Calabar

[KEY TOPIC] Official LEGO Sets made in LDD

Recommended Posts

Awesome. I had been waiting for the pdf of this to be available at brickshelf. I never had the time to reverse engineer it. This will help me with presidential gags in Brick. Now I can do my B'rick Obama jokes.

:laugh:

I had been waiting a long time for it to be uploaded to LEGO.com as well. I finally saw it the other day and set to work straight away!

Share this post


Link to post
Share on other sites

Index updated!

33 new sets and 2 new themes have been added!

Check your sets for errors!

Rules of the thread updated: booking and requests.

Edited by Calabar

Share this post


Link to post
Share on other sites

Two LXF files have been updated - 10194 Emerald Night and 10187 Volkswagen Beetle.

Luckily I had the beetle on the shelf, so after examiniation I found that the 1x3 brick won't fit because you forgot to put a plate under the dark grey/red hinge pieces. So basically the two hinge pieces should come up one plate height. Then you will be able to fit the 1x3 brick. Also, after this is done, you can rotate the angled plate a little bit more so that it will rest on the two 1x2 sloped bricks.

You're right, my mistake. I'll report this to the LDD team.

A tiny, tiny note too - the rearview mirror in the cab needs to come up a bit. (but now I'm nitpicking :laugh:)

In any case - really nice work on the beetle. And thanks a million for being so careful that you take notes when you build the model and report what doesn't work. :thumbup:

I've added the 1 x 10 plate that was missing previously, and the 1 x 3 bricks do fit now! Thanks :thumbup:

Lego Emerald Night file has a problem - the LXF file has about 5 degree tilt from horizontal for all elements, which appear properly for visualisation but is a real pain if using bits in another model.

I will contact 'I Like Pi'.

Thanks for pointing that out! On my computer, it's difficult to rotate large chunks of parts, so I managed to fix the problem by placing an axle holder on the floor and moving one of the train's tan axles (the ones in the middle of the front wheels) into it to get it to be at a neutral tilt.

And here's my latest model...

----------------------------------

4999 Vestas Wind Turbine (BrickLink - Brickset)

00001.png

LXF file

Notes:

  • The tools that go in the van are outside instead because the 1 x 4 bricks with grooves that they are on do not fit in the 1 x 2 plates with door rails, which are inside the van.
  • There is no string for the yellow and blue gas tanks, as string cannot bend.
  • The gas tanks cannot attach to the hand truck because there is no real connection. In the real model, the gas tanks just rest on the hand truck.
  • The light bley 1 x 1 tile with gauge pattern on the gas tanks is just a blank tile instead as the print does not exist in LDD.
  • The 1 x 1 horizontal clip that is supposed to connect the hand truck to the rest of the tools is placed on the underside of the hole of the 3 x 2 plate, instead of being upside down on the top of the hole because the latter is not a possible connection in LDD.
  • The two white 1 x 2 tiles with mail prints have been replaced with a different print. They have also been left outside of the mailbox.
  • The chairs on the patio are placed off of the baseplate because they just sit loosely on the real model.
  • The turntable on the top of the wind turbine has been flipped upside down because two white axle and pin connectors wouldn't fit on the dark bley side.
  • One gear at the top of the turbine has been omitted completely since it does not exist in LDD, while another has been removed because it would not fit in between two Technic bricks.
  • All electronic items (excluding the Power Functions battery box) are not present in the model. The battery box is placed outside of the baseplate because in the real model, it sits in a shell of bricks, with no actual connections.

Edited by ILikePi

Share this post


Link to post
Share on other sites

I've added the 1 x 10 plate that was missing previously, and the 1 x 3 bricks do fit now! Thanks :thumbup:

You mean you have updated a na official set you posted before?

In this case, remember to clearly report it (so that everyone can easily notice it) and insert a link of the updated post.

Thanks ;)

Share this post


Link to post
Share on other sites

New one again...

