Search the Community
Showing results for tags 'lady'.
Found 6 results
Thomas the Tank Engine - MOCs of locomotives and rolling stock
Murdoch17 posted a topic in LEGO Train TechBuilders note on the following models: These engines were my most beloved thing to watch in childhood up until the Polar Express movie came out to displace it in 2004. I loved to play with my wooden railway models, and would have thought I'd have died and gone to heaven if I'd had the Lego models described below when I was little, around the time the movie came out when I was 6 or 7 in 2000 / 2001. So, in short, look on, younger Murdoch17 and gasp at what you've been able to accomplish with the help of many others and quite a few years of knowledge and learning. I still am a passive Thomas fan, BTW, (my collection of books is still around somewhere!) but everything after the switch from the models to CGI turns me off., so I haven't watched the show in 10 years, just in case anyone is wondering. Oh, and the Polar Express models by @SavaTheAggie were what inspired me to get this serious into LEGO trains in 2011 or so, so I've come full circle - from Thomas to Polar Express from the movies, then from Polar Express and back to Thomas the long way round via LEGO. LADY the magic engine + coaches Here is Lady the steam loco and her train consisting of two (custom) coaches Victoria and Elton, driven by Burnett Stone and Mrs Conductor. They travel between the worlds of Sodor, our world (circa the year 2000), and many other rail-gateways, to bring the vital magic gold-dust, paying passengers and small amounts of cargo to their respective destinations in the multiverse. It's a difficult and dangerous job (especially with Diesel 10 on the prowl) , but somebody's gotta do it. This model was originally Hunter Dobbs steam locomotive and is based off of "Lady" from Thomas And the Magic Railroad (you know, the 2000 Thomas And Friends film that sadly, flopped horribly.) I redid the boiler using @ScotNick design from the BR Class 9F 2-10-0. Here is a link to Hunterdobbs' original engine. Fictional background (from Thomas and friends wiki) for this engine, as seen in the Magic Railroad movie. (Also, the figure in the cab of the engine is a representation of Burnett Stone, caretaker and driver of Lady, as played by Peter Fonda in the 2000 movie.) Lady once came to the Island of Sodor a long time ago, when she was found by Diesel 10, an evil diesel engine who wanted to destroy her. Lady and Burnett Stone both ran away from Diesel 10, but during the chase, Burnett used up all her coal and made her go too fast, causing Diesel 10 to catch up and crash her. Lady was taken back to Muffle Mountain and stored inside Burnett's workshop, where he spent years desperately trying to restore her to working order, but he did not have the right coal to make her steam. Years later, Lady was still out of service, and without her, the Magic Railroad began to lose its magic. That all changed when Lily, Burnett's granddaughter, and Thomas brought a truck of coal from Sodor to Muffle Mountain, which proved to be the correct coal necessary to make her steam. Lady came back to life and returned to Sodor, where she was once again chased by Diesel 10. Lady, Burnett and Thomas successfully managed to escape Diesel 10, and she gave the Conductor Family the Gold Dust they needed. As a side note, while watching Thomas and the Magic Railroad as a kid back in the early 2000's, I always wondered how it was supposed to be a technical railroad if Lady (the magic steam engine who powered and ran the warp-gate railway) had no coaches for people to sit in. She had a station on Sodor, and one on in the real world in the form of her owner's workshop, (as explained in the movie) but where were the coaches she most likely used to deposit people at these points? Well, now there are two brand-new coaches ready for service! The rear of the loco, with the red headlamp. These cars have been named Victoria and Elton. These names were chosen for several reasons, but mostly for these facts: Victoria was because of when Lady was supposedly built (in the 1890's) in "Thomas and Friends" canon and that is who was Queen at that time. Elton because I was listening to a good Elton John song ("This train don't stop here anymore") and decided then and there he was going to model the second car. So, we have a stuffy, quiet-loving type coach of the late 1800's, and a flamboyant, lovable, with a passion for singing out load coach from the 1890's, but with the heart and soul of Elton John. Oh, and they are both painted bright magenta to match Lady, who is still driven by Burnett Stone, but conducted by a female version of the Mr. Conductor character from the Magic Railroad film. Burnett Stone (Played by Peter Fonda in the 2000 movie) and Mrs Conductor (played by a actress as yet unknown... fill in your favorite one!) DIESEL 10 the antagonist of the Magic Railway film This 6 wide BR "Warship"class with hydraulic claw (AKA Diesel 10) model has been heavily modified by me from a old Class 37 file by LazarusBricks to have new removable roof sections for the cabs with seats for figures and cab controls. As you can see, I chose to leave off the face to keep the engine more in line with the rest of my locomotives. The rear of the locomotive. This in-universe background info is from the Thomas and friends wiki and concerns the events of The Magic Railroad movie (though he is still in the TV show to date, unlike his opposite number, Lady the magic steam engine): Diesel 10 once visited the Island of Sodor a long time ago, and caused trouble for the steam engines while he was there. During his visit, he found Lady, the engine