Search the Community
Showing results for tags 'variable'.
Found 5 results
-
How do you check two variables
Monsbot posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I did program something with two "own Blocks" wich work together, but for that I need to check if the text entered in the text parameter of the first block matches the one of the second block. Basically I need to know how to check if "Text variable one" matches "Text variable two". Please comment if you know how to do that, or if you have any good alternatives, currently I use numbers, but that's hard to keep track off. Edit: I program in Mindstorms Ev3 with the Ev3 brick -
"Sir, we don't have the firepower." "Use the Scout Walkers!" -Imperial comm intercept The Variable Terrain Scout Transport is the first walker in the Variable Terrain family. Originally, the head of the walker was meant to be placed on an Imperial armored vehicle (currently a still on-going project) as a turret; however, the turret was deemed unsuitable with the vehicles designed (though it could still be used as a turret), so it was decided to use it in a pint-sized scout walker. With this in mind, inspiration was taken from the 2016 AT-ST in regards to the legs. The overall design is similar, albeit shrunk to about half the size in most of its proportions. I'm satisfied overall with the design, though as a cockpit for a walker, I find the controls a bit lacking (as I'd prefer a bit more); I also wanted the twin cannons in front to be able to articulate up and down like the AT-ST, but I thought it was low enough to not matter much (as well as having the side armament compensate a bit for this)- due to its connection method, the twin cannons can be modified with bars and clips to articulate, similar to the ones on the VT-IT. Th VT-ST is armed with twin heavy blaster cannons, as well as a missile launcher on each side, all in a fixed forward position. It is also equipped with a grenade launcher on either side that can articulate in multiple directions, as well as a short range comm antenna. SW Imperial VT-ST #1 by Jonathan Wallace, on Flickr SW Imperial VT-ST #2 by Jonathan Wallace, on Flickr SW Imperial VT-ST #3 by Jonathan Wallace, on Flickr SW Imperial Turret #1 by Jonathan Wallace, on Flickr SW Imperial Turret #2 by Jonathan Wallace, on Flickr SW Imperial Turret #4 by Jonathan Wallace, on Flickr The cockpit, as a consequence of its origin as a turret, is equipped with a joystick control, a holotransmitter, and a control panel. SW Imperial Turret #3 by Jonathan Wallace, on Flickr The VT-ST is the mainstay of the Variable Terrain line, and they make up the bulk of the various VT models assigned to Imperial units in the field. Although Brickthana Engineering hoped its VT line could be a competitive alternative to All Terrain family, various issues from production problems to under-performance (among others) hampered its chances, and Brickthana eventually accepted its current place, and began focusing on smaller and more well-defined and in-depth projects. If you want to build this for yourselves, here's the instructions: https://drive.google.com/open?id=1JwnhA1YJRbazR8FXOoOl8Yh4ctVuPn4O As usual, any feedback would be much appreciated
-
"We got walkers!" "Don't worry, they're just eye-tees" - Rebel radio chatter This simple MOC is part of my VT family of walkers, being a sort of offshoot of my original VT-PT prototype, and is based off of the walker in the Imperial Trooper Battlepack (in a kind of roundabout way). Envisioned as a more armed and protected reconnaissance walker by Brickthana Engineering, the Variable Terrain Infantry Transport featured similar construction to both its bigger brother the VT-PT, as well as turrets used by both Imperial and Rebel forces. Unfortunately for Imperial forces, combat performance for the VT-IT fell below expectations and they were often stripped for parts for both VT-RT and VT-PT walkers by the units they were assigned to. Brickthana desperately tried to prop up the walker's abilities, but they finally yielded to the operators' preference for previous reconnaissance walkers and shut down production. After a time, and still having many of the walkers