8129 - AT-AT Walker

atat.jpg

It's nice to build something that goes straight on without a single problem, for once... Though after building it, I still do prefer the original 4483

LXF File

Edited by yellost

Share this post


Link to post
Share on other sites

I sifted through my offline gallery of instructions, and I decided to make the 11 mini sets that were in it yesterday. It feels good to be taking a short break from larger sets :laugh:

All the model names are from TLG's customer service page - it's the closest to the official model names that we'll get, since the polybags these sets come in are all blank.

---------------------------------------------------

7808 Yellow Airplane (BrickLink - Brickset)

0.png

LXF file

---------------------------------------------------

30020 Jet (BrickLink - Brickset)

00.png

LXF file

---------------------------------------------------

30021 Parrot (BrickLink - Brickset)

000.png

LXF file

Note:

  • The brick boundaries of the blue wedge plates that make up most of the parrot's wings are rectangular, and make the parrot appear to float in mid air because of those boundaries.

---------------------------------------------------

30031 World Race Powerboat (BrickLink - Brickset)

0000.png

LXF file

Note:

  • All prints on the minifig are different than the ones in the set, and there is no dual sided head print, back print, and leg/hip print.

---------------------------------------------------

30032 World Race Buggy (BrickLink - Brickset)

00000.png

LXF file

Notes:

  • I added a scarf to the minifig to simulate the dual sided face, which you can see here.
  • The brick boundaries of the tires make the buggy appear to float in mid air.
  • All prints on the minifig are different than the ones in the set, and there is no back print and leg/hip print.

---------------------------------------------------

30040 Octopus (BrickLink - Brickset)

000000.png

LXF file

Notes:

  • The Atlantis key has no printing.

---------------------------------------------------

30041 Piranha (BrickLink - Brickset)

0000000.png

LXF file

Note:

  • The Atlantis key has no printing.

---------------------------------------------------

30042 Diver (BrickLink - Brickset)

00000000.png

LXF file

Randal already made this model, but I decided to make it myself using the polybag's front as a guide for how the three black droid arms are placed, since the 'box art' is usually more accurate than the instructions.

Note:

  • The front torso print on the minifig is different than the one in the set, and there is no back print and leg/hip print.

---------------------------------------------------

30061 Attack Wagon (BrickLink - Brickset)

000000000.png

LXF file

Notes:

  • There are no torso prints, front and back.
  • The flame piece had to be substituted for the older version.
  • The black 1 x 1 cone on the wagon is the version with no top groove because the version with the groove would not fit in the spear's pole.

---------------------------------------------------

30062 Target Practice (BrickLink - Brickset)

0000000000.png

LXF file

Notes:

  • There are no torso prints, front and back.
  • The flame piece had to be substituted for the older version.
  • Only one spear would fit in the crate, so I placed the other one on the ground.

---------------------------------------------------

30071 Army Jeep (BrickLink - Brickset)

00000000000.png

LXF file

Notes:

  • There is no front torso print, and the face is a different print. Also, the helmet and stand are different (thanks to prateek for the design for the latter).
  • The placement of the antenna of the jeep is in the location shown the front of the instructions.

---------------------------------------------------

Oh, and Randal, I noticed that you used light lime (TLG calls it 'light yellowish green') for all of your Atlantis models instead of regular lime. The easiest way to get lime is to download Superkalle's LDD color chart LXF file (in this thread) - the greenish colored 1 x 1 brick all the way to the right of the line of plates is lime. :wink:

Edited by Calabar
Some link fixed

Share this post


Link to post
Share on other sites

@ILikePi

Argh... 11 new sets to index in a single post! :oh:

Admit it... you hate me! :tongue:

There are two or three wrong links (it is easy to find the right link however).

Nice work!

Share this post


Link to post
Share on other sites

Thanks Calabar! I've fixed the broken links.

