[KEY TOPIC] Official LEGO Sets made in LDD

[Calabar]

Index updated.

145 Sets has been added to the index (15 alternative, 23 duplicate, 0 incomplete).

Check your sets and report errors or inaccuracies in the index, if any!

1 Set has not been added to the index because Irregular.

Fix your sets in order to be added to the index!

2 new Themes added

New contributors

Kerilk - 8 sets

Vee - 2 sets

kcoon - 5 sets

Top contributors

penguinz - 45 sets

Stephan - 34 sets

vean - 22 sets

marco9999 - 13 sets

Gnac - 9 sets

Kerilk - 8 sets

kcoon - 5 sets

BEAVeR - 3 sets

List of Irregular Sets:

Lance - 7976 - Ocean Speeder - LXF missing, Image Oversized, Image Uncropped

blitzard - 70500 - Kai's Fire Mech - LXF missing, Image uncropped

omergalagever - n/a - Build a Camping Tent - Image oversized and uncropped

omergalagever - n/a - Build a Lemonade Stand - Image oversized and uncropped

omergalagever - n/a - Beagle - Image oversized and uncropped

PerryMakes - 10222 - Winter Village Post Office - Image Oversized - Minifigs missing

Bonehead74 - 6228 - Thornraxx - Details Missing, LXF missing, Image Missing

Inferno986return - 6094 - Guarded Treasury - Image oversized

elmerohueso - 10213 - Shuttle Adventure - Image Oversized

wipeoutzone - 8060 - Typhoon Turbo Sub - Irregular Post

Gear_tooth - 21008 - Burj Khalifa - Image Oversized

retroelectro666 - 21005 - Fallingwater - LXF missing, Image Oversized, un-highlighted set data

bbqqq - LIT2009 - LEGO Inside Tour (LIT) Exclusive 2009 Edition - Ole Kirk's House - aka 4000007. Not built using official instructions

bbqqq - 4000001 - LEGO Inside Tour (LIT) Exclusive 2011 Edition - Moulding Machines - Not built using official instructions

Stephan - 4000008 - Villy Thomsen Truck (LEGO Inside Tour Exclusive) - Unreleased Set

JunkstyleGio - 4841 - Hogwarts Express (3rd edition) - Enchanted Car only - un-highlighted set data

TEH EPIC BUILDER! - 1357 - Cameraman - Set Details and Image Missing

desrs6 - 6516 - Moon Walker - Irregular Image.

mikul - 6679 - Dark Shark - Image Oversized, Image not a Screenshot

omergalagever - 30222 - Police Helicopter - Irregular Image, Unhighlighted set's data, approsimative error list

jcrosser - 30222 - Police Helicopter - Image Oversized

elmerohueso - 8297 - Off Roader - Image Oversized, Unclear and un-highlighted set data

merman - 8065 - Mini Container Truck - Image Oversized

blitzard - 9591 - Weapon Pack - LXF missing, Image uncropped

merman - 42004 - Mini Backhoe - Image Oversized. LXF Missing.

blitzard - 9441 - Kai's Blade Cycle - LXF missing, Image uncropped

DenJansen - 7191 - X-wing Fighter - UCS - Link to the .lxf file is wrong

stark mark 5 - 9488 - Elite Clone Trooper & Commando Droid Battle Pack - Image Oversized

wlid - comcon030 - JEK-14 Mini Stealth Starfighter - San Diego Comic-Con 2013 Exclusive - Image uncropped

Luigi700 - 6703 - Minifig Pack - Image oversized

supergenius1337 - 6862 - Secret Space Voyager - Image Oversized and Uncropped, Unclear Set's data - Minifigs missing

pauldk - 483 - Alpha-1 Rocket Base - LXF missing, Image and LXF links broken

omergalagever - 70104 - Jungle Gates - Image oversized and uncropped.

cpt. Fist - 8856 - Whirlwind Rescue - Image Missing

Edited December 20, 2013 by Calabar

[wipeoutzone]

The answer is very simple: it violates the third rule about images in this topic (not read yet? ).