still in warehouses, Brickthana began work on a successor to the VT-IT; this second attempt has four legs, and is planned to have room for at least two or three troops onboard. Retaining the same weapon loadout as the original (or an equivalent one), this version is thought to be a direct response to both the lacking performance of the first one, as well as the Rebel's Scorpius Mk I. The VT-IT is armed with a two twin missile launchers, as well as a chin-mounted twin light blaster cannon; it's also equipped with a powerful, and detachable, communications array. SW Imperial VT-IT #1 by Jonathan Wallace, on Flickr SW Imperial VT-IT #2 by Jonathan Wallace, on Flickr Inside the cramped cockpit, the VT-IT has a pair of joystick controls, a weapons sensor, a targeting array, and a holotransmitter. SW Imperial VT-IT #3 by Jonathan Wallace, on Flickr If you want to build this yourselves, here's the instructions: https://drive.google.com/open?id=1oek7pVqNSDlEji5pPW4taSax8E0mxqr1 As usual, any feedback would be much appreciated
-
"Although versatile, Imperial Scout walkers are not all-powerful. We need dedicated Patrol walkers, and soon." -Commander Selm The second walker in the Variable Terrain family, the Variable Terrain Patrol Transport was the result of designers blending the plans for the Scout Transport and Recon Transport together into one composite idea. The various STs were implemented in a variety of roles that they were not necessarily suited for, leading to mission proficiency dropping. Although some tasks could be taken over by the complementary RTs, there still exists a gap between the two where a new walker would hep the mission profile. Thus the VT-PT was born. Designed to work well in both urban and open environments, it features increased armor and a more robust armament than its counterparts, in addition to a fairly quick speed thanks to its reinforced legs and servo-motors. The main armament is flexible Heavy Blaster Cannon with a wide arc of fire, with the secondary armament being the twin missile launchers on either side. In addition, the VT-PT also has an advanced forward sensor and a redundant communications array for keeping in touch with command and other patrolling forces. SW Imperial VT-PT #1 by Jonathan Wallace, on Flickr SW Imperial VT-PT #2 by Jonathan Wallace, on Flickr Although simple, the walker is equipped with an on-board AI to aid the pilot. SW Imperial VT-PT #3 by Jonathan Wallace, on Flickr Many features are shared between the VT-PT and the VT-ST, including a general interior layout. SW Imperial VT-PT #4 by Jonathan Wallace, on Flickr A look inside at the targeting controls, sensor gauge, and holo-transmitter. SW Imperial VT-PT #5 by Jonathan Wallace, on Flickr Overall, this was meant to be the equal of the VT-ST, fulfilling a similar role while carrying a different weapons load out and leg structure. If you want to build this yourselves, here's the instructions: https://drive.google.com/open?id=1ukXIVIj0IrDZYed7qi6PywzJW8DTJlSV As usual, and feedback would be appreciated
-
"Not as pompous as claiming 'All Terrain', we instead provide... variability." -Brickthana Engineering Executive Following the increase in the numbers of Rebel groups, the Galactic Empire needed more equipment to deal with the new threat, and turned to numerous companies to fill the gaps. An alternative to the 'All Terrain' family of walkers, the Variable Terrain series was meant to be a cheaper, more easily produced addition to Imperial forces. Part of this initiative is the Variable Terrain Reconnaissance Transport, a group of walkers designed to supplement their AT counterpart in a variety of ways. While following a superficially similar design, Brickthana has tried, with varying degrees of success, to expand the mission capability of its walkers. To try and compete with Rebel designs, versatility was a must for these new vehicles being made. First up is the initial prototype of the VT-RT concept, eventually getting the designation of 'VT-RT(L*)' and be the basis of the VT-RT(X). Although broad/blocky, a design 'flaw' inherent to many of the VT family, the aim of the designers were to add more protection to both the driver