And I don't hate you - something similar to what I did was bound to happen one day. :tongue:

Also, I've got a new set to post! Many thanks to KimT for the scans of the instructions, the box art (which I used to help make the preview image), and the images of the models (which helped me distinguish the colors of the parts). :sweet:

Fan Celebration V CubeDudes - Bounty Hunter Edition (BrickLink - Brickset)

000cubedude_final.png

Notes:

  • The light bley 2 x 2 turntable top on 4-LOM has been replaced with a 2 x 2 round plate because you cannot separate the two parts of the turntable in LDD.
  • The dark bley 1 x 1 brick with studs on two sides on Dengar's torso has been replaced with a 1 x 1 brick with one stud on one side because the side stud would not fit in a 1 x 1 Technic brick's hole.
  • A 1 x 1 round plate was added to the connection between both Dengar's and Boba Fett's backpacks and their backs because the 1 x 1 bricks with studs on sides would not fit in the 1 x 1 Technic brick's hole (located on the back of both CubeDudes).
  • All the bounty hunters' blasters - except Boba Fett's - had to be replaced with alternates because the Star Wars mold blasters do not exist in LDD.

You can download each CubeDude separately through these links:

4-LOM

Boba Fett

Bossk

Dengar

IG-88B

It was a really fun build, especially because I had been wondering how CubeDudes were built! :thumbup:

Edited by ILikePi

Share this post


Link to post
Share on other sites

Fan Celebration V CubeDudes - Bounty Hunter Edition

Excellent work ILikePi! As usuall the builder of CubeDues uses illegal techniques (technic brick with hole). I wonder if he at all knows about it? Anyway, the CubeDues are so cool. It's inspiring to see that a whole new concept to Lego building can still be invented. Only thing is that you have to look at the small guys head on, otherwise they don't look so good.

Share this post


Link to post
Share on other sites

Also, I've got a new set to post! Many thanks to KimT for the scans of the instructions, the box art (which I used to help make the preview image), and the images of the models (which helped me distinguish the colors of the parts). :sweet:

You're more than welcome.

You've done a really awesome job on this one :thumbup:

If you feel like taking on the CW edition, then I am (still) processing the instructions and the pics of the dudes that I've just done.

I'll be uploading them to my flickr later today.

Keep it up ILikePi and have one on me :wink:

Share this post


Link to post
Share on other sites

Thanks Calabar! I've fixed the broken links.

And I don't hate you - something similar to what I did was bound to happen one day. :tongue:

Also, I've got a new set to post!

It was a really fun build, especially because I had been wondering how CubeDudes were built! :thumbup:

This is VERY cool - thanks! One question - I couldn't find any way on LDD to generate a parts list. Is there a way to do this?

Edited by earl9371

Share this post


Link to post
Share on other sites

This is VERY cool - thanks! One question - I couldn't find any way on LDD to generate a parts list. Is there a way to do this?

Hi there

Most welcome to the LDD forum here on Eurobricks. Unfortunately there is no way to generate a part list within LDD. You can however use LDD Manager. Read more about it here.

PS: when you reply to a large post, avoid to quote the entire post. It just disruptes the flow of the thread. Please edit your post.

Share this post


Link to post
Share on other sites

Hi there

Most welcome to the LDD forum here on Eurobricks. Unfortunately there is no way to generate a part list within LDD. You can however use LDD Manager. Read more about it here.

PS: when you reply to a large post, avoid to quote the entire post. It just disruptes the flow of the thread. Please edit your post.

Thank you, Superkalle - I'm on it!

Share this post


Link to post
Share on other sites

Anyone made '10212 UCS Imperial Shuttle'?

I certainely will, once I find the instructions... And I don't think I'll be the only one.

Here's my latest :

10129 - UCS Snowspeeder.

ucs_snowspeeder.jpg

I had to take a few liberties for the cockpit front canopy, as the original pieces aren't in LDD. And all of the wedge plates are supposed to be the old style wing with the little nudge on one of the angles.

LXF File

It's a really nice looking one. I wish I didn't miss it, now...

