Kman860 Posted December 3, 2015 Posted December 3, 2015 On 12/2/2015 at 6:07 AM, Blakbird said: That right angle joint is freaking me out. Doesn't seem like it should work, but it obviously does. I had to stare at the gears for a while as well to understand why they rotate the same direction. Seconded! Quote
RohanBeckett Posted December 3, 2015 Posted December 3, 2015 built the hobson's coupling last night.. left it on the kitchen counter, for Mr 5yr old to discover in the morning... wake up with 'Cooool..... but it sticks a bit... oh.. it's this 6 axle jamming in the hole.. you have to poke it back a bit' I expect to come home tonight, and find it motorised... nice to have a little engineer/problem solver in the making! Quote
Kman860 Posted December 4, 2015 Posted December 4, 2015 On 12/4/2015 at 12:37 AM, pyro690 said: That is awesome! +1 Quote
TheWarden Posted December 4, 2015 Posted December 4, 2015 Are there any pictures or instructions about? I would love to build one to surprise an engineer friend. I'm non-Technic oriented, but I might be able to make due pausing the video. Quote
Space Police XVIII Posted December 4, 2015 Posted December 4, 2015 Okay, these are pretty awesome. And the music in the Hobson coupling video is annoyingly familiar, can I ask where it's from? Quote
doug72 Posted December 4, 2015 Posted December 4, 2015 On 12/4/2015 at 2:10 AM, TheWarden said: I'm non-Technic oriented, but I might be able to make due pausing the video. That's how i built my two working copies. The Parox gear one is the hardest to figure out. Quote
aeh5040 Posted December 4, 2015 Author Posted December 4, 2015 Wow, I wasn't expecting so much interest - thanks folks! I'll try to do more stuff like this. On 12/2/2015 at 7:32 AM, MajklSpajkl said: Have you tried to apply any considerable torque to the joint - do the axles still run through holes so smoothly? It wouldn't be suitable for really high torque, because of the long unsupported axles, but with a moderate amount it actually works fine. On 12/2/2015 at 6:07 PM, GBC Master said: Do you think that right angle Hobson joint would work with red #3 connectors as well? Yes, it will. As Teuk pointed out, it will even work with flexible connections. On 12/3/2015 at 8:38 AM, RohanBeckett said: this looks like something Isogawa would build! Now that is a compliment! Thanks! On 12/3/2015 at 8:38 AM, RohanBeckett said: might try to use it in a GBC or something - even if it's 'just for show' (which, technically, what most GBC's are!) I guess it might be possible to combine several (perhaps larger versions) to make a sort of ball escalator - not easy though... On 12/3/2015 at 11:24 PM, RohanBeckett said: left it on the kitchen counter, for Mr 5yr old to discover in the morning... I expect to come home tonight, and find it motorised... This made my day! On 12/4/2015 at 2:10 AM, TheWarden said: Are there any pictures or instructions about? I would love to build one to surprise an engineer friend. I'm non-Technic oriented, but I might be able to make due pausing the video. The intention was that both should be reconstructable from the video. I don't have anything else right now, but if you are having trouble with something specific, just ask... On 12/4/2015 at 3:41 AM, Space Police XVIII said: And the music in the Hobson coupling video is annoyingly familiar, can I ask where it's from? It was just one of the youtube freebies. It reminds me of the Dubliners version of "Protect and Survive", but I don't think it's actually related! Quote
Dafgek81 Posted December 4, 2015 Posted December 4, 2015 That Hobsons coupling is so cool, will build something like that soon Quote
andrewganschow Posted December 5, 2015 Posted December 5, 2015 (edited) I built the hobson by.looking at your video, and after a little bit of playing around, I put a 8 tooth gear on the input shaft then meshed a 40 tooth gear with it driven by a L motor. So now it turns at roughly 850 rpms, and the joint runs smoothly at that speed. No lock ups or skips. I'm still mesmerized by it. Edited December 5, 2015 by andrewganschow Quote
Kman860 Posted December 5, 2015 Posted December 5, 2015 On 12/5/2015 at 4:09 PM, andrewganschow said: I built the hobson by.looking at your video, and after a little bit of playing around, I put a 8 tooth gear on the input shaft then meshed a 40 tooth gear with it driven by a L motor. So now it turns at roughly 850 rpms, and the joint runs smoothly at that speed. No lock ups or skips. I'm still mesmerized by it. Sounds awesome Quote
GI_Jack Posted December 6, 2015 Posted December 6, 2015 Showed it to my children and we are all amazed Quote
TechniChriS Posted December 6, 2015 Posted December 6, 2015 On 12/2/2015 at 5:59 AM, aeh5040 said: I feel a bit embarrassed posting these given some of the amazing creations we've seen recently, but here are a couple of little mechanisms. Neither is original as a concept, but the LEGO implementations are new. Enjoy! Thanks, I always enjoy your unusual creations. Quote
Zimix Posted December 6, 2015 Posted December 6, 2015 That's exactly what lego technic is about, to show how so called simple mechanism do work. Nice work !! And I really enjoyed to watch it. Quote
GoldVillage Posted December 6, 2015 Posted December 6, 2015 TY for sharing, didnt even know that kinda coupling existed! Quote
Kman860 Posted December 6, 2015 Posted December 6, 2015 On 12/6/2015 at 4:39 PM, GoldVillage said: TY for sharing, didnt even know that kinda coupling existed! Me neither Quote
TheNextLegoDesinger Posted December 6, 2015 Posted December 6, 2015 On 12/6/2015 at 6:19 PM, Kman860 said: On 12/6/2015 at 4:39 PM, GoldVillage said: TY for sharing, didnt even know that kinda coupling existed! Me neither +1 Quote
aeh5040 Posted December 6, 2015 Author Posted December 6, 2015 On 12/6/2015 at 1:32 PM, Zimix said: That's exactly what lego technic is about, to show how so called simple mechanism do work. Nice work !! And I really enjoyed to watch it. Thanks again everyone! I am heartened that such a simple bare-bones presentation of a mechanism has generated so much interest! Quote
rollermonkey Posted December 6, 2015 Posted December 6, 2015 Quick poll: how many people watched these and immediately built one or the other? I broke down sets on my desk to make the Hobson's joint. Very cool. Quote
doug72 Posted December 6, 2015 Posted December 6, 2015 Have built both of them and added a motor to the hoburn coupling - fascinating to watch Quote
John Daniels Posted December 6, 2015 Posted December 6, 2015 I built a bit more compact version of the Hobson coupling. Extraordinarily fun to watch! Quote
aeh5040 Posted December 7, 2015 Author Posted December 7, 2015 On 12/6/2015 at 11:21 PM, John Daniels said: I built a bit more compact version of the Hobson coupling. Extraordinarily fun to watch! Please show us! Quote
Kman860 Posted December 7, 2015 Posted December 7, 2015 On 12/6/2015 at 11:21 PM, John Daniels said: I built a bit more compact version of the Hobson coupling. Extraordinarily fun to watch! Is that even possible? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.