You can provide the rendering as an extra using a text link.

PS: note that the image as is now is not well cropped.

Okay I will fix, but

1. Didn't use CAD

2. Have read guidelines

[Calabar]

@wipeoutzone

Supposedly you used PowRay, and you are true, it is not a CAD software, it is used to render files created with CAD other software.

I thought the rule was comprehensible (at start, the rule says that the image have to be a simple screenshot), but I will remove the word CAD to avoid further misunderstanding.

Thanks for reading the guidelines.

I've seen you already replaced the image, but it was not cropped. In the meantime I converted it again in a text link.

PS: I'm going to update the index, if you are enough fast to fix your entry, it will be indexed.

Edited December 18, 2013 by Calabar

[wipeoutzone]

Where do I crop it?

[Calabar]

Not sure about what you mean.

You have to crop the image removing all blank stripes (both horizontal and vertical) around the subjects.

Anyway maybe you can find the answer in the guide I linked you some posts ago (this one).

PS: you should crop the image before resizing it, or the final result could be too small.

Edited December 18, 2013 by Calabar

[kcoon]

Where do I crop it?

hi wipeoutzone, what Calabar meant was do not indent your photos with white spaces around it. crop till the smallest possible where your left, right, top and bottom most point has at least a pixel that is not white :) download other summited photos for example.. took bout 30 mins to figure out what that rule was about :P. After you cropped the image, then resize it so that it's not more than 512 pixels on both horizontal and vertical :)

Also, i've completed work on my 6211 Imperial Star Destroyer , lacking only mini figures and it's already 10am and i'm late for work >.< i will add in the mini figures tonite and post it up !! :D

[Calabar]

@kcoon

Thanks for the help. If the rule about cropping is not clear I can rewrite it. I'm not native English and not ever I realize of this kind of things.

About the sets where you added minifigures, provide me an exaustive list (editing the post above). Today I will update the index in the post 3501, so I can index your sets as complete.

Edited December 19, 2013 by Calabar

[kcoon]

@kcoon

Thanks for the help. If the rule about cropping is not clear I can rewrite it. I'm not native English and not ever I realize of this kind of things.

About the sets where you added minifigures, provide me an exaustive list (editing the post above). Today I will update the index in the post 3501, so I can index your sets as complete.

Hi Calabar, okie i will add to all my sets tonite and update you later on. will add in a new set also 6211 to my list also tonite :)

[Calabar]

Hi Calabar, okie i will add to all my sets tonite and update you later on. will add in a new set also 6211 to my list also tonite :)

I mean to communicate me NOW the list of the topic that you will update adding the minifigures, so I can index that as complete even before you update your post.

For the new entry, remember to share it in a new post, not editing the old one.

[kcoon]

I mean to communicate me NOW the list of the topic that you will update adding the minifigures, so I can index that as complete even before you update your post.

For the new entry, remember to share it in a new post, not editing the old one.

Haha sorry.. just saw your message :) anyways i've added 6211 and the rest of my models i have added minifigures :)

[Vee]

Regarding this post, about house 4956, I am thinking about bricklinking it so I downloaded the model to take a look a it, compare things and I ended up liking the mod that Calabar provides along with the original design. But I have some questions:

- according to the BOM, Calabar uses 11 1x2 white bricks (that come with the set) plus 19 1x2 white bricks without pin. Is this an error or these "without pin" bricks are necessary instead of the regular bricks? Also, what is the use of a brick "without pin" that a regular brick could not do?

- the same happens with 1x4 white bricks: he uses 21 regular bricks and 2 "without pin".

- he uses extra 7 flat tile 1x2, engraved (code 59489), for the mod; is this correct? What is this "engraved" thing?

And a question not related to this house: what is the difference between flat tiles with groove and without groove? What is this groove for?

Thank you.

[Calabar]

@kcoon

Ok I'll remove the incomplete tag from all your entries.

