Search the Community
Showing results for tags 'miniature'.
Found 8 results
-
[TC18] Miniature Muscle car
Zerobricks posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I wanted to make a small scale supercar model in the same scale as the Corvette. The TC18 was a perfect excuse to make a model with the following functions: 4 speed gearbox full working suspension a fake V8 engine working steering wheel openable doors Here is what I managed to create in LDD, inspired by the set 42111. I wanted to style the car like a 70's muscle car, so the fenders are brick-built to get the sharp lines needed. The final car is 40 studs long and 15 studs wide (excluding the mirrors). All of the described functions are implemented, the car is currently made out of around 900 pieces. I will post the WIP pics of the real build as soon as I start it. -
For an exhibition I made a small Corvette-scaled car with an RC motor powering rear wheels. Powered by Buwizz, that model turned to be totally uncontrollable, with epic amount of oversteer at low speed and underster at high speed. So I got an idea. Why not make a 4x4 version of a miniature car? My worries were that the added complexity needed to power the front wheels will increase the complexity, weight and reduce the performance... But I decided to give it a shot anyway. The first version used a chain drive to front the front wheels from the rear axle, but that was soon scrapped due to the poor strength of the chain. So after replacing the chain drive with an axial driveline, I came up with this little, yet powerful model. The front wheels are an older 49,6 x 28VR type which use softer rubber than the rear ones. This way the car tends to oversteer less: In the rear DUAL 49,5 X 20 are used to give it as much traction area as possible: The bodywork can easily be removed to expose a torque-tube sytled chassis and a simple interrior: A servo motor steers the front wheels via a rack. Maximum steering angle is around 22,5 degrees: 3x11 panels are used as the main chassis, giving the model very high rigidity, while keeping the weight low: According to LDD the model is made of less than 400 bricks, less than to the upcoming 42109: The front wheels are powered directly by the rear axle via 20:12----12:20 gear sequence. There are no differentials, since the model reaches high enough speeds for wheels to understeer and slip in the corners anyway. Technical specs: Length: 25 cm Width: 14 cm Height: 10 cm Weight: 575 g Theoretical top speed: ~18 km/h Even with 4x4 drive, the racer still powerslides all 4 wheels even in just the normal mode, as you can see in the quick and drity slo-mo gif I made: I was pleasantly suprised by the amount of control you get with the added FWD. No longer am I at the mercy of the rear wheels to stop the car from crashing into a wall. Accelreation is of course much better, making this one of the fastest accelerating models I made. Oversteer has been reduced, but there is still plenty of power left to powerslide the model with all 4 wheels spinning. Stay tuned for a proper video showing off the performance soon.
-
Hi everyone This is the first time I've posted a MOC in the train forum and although these models are not trains, they are still locomotives of a sort and I thought this would appeal to train and especially steam fans. "Miniature Steam Machines" is my collection of 3 steam engines designed at a small scale. I set myself a challenge to see if I could build these little engines using a very limited amount of bricks but still maintaining a decent level of detail. They are all very small. The biggest of the 3 models only contains 128 bricks. Traction Engine The Traction Engine is the smallest of the 3 models and only uses 82 bricks. The basic structure of this model forms the basis for all three models and this one in particular is intended to represent a miniature version of my LEGO IDEAS project, The Old Workhorse - Traction Engine. Steam Roller The second model is a steam roller and this one is made from 109 bricks. Showman's Engine The third model is a Showman's Engine. This model is the biggest of the 3 and contains 128 bricks. I designed these mini models to act as a sort of side project and to help promote my LEGO IDEAS model called "The Old Workhorse - Traction Engine". This a much bigger and more detailed model. Here is a picture showing the mini models alongside the Old Workhorse. If you're interested in reading more about The Old Workhorse then it has its own topic here on Eurobricks. The Old Workhorse - Traction Engine If you like the model I'd also be massively grateful if you could please vote for it over on LEGO IDEAS at the following link. https://lego.build/2vRfVGL Many thanks for reading and I hope you like these models.