Share this post


Link to post
Share on other sites

Some errors I noticed in the index post that I thought should be amended:

  • In the Architecture/Sculptures section, 3723 should be just titled "LEGO Minifigure".
  • In the Atlantis section, 8075 should be just titled "Neptune Carrier".
  • In City/Town/Discovery/Basic, 4032 should be titled "Holiday Jet" (assuming the Brickset database is correct here).
  • In Creator/Designer/Model Team, set #4956 should be titled "House".
  • In Pirates, 6240 should be titled "Kraken Attackin'" (with a "ck")
  • 5984 Lunar Limo and 5983 Undercover Cruiser should be under Space Police rather than just Space.

Don't have time to double-check all the names of Star Wars stuff, but this is still a fair number of changes that can be made. Also, it would be a lot easier to navigate if the models were organized within each theme by set number-- for instance, the set Kraken Attackin' has been built twice, yet there are a huge number of sets separating the two copies of the same set. If the Pirates sets were sorted by set number, that sort of problem wouldn't occur. It would also be easier to avoid building a model that's already been built, since you can just check whether a set by that number appears in that theme in the right spot.

Share this post


Link to post
Share on other sites

Some errors I noticed in the index post that I thought should be amended: [...]

Thanks for the remarks. I'll correct the index at next update!

When I construct the index, if the user seems to report data correctly, I simply make a copy-paste of that in the index, and check that only if something seems wrong to me.

So errors can easily happen, and that's way I request collaboration about other EB users that visit this thread.

About sorting sets by number, it is an issue we already deal with (see here).

The division of sets by theme aim is to provide users an "immediate view" of what kind of sets has been made, and a way to easily find a certain kind of set. In fact the organization is not exactly "strict".

I think original theme subdivision is too complex for this index, so I tried to provide a simpler one.

Edited by Calabar

Share this post


Link to post
Share on other sites

Thanks for the remarks. I'll correct the index at next update!

When I construct the index, if the user seems to report data correctly, I simply make a copy-paste of that in the index, and check that only if something seems wrong to me.

So errors can easily happen, and that's way I request collaboration about other EB users that visit this thread.

About sorting sets by number, it is an issue we already deal with (see here).

The division of sets by theme aim is to provide users an "immediate view" of what kind of sets has been made, and a way to easily find a certain kind of set. In fact the organization is not exactly "strict".

I think original theme subdivision is too complex for this index, so I tried to provide a simpler one.

Of course, and I understand how the "broad" theme categories help. I just wish, for example, all the Castle sets would be in order by number, as would the Pirate sets and so forth. For an example, I recently built The White House, just a little while after ADHO15 posted it. If the Architecture/Sculptures sets were ordered numerically, it would be with the rest of the #2---- Architecture sets and I would have seen it on the list before building it.

Edited by Aanchir

Share this post


Link to post
Share on other sites
If the Architecture/Sculptures sets were ordered numerically, it would be with the rest of the #2---- Architecture sets and I would have seen it on the list before building it.

Really, I can't see the problem. :look:

You have not to manually search for the set in the index, because the browser will search it for you (usually with CTRL+F, or with automatic search during digitation such as in firefox) in a while.

So, if you, for example, think to built set 6382, you only have to access the index page, press CTRL+F and type 6382: if the set is already indexed, it will be immediately found. :classic:

Note that usually the index is not updated to to the last post, so you should search both in the index than in the last pages of the topic to be sure a set has not already built! In the index (on the bottom part of the first post of the topic) you can find all infos about the last index update, including the last post checked.

Edited by Calabar

Share this post


Link to post
Share on other sites

5892 Sonic Jet

The light bricks and the mechanism don't fit in properly so I just left them to the side. :classic:

As general information, the front landing gear will not come down when using rotation tool. This is because the front wheel is a rotating element, and thus the rotation function cannot handle that. In other words, there is nothing wrong with the model. To lower the front wheel, temporary remove the wheel, lower gear, and put it back on.

Share this post


Link to post
Share on other sites

As general information, the front landing gear will not come down when using rotation tool. This is because the front wheel is a rotating element, and thus the rotation function cannot handle that. In other words, there is nothing wrong with the model. To lower the front wheel, temporary remove the wheel, lower gear, and put it back on.

What do you mean? The landing gear works perfectly fine for me. :wacko:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.