But... please remove the set you added and post it in a new post.

@Vee

These are errors. I've to update my sets and I think I'll fix them when I'll do that.

About the engraved tiles, maybe I used the first suitable tiles I found!

Tiles with groove has a little step on the bottom part.

Edited December 19, 2013 by Calabar

[Vee]

OK, thanks for the explanations.

I was looking into your MOD and you used a trans-red panel 1x2x3, kind of a rare piece, not expensive, but rare, and so it makes Brickficiency's job tougher.

[kcoon]

Removed from my old post and re-added here :) the complete 6211 Imperial Star Destroyer :D

6211 Imperial Star Destroyer ™

Theme : Star Wars

Sub Theme : Episode IV-VI

Year : 2006

LXF File v4.3.8

Grouping is organized by each individual steps

1378 Pieces

Errors

* Bag 4 - Instruction No 24-8 - Book 1 - Page 47 - 41669 Bion. Eye unable to figure the correct angles to lock the bridge section to the body, so the bion eye was attached some where else nearby. ( If only i have the actual set to figure out how the lock works )

* Bag 5 - Instuction No 28-3 - Book 1 - Page 55 - 43898 Parabolic Reflector 24x6 is unable to go into 44358 Saucer Ball 3M

* Bag 8 - Instruction No 1-1 - Book 2 - Page 25 - 32195 St. Knuc Arm W Ball Soc 5,9 is not available in LDD replaced with 2 32017 Technic 5M Half Beam

* Bag 8 - Instruction No 14 - Book 2 - Page 30 - 70902 V-Belt 15, White is not available in LDD. no replacement

* No Stickers / Decals

* Wrong Minifigure Prints

=====================

Thanks Calabar for indexing the sets... :)

Here's my latest project

10221 Super Star Destroyer ™

Theme : Star Wars

Subtheme : Ultimate Collector Series

Year : 2011

LXF File v4.3,8

Grouping is organized by each individual steps

3151 Pieces ( i believe the last missing piece is the sticker ? )

Errors

* Instruction 34-5 - Page 38 - 55668 Outer Cable 64mm, Virtuel is replaced with 55856 Outer Cable 24mm

* Instruction 84-3 - Page 218 - 63864 Flat Tile 1x3 moved back 2 studs because of collision error

* No Stickers / Decals

* Wrong Minifig Prints

Will Share my other Creator Sets in the following posts :)

enjoy

Edited December 21, 2013 by Superkalle
Merged two posts

[kcoon]

Here are my Advanced Models sets on LDD

10177 Boeing 787 Dreamliner

Theme : Advanced Models

Subtheme : Aircraft

Year : 2006

LXF File v4.3.8

Grouping is organized by each individual steps

1196 Pieces

Errors

* No Stickers / Decals

10181 The Eiffel Tower 1:300

Theme : Advanced Models

Subtheme : Buildings

Year : 2007

LXF File v4.3.8

Grouping is organized by each individual steps

3427 Pieces

No Errors that i know off.. can't remember if there was stickers on this set ?

10214 Tower Bridge

Theme : Advanced Models

Subtheme : Buildings

Year : 2010

LXF File v4.3.8

Grouping is organized by each individual steps

4287 Pieces

No Errors

i Have a 10196 Grand Carousel, but i do not have the minifigs in it.. i will add the minifigs before i post up. :) Mean time thinking of what project to do next... either a 10030 Imperial Star Destroyer, 10143 Death Star II, 10212 Imperial Shuttle or 10225 R2-D2 :P

Oh i forget, i also had mini modular LDD-ed lolz

10230 Mini Modulars

Theme : Advanced Models

Subtheme : Modular Buildings

Year : 2012

LXF File v4.3.8

1352 Pieces

Errors

* No Stickers / Decals

Enjoy :D

[wipeoutzone]

hi wipeoutzone, what Calabar meant was do not indent your photos with white spaces around it. crop till the smallest possible where your left, right, top and bottom most point has at least a pixel that is not white :)

I understand what you mean now, but that's just impossible! I cropped it, but when I uploaded it to Brickshelf it wouldn't do the cropped version. Is it that big of a deal, because I don't know how to fix it.