and the important components of the walker itself. Eventually these walkers would be replaced, seeing some use as turrets after modifications. SW Imperial VT-RT(L) Prototype #1 by Jonathan Wallace, on Flickr SW Imperial VT-RT(L) Prototype #2 by Jonathan Wallace, on Flickr The second walker of the RT series is the VT-RT Experimental. Being dubbed the 'Expendable' by its drivers, the VT-RT(X) was a further step in trying to get as much from its frame as possible, with four versions being created. While all had the same base model, they could be modified into the different versions to operate in different mediums- these being the standard land configuration (Experimental-Land), an amphibious configuration (Experimental-Sea), an aerial configuration (Experimental-Air), and finally one meant for use in space (Experimental-Vacuum). Issues plagued the RT(X)- from certain system malfunctions to poor handling, eventually forcing Brickthana to review the design and begin work on a new version of the walker. The third walker of the RT series is the RT Heavy. The biggest of the three 'standard' VT-RTs, the RT(H) design was completed first. Meant to be a versatile infantry support vehicle, it ended up not performing to expectations, though it was still useful in its role. While it does have some amphibious capability, it was not equipped like the RT(X-S), and therefore is not as reliable in the water as its cousin. To compensate for some of its deficiencies, it is armed with a heavy blaster cannon and two detachable grenade launchers, as well as a more powerful transmitter. SW Imperial VT-RT(H) #1 by Jonathan Wallace, on Flickr SW Imperial VT-RT(H) #2 by Jonathan Wallace, on Flickr SW Imperial VT-RT(H) #3 by Jonathan Wallace, on Flickr The fourth walker of the RT series is the RT Medium. The RT(M) was something of a misplaced design, as originally there was only two sizes that the RT would come in. This changed when it was decided that a design in the works (a troop transport) needed better escorts, and the RT(M) was created. In addition, there was an explicit order to try and incorporate parts/sections of one into the other, to ease production and interchangeability. While it was initially proposed to have a rotating bottom, to be converted into a turret, this was denied. Though it was mounted on a pair of legs, the body retained some of its features as a turret, including its armored sides and controls that can fold forward. SW Imperial VT-RT(M) #1 by Jonathan Wallace, on Flickr SW Imperial VT-RT(M) #2 by Jonathan Wallace, on Flickr SW Imperial VT-RT(M) #3 by Jonathan Wallace, on Flickr The fifth and final walker of the RT series is the RT Light, the most direct counterpart to its AT compatriot. The RT(L) was designed to be a well balanced machine, combining decent armament, speed, and protection. Like its bigger brother the RT(H), it can float, however it wasn't designed with this explicitly in mind, and therefore has no propulsion; furthermore, if rocked too much, it can easily tip over and sink. SW Imperial VT-RT(L) #1 by Jonathan Wallace, on Flickr SW Imperial VT-RT(L) #2 by Jonathan Wallace, on Flickr SW Imperial VT-RT(L) #3 by Jonathan Wallace, on Flickr A semi-addition to the RT project is the RT Droid, an automated bi-pedal walker. The VT-RT(D) is in a sort of grey area, and so is not fully included with the rest of the RT walkers. Instead, it's been put with other Brickthana droids, and may even have its designation changed. SW Imperial VT-RT(D) #1 by Jonathan Wallace, on Flickr If you want to build any of these for yourselves, here's the instructions: VT-RT(X): https://drive.google.com/file/d/1yff351-w3sy1eyjQWu0awe88lGsyM2Nk/view?usp=sharing VT-RT(H): https://drive.google.com/file/d/1wtnQpUb9V0GD_j1_cZuB9T0KiSRMrKJQ/view?usp=sharing VT-RT(M): https://drive.google.com/file/d/1gJOcc4ppMsbLF82g1kfIGiZ7wjpzxWR3/view?usp=sharing VT-RT(L): https://drive.google.com/file/d/1tipChHxhxKB54LxdCGOvqzqOZEkCfRVs/view?usp=sharing As usual, any feedback would be most appreciated! P.S. As far as the VT-RT(D) goes, you can see more pictures on Flickr, and I plan on including it in a topic with other Imperial Droids I'm currently working on.
