scrapes on the rear wheels

[offroadcreations]

Great job! I really like how you incorporated the output in the rear.

[Imanol BB]

That is a really amazing creation LXF, i first thought it was only for display, but i see that is further much better than that, so many details and so many functions in such small vehicle is really impressive, nice work.

[Richard L aka Scooby]

This is the scale i love the most. And i think this moc is super made. Are ther instructions comming?

[syclone]

LDD file only for truck - download

parts list

IMPORTANT!

- The pink half liftarm must be changed to part 4263

- The rubber bands are for the steering, pass them throught the 90 degree connector and put the ends on the towballs

- My laptop is slow , and LDD is glitching sometimes , so the 15l liftarm and 2l connectors aren't in place 

18 hours ago, Edwin Korstanje said:

Realy good looking truck and great solution on the slope panel back wall.

Thanks!

16 hours ago, 2LegoOrNot2Lego... said:

Nice, the truck is very cool. The trailer seem to be a little bending, even without a load.

I have never built something as long as that , the trailer is bending even with two pararrel levels uder the plates

16 hours ago, jorgeopesi said:

I agree really great nice truck.

Thanks!

16 hours ago, grum64 said:

Great work LXF

Thanks!

16 hours ago, legosamigos said:

Nice truck, but a semi-trailer scrapes on the rear wheels

Thanks! I have no idea of builduing trailers  , also was running out of red parts , made a compromise there 

15 hours ago, Offroadcreat1ons said:

Great job! I really like how you incorporated the output in the rear.

If I had something to power 

13 hours ago, ImanolBB said:

That is a really amazing creation LXF, i first thought it was only for display, but i see that is further much better than that, so many details and so many functions in such small vehicle is really impressive, nice work.

Thanks!

55 minutes ago, Richard L aka Scooby said:

This is the scale i love the most. And i think this moc is super made. Are ther instructions comming?

Thanks!  LDD file in the start of this post 

Edited September 25, 2016 by LXF