[Calabar]

@wipeoutzone

Try removing the old (not cropped) image and then upload the new (cropped) one.

Otherwise, try changing the filename before uploading.

PS: the set is medium-size. When you will replace the image, remember to use an adequate size for it.

A 320-384 pixel should be a good width for it.

The "trick" is to crop and then resize the image, not vice-versa.

Edited December 22, 2013 by Calabar

[kcoon]

@wipeoutzone

try changing the file name and reupload :) that worked for me haha

[kcoon]

Okie finally finished work on my latest project.. this is the first time i completed this set on LDD :)

i hereby proudly presents

10030 Star Destroyer ™

Theme : Star Wars

Sub Theme : Ultimate Collector Series

Year : 2002

LXF File v 4.3.8

Grouping is organized by each individual steps

3095 Pieces

Errors

* 2607 Magnet Holders is not available in LDD. Replaced with 2920 Coupling Level

* 31059 Inv. Plate 2x2 For Magnet is not available in LDD. Replaced with 3022 Plate 2x2

* Some 3021 Plate 2x3 is replaced with Plate 1x3 due to Complex Collision Errors. All of them are situation on the wing construction near the engines

* 1 brick was not able to be place properly and removed when i loaded. thus missing 1 piece.

* No Label Stickers

Enjoy !

My next project would likely be a technic set :D

Edited December 25, 2013 by kcoon

[BEAVeR]

Is it allowed to enter a model that has building instructions, but never got released a a set?

I'm thinking about models that are displayed in official Lego Idea Books (set 697 for instance). Detailed building instructions are provided in those books, but there never were sets with all those pieces in one box. So is that an appropriate addition to this database?

And if it's allowed, under what theme, with which titel should it be credited?

Thanks in advance!

Edited December 31, 2013 by BEAVeR

[Calabar]

@BEAVeR

As you can see in the index, sets like those you are speaking of has been already posted.

If the set is official and official building instructions are available, it is allowed in this topic, with few exceptions.

The sets in this case will be indexed under the "Idea Book" theme.

Anyway it is preferable to build "classic" sets (and not only because these sets requires more work to be indexed! ).

Edited December 31, 2013 by Calabar

[efferman]

42024 Skip truck (with powerfunctions)

Theme: Technic

Year 2014

Parts: 941

lxf flie lxf flie V 4.3.8

Instruction book 1

errors:

6 x Part 6055626 (tires) is not included in 4.3.8, replaced by part 4184286

8 x Part 6055631 (axle 5 with endstop) is not included in 4.3.8 . Replaced by green 5L axles

2 x Part 4640742 (outer cable 2,4) is not included in 4.3.8, replaced with 2 Axle 4L

8 x Part 4654504 ( chain link) is not corect placed

Both Axle 8 with end stop on manual 2, page 26 (front of the cab) are not placed correct. move them one beam upward

Edited March 26, 2017 by Calabar
Broken Link- goes to different website and not lxf file. -> Now link has been fixed

[Calabar]

Hi efferman, and welcome in the LDD Official Set topic.

There is something to fix in your entry:

• Set's data has not been highlighted.
  
• The image is not well cropped. You should remove both horizontal and vertical stripes (do that before resizing the image).
  
• The set is huge, you can choose to use a bigger image, suggested size from 448 to 512 pixel width.
  
• The set appears incomplete, due to the lack of very evident parts. You can try to replace them missing parts alternatives ot brick build solutions. Otherwise the set will be tagged as incomplete.
  

Edited January 1, 2014 by Calabar

[efferman]

i have Updated the post, the file and the picture. is it now correct?

[Calabar]

Much better, thanks.

You only forgot to remove vertical blank stripes when you cropped the image.