Jump to content

Recommended Posts

Posted

Hello all

I couldn't hold in my delight when I came across a teaser trailer from osuharding1 for crowkillers new supercar. You must see it at once. Here is a link:

As far as we know it is a police edition supercar, it boasts a v10 engine I think or it my be a flat 10. It might be motorized, but I can't tell. Instructions will be available soon from crowkillers, and a possible review from osuharding1. The design is so attractive, and crowkillers has captured that true mid engine look. If it is motorized, I'm sure it will be controlled via sbrick. Scale looks around 1:10 thereabouts, the car reminds me of a dtm car, eventhough dtm cars are front engine. One of the highlights of this truely awesome moc, is that it uses a 4 speed gearbox, actually planted in the rear of the car, so its realistic. But what sets this gearbox apart from his previous gearboxes, Is that he uses the new 2015 gears from the le mans 24 hour racecar set: The new gear selectors that are 3 studs long.

More info will follow soon, but if you know any further info, feel free to share them, and express your thoughts on this striking supercar.

Posted

I saw the model on Brickshelf, it's awesome, but I think you should have waited until Crowkillers himself makes a topic about it.

Posted (edited)

You simply can't build that car. There are only 2x BLUE 19L flex axles for sale on BL, in the whole world.

Over the past 3 months, 48 were sold. Someone was planning this all along.

Edit: Read below, somehow this was perceived with a very negative connotation. None implied.

Edited by DrJB
Posted

I just seen pics of it on Brickshelf. It is pretty amazing.

I absolutely love this shot. Very creative.

assassin500.jpg

assassin501.jpg

assassin504.jpg

assassin503.jpg

assassin507.jpg

assassin508.jpg

You simply can't build that car. There are only 2x BLUE 19L flex axles for sale on BL, in the whole world.

Plenty of sets they come in though. Jet Wasp -> 8444

Posted

Nice car, and, looking at the positive side: No one will complain that the blue 3L pins are sticking out.

Posted (edited)

You simply can't build that car. There are only 2x BLUE 19L flex axles for sale on BL, in the whole world.

Over the past 3 months, 48 were sold. Someone was planning this all along.

There is an extremely simple solution to your problem; Use pneumatic tubing. IMO it actually looks better

EDIT:

Oh, and absolutely awesome looking model! I suspect it uses the transmission setup Paul showed us earlier, where the actual gearbox is behind the seats, operated by some kind of linkage? :thumbup:

Edited by D3K
Posted (edited)

You simply can't build that car. There are only 2x BLUE 19L flex axles for sale on BL, in the whole world.

Over the past 3 months, 48 were sold. Someone was planning this all along.

Seriously...? Is this where you're going..?

See that blue mark..? That represents purchases that you have made for that product... I had 2 of them in my inventory and bought 2 of them from a seller here in the States.. If I bought them all up, then there would be a blue mark next to each one that I bought...

3j6WkXZ.jpg

Anyone else have any conspiracy theories to share..?

Unreal...

Edited by Paul Boratko
Posted (edited)

Seriously...? Is this where you're going..?

See that blue mark..? That represents purchases that you have made for that product... I had 2 of them in my inventory and bought 2 of them from a seller here in the States.. If I bought them all up, then there would be a blue mark next to each one that I bought...

Paul, don't sweat it. the 8444 are easy to get. At least for now. :grin:

Edited by Meatman
Posted (edited)

Seriously...? Is this where you're going..?

See that blue mark..? That represents purchases that you have made for that product... I had 2 of them in my inventory and bought 2 of them from a seller here in the States.. If I bought them all up, then there would be a blue mark next to each one that I bought...

Anyone else have any conspiracy theories to share..?

Unreal...

Sorry, I never implied whatever it is (I think) you understood. In these times of 'political correctness' one needs to remain quiet.

Edited by DrJB
Posted

Seriously...? Is this where you're going..?

See that blue mark..? That represents purchases that you have made for that product... I had 2 of them in my inventory and bought 2 of them from a seller here in the States.. If I bought them all up, then there would be a blue mark next to each one that I bought...

Anyone else have any conspiracy theories to share..?

Unreal...

I'd take it as a serious compliment, that someone believes you have that amount of influence over the AFOL community.

Great looking car, by the way :thumbup:

Posted

Sorry, I never implied whatever it is (I think) you understood. In these times of 'political correctness' one needs to remain quiet.

Your comment does sound like you are implying that "someone" bought up all of the blue axles as a plan to monopolize them. So who is this "someone" that you were talking about that had it planned all along? I would interpret that comment the same way that Paul did.

Posted

There are consistent complaints on here of DrJB's comments/reactions to others' comments Paul. Don't sweat it. His comments don't reflect the majority of the forums'.

For what its worth, not only are the comments that Paul refers to:

"You simply can't build that car. There are only 2x BLUE 19L flex axles for sale on BL, in the whole world.

Over the past 3 months, 48 were sold. Someone was planning this all along"

a conspiracy theory and inappropriate, but his comments:

"Nice car, and, looking at the positive side: No one will complain that the blue 3L pins are sticking out"

are a lousy attempt to save face. to say "looking at the positive side" by pointing out a flaw "blue 3L pins sticking out" is disingenuous at best.

Posted

Sorry, I never implied whatever it is (I think) you understood. In these times of 'political correctness' one needs to remain quiet.

BTW..... I love how he incites other's anger and then acts innocent or naive about knowing that he offended, like it's others' fault for being offended. He uses quotes ALOT (making fun at appropriate social behavior) ....his 'political correctness' statement is finger pointing at others.... a criticism of others being offended so easily....

sorry, rant done... but some of DrJB's behavior on here is getting wearrisome....

Posted

Seems to me that etiquette would suggest that the model designer would post a topic on their new model. While I created the video, it was a collaborative effort between Paul and myself. He and I discussed the option of posting the video here and we agreed to wait. Regardless, the topic is now out. Let's all please focus the discussion on the fantastic looking model.

Posted (edited)

Another masterpiece. I was planning to build the phantasm ,but now another white supercar comes along :cry_sad: Decisions decisons

Edit:Not implying they look similar as they look completely different. Just have a limited supply of white parts in my collection

Edited by Rishab N
Posted

I'd take it as a serious compliment, that someone believes you have that amount of influence over the AFOL community.

Well, actually Crowkillers, Sheepo and others do have enough influence on the aftermarket to cause depletion of the world supply of uncommon parts. It has happened repeatedly. However, I am not aware of any such designers intentionally buying up supply and then using rare parts in their MOCs in order to make money. Anyone who has made MOC instructions will know that there isn't any profit in it; it has to be done to serve the community.

Posted

Believe me, I absolutely hated the fact that I was using blue flexible axles, but I had no choice.. I wanted to do a Police type vehicle and it just worked, so I went with it.. the only other option was Black and White, but then the 19L black ones are even worse...

I think the colors could be switched with a white bottom and blue top(except for some panels)

I did the best I could to avoid other rare parts like #4 connectors and 3L pins with stop in white... There are also Two 14L white flexible axles in the rear... Those aren't too bad though...

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...