Davekuhh

My new project. A Daf CF 85 8x4 Tipper truck scale 1:17 completely remote controlled via Sbrick. In the color scheme of Oosterhof Holman a Dutch company in infrastructure. Functions: 2 XL motors for driving 1 Servo Motor for steering 2 L motors for the main cylinder (2x linear actuator) 1 L motor for the second cylinder (2x mini linear actuator) This second cylinder helps the main cylinder with heavy loads. I know the dark red rims are not available, But I'm going to paint this rims in dark red. Daf CF 85 chassis by davy linden, on Flickr Daf CF 85 cabin by davy linden, on Flickr

Thanks everybody!! A video of the features coming soon!!

The Caterpillar controlled by two Sbricks on one Power Functions Rechargeable Battery Box. Every light on the Caterpillar has a LED in it. I can control the lighting with the sbrick. The Caterpillar drive by twin XL motors for each track side 1 XL motor. All other fuctions be operated via the V2 pneumatic system. V2 pneumatic system: - compressor with auto-stop powered by 1 L motor - Four pneumatic switches powered by 4 Servo motors Switch 1: Raise / Lower the dozer blade Switch 2: Tilt dozer blade Switch 3: Raise / lower the ripper Switch 4: Tilt ripper Datasheet: Completion date: 10/03/2016 Construction time: 4 months Overall length Basic Tractor: 33,5cm Overall width Basic Tractor: 21 cm Overall width Blade: 28 cm Overall length Basis Tractor with Blade and Ripper: 62cm Weight: 3,7 kilo Motors:1x L motor 2x XL motor 4x Servo motor Caterpillar D11t scale 1:17 fully remote controle by Davy Linden ,on Flickr Caterpillar D11t scale 1:17 fully remote controle by Davy Linden ,on Flickr Caterpillar D11t scale 1:17 fully remote controle by Davy Linden ,on Flickr Caterpillar D11t scale 1:17 fully remote controle by Davy Linden ,on Flickr

Caterpillar D11t scale 1:17 WIP 4.0 Lifting test blade successful!! The blade (700 gram) is lifting with two V2 2 x 11 Cylinders Caterpillar D11T scale 1:17 WIP 4.0 by Davy Linden ,on Flickr

@ jorgeopesi Thnx @ 2LegoOrNot2Lego Thnx my friend @ Zblj There will be soon more pictures of the lighting

Thnx Sylvian After 10 meter cable and a lot of resistances and 3mm LEDs. The first test with the lighting at the Caterpillar Lighting on Caterpillar D11t by Davy Linden ,on Flickr

Work in progress Caterpillar D11t scale 1:17 2.0 Next step install on all the lamps 3mm LED lights controlled by Sbrick Caterpillar D11T scale 1:17 WIP 2.0 by Davy Linden ,on Flickr

I think Caterpillar's total weight will be around four kilos

@ 2LegoOrNot2Lego It will indeed be a nice combination with you lowboy trailer... But I think the dozer is too heavy for the trailer

The project is progressing slowly. Functions on Sbrick: 4 auto-valves powerd bij four servo motors 2 XL motors for drive ratio 1:5 1 L motor for compressor with auto stop Caterpillar D11t scale 1:17 WIP 1.0 by Davy Linden ,on Flickr

My new project again a Caterpillar D11T . This time, in a slightly smaller scale but motorized. New project Caterpillar D11t scale 1:17 by Davy Linden ,on Flickr Caterpillar D11t chassis with on the bottom of the chassis 4 auto-valves powered by four M motors on SBrick. Caterpillar WIP 1.0 by Davy Linden ,on Flickr

Stunning MOC!! Well done

Here is a picture of my models on display at LEGOworld 2015 Utrecht My display at LEGOworld 2015 Utrecht by Davy Linden,on Flickr

thanks guys!! Here a picture of the Volvo EW205D on display. I show them together with the Caterpillar D11t on display on LEGOworld Utrecht the netherland Volvo EW205D on display by Davy Linden ,on Flickr

A picture from the Caterpillar on display how to show him on LEGOworld Utrecht the netherlands. Specifications display: 132 cm x 83 cm The display is filled with 38 000 parts Caterpillar by Davy Linden ,on Flickr Caterpillar D11T on display with minifigure to get an impression of the size of the Lego model Caterpillar by Davy Linden ,on Flickr

interesting project!! The new rear Side looks very good

Looks awesome!! Can't wait to see it at LEGOworld

thanks guys for the nice comments, I uploaded next week a picture from the Caterpillar on display how to show him on Lego World

The Caterpillar D11t is finished after 6 months of build. It was my biggest project to date. The Caterpillar is built in scale 1:11 with a lot of details inside and outside. It Will be show at Lego World Utrecht together with the Volvo EW205D. Specifications LEGO model: Overall length Basic Tractor: 56 cm Overall width Basic Tractor: 34,5 cm Overall width Blade: 61 cm Overall length Basis Tractor with Blade and Ripper: 96 cm Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr Caterpillar by Davy Linden ,on Flickr More pictures at my flickr stream https://www.flickr.c.../128742269@N03/ Thanks for your time and reading this post.

absolutely stunning!!

Thanks guys The CAT is still missing his ripper. And Some final details.... Chrome work, decals and finally à display from 120 x 70 cm with à lot of LEGO parts. I hope that I can have it finished before october, so that I can show it on LEGOWORLD Utrecht together with my Volvo EW205D

Work in progress Caterpillar D11 Scale 1:11

Work in progress CAT 2.0 instal the Cat C32 ACERT engine

Well done, very functional Model