-
Hello Everyone, this is my first post here, so apologies if I made any mistakes! I was going to post this model on Lego Ideas, but (not surprisingly) Game of Thrones is not suitable content for them, so I decided to post it here and see what you guys think. This is a (not so small) scale model of the castle of Winterfell from George R. R. Martin's epic fantasy novel series A Song of Ice and Fire, and more specifically, a model of the castle as it appeared in HBO's award winning tv series Game of Thrones. In the series, Winterfell acts, (most of the time) as the home of house Stark, one of the main noble families in the fictional land of Westeros. Winterfell is seen often throughout the series, and stood out to me among all the other places in Westeros, not just because of its prominent role, but because of its unique design and architecture. Many of the castles we see in movies and on tv look amazing, with their numerous gold turrets, towers, large windows, and vast balconies, but all these features make the castles relatively unrealistic in an actual medieval setting. It is because Winterfell lacks these common features on fictional castles that it stood out to me so much. In the real medieval era, most castles were not very opulent, and had pretty plain, utilitarian exteriors. If you think about this, it makes quite a bit of sense, as putting all your wealth on the outside of your castle meant it could be damaged or stolen if you are attacked. I know, I know, most fantasy tv shows and movies aren't going for historical accuracy, including Game of Thrones, (I love seeing dragons flying around as much as the next guy) but that doesn't mean I can't appreciate when the creators do make things look as though they actually might in the given time period. I based this model off of the scale desktop model of Winterfell you can buy online (just search google for: Winterfell sculpture, and you'll see a few pages with it), and it includes all the main features of the castle, including the Winterfell Godswood, with the Weirwood tree and broken tower. I am quite pleased with the way the Weirwood tree turned out, its a new design that I haven't used before, maybe some of you have, but I hadn't, and so was quite pleased when I came up with it. Despite my best efforts, this is a large model, measuring approximately 2 feet by 1 foot, and comprised of 3046 pieces. If any of you want to build the model, a link at the bottom of this description will bring you to a folder with the full size images of the model, a bricklink parts list, a .io model file for the Stud.io lego design program (my personal favorite), and a .ldr model file for use with Ldraw. I do not have a .lxf file for use in Lego Digital Designer, as this model uses some newer bricks not in that program, so I apologize for not being able to offer that to those of you who use LDD. If you do build the model, please send me some pictures of it! As with my Hogwarts model, I don't have enough pieces to actually build it, so it would be awesome to see a real model if any of you are more fortunate with your LEGO collections than I am :). Also, feel free to share this with anyone you want and post images of it, as long as you remember to give credit to me as the model's creator, and provide a link back to this post. I will most likely be posting this model on Rebrickable as well, but I need to create instructions for it before I can do that, and that's the boring part of model making, so I'm procrastinating it :), A link to my Rebrickable page where you will eventually be able to find it will be posted beneath this description as well. And finally, here is the link to that folder with all the files mentioned above: https://drive.google.com/drive/folders/1pb0hN4USgPyKzkSvDyXeKFhb4Nkczwxq?usp=sharing and to my Rebrickable MOCs page: https://rebrickable.com/users/EthanBrossard/mocs/ and here are the images! winterfell lego with logo3 small by Ethan Brossard, on Flickr winterfell lego #0 small by Ethan Brossard, on Flickr winterfell lego #1 small by Ethan Brossard, on Flickr winterfell lego #2 small by Ethan Brossard, on Flickr winterfell lego #3 small by Ethan Brossard, on Flickr winterfell lego #4 small by Ethan Brossard, on Flickr winterfell lego #5 small by Ethan Brossard, on Flickr winterfell lego #6 small by Ethan Brossard, on Flickr winterfell lego #7 small by Ethan Brossard, on Flickr winterfell lego #8 small by Ethan Brossard, on Flickr winterfell lego #9 small by Ethan Brossard, on Flickr winterfell lego #10 small by Ethan Brossard, on Flickr winterfell lego #11 small by Ethan Brossard, on Flickr winterfell lego #12 small by Ethan Brossard, on Flickr winterfell lego #13 small by Ethan Brossard, on Flickr winterfell lego #14 small by Ethan Brossard, on Flickr winterfell lego #15 small by Ethan Brossard, on Flickr winterfell lego #16 small by Ethan Brossard, on Flickr winterfell lego #17 small by Ethan Brossard, on Flickr winterfell lego - winter small by Ethan Brossard, on Flickr Thank you in advance for any feedback/advice! Ethan
-
<img srx = "https://www.flickr.com/photos/126624868@N07/26653529419/in/dateposted-public/"> Our local library holds an event once a month called bricks and beer. My brother and I had just been talking and setting Legos down to see if anything struck us. This is the result <img src = "https://www.flickr.com/photos/126624868@N07/26653529419/in/dateposted-public/">
-
This is my addition to the Skyline series, a version of my home city Belfast. I have tried to design it to be as close to the official sets as possible in both its size and level of detail. Like the six official sets, it contains four major landmarks, which have been designed to be in proportion (as far as possible) with each other. This image was rendered from Digital Designer, as some of the pieces which would be needed do not exist in the required colours, there is also a space for the printed Belfast name plate. From left to right, they are; 1) Belfast City Hall The smallest building in the set, the City hall features some sand green elements which (to my knowledge) do not yet exist. There are many memorials and statues in the grounds of the building, but I have chosen to represent the most prominent one which is of Queen Victoria. 2) Samson and Goliath The two cranes which stand in the Harland and Wolff ship yard, in reality they are in fact different sizes, but I have chosen to make them the same height. In reality they would need printed "H & W" elements to complete them. 3) Titanic Belfast The museum to the RMS Titanic is the third building and would also need a printed "Titanic" sign on the brown piece. Beside it is the SS Nomadic, a vessel from the same era as Titanic which acts as a small museum. 4) The Obel Complex Obel Tower is Belfast's (and Ireland's) tallest building, so it was a natural choice for the set, the curved pieces for the windows do not exist in trans. blue. Outside is what locals call the 'Big Fish', an art installation. Thanks for looking, and all comments and constructive criticism are welcome!
-
Yellow fever - powered by Buwizz
Zerobricks posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi guys! Here's a demonstration model I built to show the potential of Buwizz. There were several goals for this model: Keep it small and light Gearing should be as simple and efficient as possible - ended up using a 40 tooth gear powering the older style differential, getting a 40/:16 gear ratio Advanced steering solution - pivot point is inside the wheel and the car is using ackermann steering geometry for best possible steering and efficiency Use Buwizz as a structural support - not only does the Buwizz power and control the car, it also helds it together Working steering wheel and openable doors - have them too Here's the result: In the gif below you can see the way the car is built and how the steering system works The end result is a very fast and maneuverable car that faces same problems as the big ones. Its actually so fast, that its easy to understeer at high speed or oversteer when accelerating. Controling it at high speed can be very hard, but thanks to Buwiz's different speed modes you can easily slow down the car. This is very usefull for parking or precise maneuvering. To finish up with a bang, here's a video: If there will be enough demand I will create an LDD model of this little speed devil -
Hello, I am currently working on miniatures. I would like to present my miniature version of the "Kölner Dom" / Cologne Cathedral: I hope you like it! Yours ArchitectureFan