responsible for keeping Sodor alive, and chased her, making her crash. Following the accident, Lady's caretaker, Burnett Stone, hid Lady in his workshop and tried to restore her, but failed to bring her back up to steam. Several years later, Diesel 10 came back to Sodor when the Fat Controller was on holiday, intending to destroy Lady forever. He was first seen by Thomas and Gordon when he raced past them at Killaban Station, and brought his two lapdogs, Splatter and Dodge, to the railway, who were present when he was scheming. He caused several problems for the steam engines, such as dumping sneezing powder around Tidmouth Sheds and later destroying the scaffolding that had been placed beside the shed. When Mr. Conductor travelled across Sodor to find the windmill, Diesel 10 found him and held him over the Big Dipper, intending to drop him. However, Mr. Conductor managed to escape by cutting one of the hydraulics hoses to his claw with a pair of wire cutters, causing him to fling Mr. Conductor across the island and to the windmill. Diesel 10 was later present at the Coaling Plant, where he was covered in coal when he was teaching Splatter and Dodge “how to stop being stupid”. After Junior flew in the air after riding the windmill's sails, he landed on Diesel 10's cab, who raced across the island and to the smelter's yard, where he tried to push James and Junior into the melting pit. Fortunately, Junior and James managed to escape by using the last of the former's gold dust. After Lady was brought back up into steam and returned to Sodor, Diesel 10 found her and began to chase her, Thomas and Burnett across the island, until they reached the viaduct, but not before Splatter and Dodge betrayed him. Lady, Burnett and Thomas managed to cross the viaduct safely while it was collapsing, but it had already done so by the time Diesel 10 came over it and he plunged into a barge of sludge below the bridge, and was sent away in disgrace. The roof of both front and rear facing cabs can bee removed to place figures in the driver's seats. The rooftop arm can raise and lower, and the claw itself and open and close. Here we see it in the raised and open position. THOMAS the tank engine + coaches My newly revised Thomas is based off these instructions from Block Junction, albeit in heavily modified form. Thomas' two coaches Annie and Clarabel are my own design, and were built almost totally from my own parts collection - only wheels and buffers were purchased for them. The front of Thomas is lacking a face, but I'm not concerned about that... I says he's sleeping when kids ask at trains shows. The rear of the famous tank engine. There is a bit more inside printed details this time for his cab controls. The car on the left (Clarabel) is mostly passenger seating in the front three-quarters, with the guards compartment (and luggage storage) in the rear-most section. The other coach (Annie) is meant for passenger seating only. PERCY the small engine This rendition of Percy, the 0-4-0 saddle tank steamer from the Railway Series books and Thomas and Friends TV show was heavily inspired by the Lgauge website's Percy model (as seen here) However, I added Big Ben Bricks green medium wheels to make it stand out, plus working pistons whereas the original had only 9v powered wheels and no real pistons. Rear view, with the cab controls visible. As for cars for Percy to pull, I have two mail cars already built from late last year. MURDOCH the heavy goods engine I originally built the model in late 2013 based off this unfinished 9F Murdoch model by @ScotNick. It was uploaded on Brickshelf first, and later on Flickr after I uploaded my copy (LDD only, at first) in November 2013. When I had redesigned the engine to build it IRL, I realized orange had virtually been eliminated as a color choice at that time. Windows were (up until that summer when CITY Arctic dropped) only from the 2004 BNSF loco, and orange was VERY expensive as a color. It was impossible in the correct color. Orange's pallet of parts would increase in the intervening 8 years, culminating in 2022 with every orange part I needed being buyable! The rear of the tender with the number 17 on it. A view inside the cab. GORDON the big engine + coaches First off: I did not design this steam engine! I modified it heavily to suit my tastes from this Eurobricks post (link) from user @damangos. I did, however, rework my original 7 wide Emerald Night tender from 2014 instead of the 6 wide tender used by damangos in the original model, and I also reworked his model to suit my tastes and be cheaper, although it has one set of wheels too many. (it should only have three axles) The tender has also been changed from a corridor tender to a Fowler tender, with the flared ends added on. The engine on the other hand, is modeled in blue, and is numbered "4". As you can probably guess, this is Gordon from the Railway Series books and the Thomas and Friends TV show. Cab details include opening firebox and space for a shovel. These five passenger cars (four regular coaches, and one guard's coach) are inspired by the 2018 Hogwarts Express coach, to save money on wheels and train car bodies / frames. They don't have any of the interior details the Hogwarts Express has, though. I based the colors of the coaches on a inverted set 10194 (Emerald Night) coach color scheme. I always thought the colors looked better like this, and it avoids the problems of the tan 1 x 4 x 3 train windows used in the original set. (which are very expensive!!) (EDIT 3/523: added real world photos of my completely-updated Thomas and his finished coaches.) Have any Thoughts, Comments, or Questions? All are welcome here!
[MOC] Looking out to Sea
jtooker posted a topic in LEGO Historic ThemesLooking out to Sea A woman looks longingly out to sea for the return of her beau. I created this 8x8 MOC for LowLUG’s Mega Medieval MOC Mania (MMMM) contest. I tried a new technique for the water. I initially wanted to avoid using the large clear panes and use a ‘pile’ of random transparent parts, but I was unable to stack or connect them at odd angles. So I went with just dumping various blues and clear pieces, but this almost completely obstructs the underwater vegetation and creatures. Website | Flickr | YouTube
[WIP] Technic Lady figures
syclone posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingGood Day! Since first seeing Technic figures in a catalog back in 2005, I really wondered whether there was a female version as well. Unfortunately , as we know , there are none. This problem is solve-able either modifying an original lego part (which will decrease the number of those in existance) or making your own. As a purist almost , I would choose the second version. I was surprised that no one has done this before (there is a broken link to a japanese website where someone done that in 2000's, but no pictures to be found anywhere), I took my free time to make a quick mock-up. First step was to get the torso and head into my 3D program - Autodesk 123D - from LDraw. That was done using LDView (place part in x=0, y=0, z=0 and export the file containing it through LDView as an .stl). Next was the chest, which was done using a few spheres, lofted surfaces and tubes (I tried not to exagerrate the size too much, just for it to be slightly notice-able). Luckily there were mannequin's side & top-down shots for inspiration. Next I exported this hair piece and scaled it up to approximate size & placement. Please note that I'm a noob at 3D modelling, and my "art side" is non-existent (for me it would be easier to draw a mechanical piece as a blueprint rather than a human being), so I would love to hear any suggestions and ideas. I do eventually plan to upload the finished model to Shapeways, but I can send it via e-mail. Question: Do you think the "reduced"? waist (as the one printed on minifigs) is necessary? Images:
Hello! I'm Wesden and I'm sharing my love for Legos with m
wesden posted a topic in Hello! My name is...I was a child of the 70s, when toys were simple, creative and fund, and that's what I'm passing along to my little tater tots who are 4 year old b/g twins. They are so excited to grow their Lego world, but not as excited as mommy :) I am obsessed with minifigs, a handful which I am still trying to procure at a reasonable price - but I know serier 14 will come out and I'll want all of those :) I have build a Lego City for my kids and tend to it every morning and evening to "tidy up" - it's a labor of love! Excited to be here, and look forward to learning some tips and tricks, and meeting some friendly, and fellow obsessed, fans. Good evening from California, -deniz
[Bionicle] "Garuda", Vortixx Mercenary Lady
Seltz posted a topic in LEGO Action Figureshttps://www.flickr.com/photos/114035403@N02/sets/72157647895428888/ Going by the alias Garuda, this young Vortixx woman is a pit fighter, dark hunter, mercenary, and recent deserter of the previously mentioned dark hunters. This lady is not one to mess with.
NZ scientist writes open letter to TLC - asks for 'Janus' head
LukeWarmTea posted a topic in General LEGO DiscussionAward winning NZ scientist Siouxsie Wiles wrote a short open letter to TLC on her website: http://sciblogs.co.n...letter-to-lego/ asking if TLC could again address the gender imbalance issues in their products, this time CMFs, and proposes an hitherto unthought of solution. It hit NZ current affairs mag http://www.listener....-are-the-women/ and I wonder if it will spread? My query is - what do you (as an AFOL or PFOL or whatever) think of the idea of two faced minifigs, with female on one side and male on the other? Personally I think if it is restricted to non-licensed themes and just appears in the CMF series then bring it on! But I would feel strange picking up a Batman that could turn into a Batwoman, and I'm not sure how it would work in classic themes like City - surely just a better representation of women (with better facial expressions) would suffice? Edited: A word.