Search the Community
Showing results for tags 'kenobi'.
Found 13 results
-
I started modifying the new set straight away after the press images were published, hashing out some ideas in Studio. I was I inspired long ago by Mr_Idler's amazingly detailed and well proportioned Delta-7 and I've always wanted a little Jedi Starfighter on my shelf, this set presented the perfect opportunity. At first I added a lot of wedge plates to create complicated but fragile slopes around the cockpit, but after getting hold of the original set inventory and recreating it in Studio I managed to rebuild the ship with a lowered cockpit without using any extra pieces at all. Here is the complete mod along with an LED Kamino Landing Pad that I threw together, instructions are on Rebrickable. I've lowered the cockpit area by 2 plates and added a layer to the nose which is now slightly more substantial looking and helps the cockit blend better into the ship. I've made some minor changes to the wings, R4 and the Republic crest are closer to the centre and I also moved the black inverted slopes to the edges of the wings in place of landing gear. The nose of the ship now sits a whole 3 plates lower when landed and the top of the cockpit is 5 plates lower. Rather than towering over the minifigures the ship looks much closer to scale. I've also rearranged the notched-wedge pieces from the tail to create the point over the cockpit canopy, which can't be hinged open but can still be easily removed. The landing pad in the photo above is buildable but the circle shape is slightly illegal, putting the wedge plates under stress, and so the build is hard to pick up once assembled. It is however cheap, compact and compatible with the cheap USB LED kits on eBay consisting of a string of six 1x4 plates. The landing pad instructions and Studio model (use this for parts list) are in a seperate zip file on my 75333 mod Rebrickable page. And finally a few of the oringinal renders. Thanks and I hope you like the mod!
- 28 replies
-
- obi-wan
- attack of the clones
-
(and 3 more)
Tagged with:
-
Old Ben Kenobi's Hut, Tatooine 0 BBY Speeder from Brickvault Old Ben Kenobi's Hut, Tatooine 0 BBY by Nicholas Goodman, on Flickr Old Ben Kenobi's Hut, Tatooine 0 BBY by Nicholas Goodman, on Flickr Old Ben Kenobi's Hut, Tatooine 0 BBY by Nicholas Goodman, on Flickr
-
"This is where the fun begins!" My latest ship from the Prequel Trilogy has arrived, and it surely was a lot of fun to make: here's Obi Wan's Eta-2 Actis Interceptor from Episode III - Revenge of the Sith and The Clone Wars. This small unit consists of 281 pieces (stand included), and has one major feature: true Minifig scale! There's a handful of beautiful MOCs of this ship out there already, but most of them are based on the huge cockpit piece from the playsets, so they're drastically oversized. So here I am with a, dare I say, more accurately scaled version. It does come with a drawback, you guessed it: you can't put a fig inside. A bit ironic I know, but I chose to go for a brick-built cockpit in order to get as close to the original design as I could, prioritizing accuracy over playability, as usual. The wings were pretty challenging given the ridiculously small scale, and my goal was to have them as thin as possible without compromising the SNOT look. I'm quite happy with the result and I think this makes a nice little display piece. It's also very swooshable despite the intricate wing design. I'm usually not a fan of stickers, but I thought this one deserved some sweet markings. I used the sticker sheet from the playset - it is included in the parts list. The color scheme can be changed to red with only a few part swaps (see last page in the instructions). ► Instructions for the Eta-2 Actis Interceptor are available at Rebrickable. More pictures on my Flickr page.
-
This is my very first MOC\Diorama Star Wars themed. I've made this as entry for a contest (Lego First Order channel on YT). I hope you like it, feel free to leave a comment. Many thanks for your attention.
-
Hello There! welcome to another purist Fig entry! Sith inquisitor Zan Helios Although a devastating force on the battlefield – Manipulating the dark side of the force to brutalize enemies Zan Helios preferred more nefarious means to defeat his adversary’s using subterfuge and cunning to undermine and expose his targets before swooping in for kill or capture. Jedi Knight – Correl Azur A Jedi from Duro – a fine pilot with strong leadership skills. Killed in battle on Felucia by General Greivous during the Clone Wars. His light saber became a fine addition to the general’s collection. General Kenobi Obi-Wan Kenobi served on the Jedi High Council during the final years of the Republic Era. Kenobi served in the Grand Army of the Republic during the Clone Wars. Battling against the Separatist Droid Army. Asajj Ventris Asajj Ventress was born on Dathomir, living an extremely difficult life with many different phases, she was a slave, a Jedi Padawan, Sith Assassin, a Nightsister and even a bounty hunter. Ultimately her fatal sacrifice at the hands of Count Dooku redeemed her and saved her lover Quinlan Vos from the darkside. Aayla Secura Aayla Secura -was a Rutian Twi'lek female – Originally a padawan to Jedi Master Quinlan Vos. She became a Jedi General in the republic army, commanding the clone troopers of the 327th Star Corps. She served loyally to the Republic until her demise at the hands of Commander “Bly” during the execution of Order 66. Seen here with her trusty Saber and a Jedi Holocron.
-
*Your entry has earned 20 XP* Some crazy old wizard in the sand
-
[MOC] [Render] Death Star Battle: Ben Kenobi vs. Darth Vader
Mon3yMon3y2020 posted a topic in LEGO Star Wars
For May the Fourth I made a small Ben Kenobi vs. Darth Vader moc. Death Star Battle: Ben Kenobi vs. Darth Vader by Money Money 2020, on Flickr -
This is a silent work in progress teaser for a series of shorts exploring different eras in Star Wars, I would truly appreciate any suggestions! Thank you!
-
This is my rendition of the Geonosian Arena from STAR WARS Attack Of The Clones. This has always been one of LEGO's most glaring omissions from the Star Wars line, hence why I decided to test out this MOC. OK, it's not excessively massive or complicated, but I just think it makes a neat little playset. Comment your opinions. Also don't forget to check out my LEGO IDEAS page for more information on this, and please support! :) from there you can read all about the design plan, the history, and also see any other photos of the MOC. https://ideas.lego.com/projects/158217
- 13 replies
-
- attack of the clones
- attack
- (and 29 more)
-
We are running the Star Wars Olympics now at our german forum Imperium der Steine, this is my entry to the first round. The task was to create a scene on 32x32 studs to show a sorrounding for one of the promotional figures. I have choosen the first scene of Episode I with the TC-14 figure. The original picture was without the figure, so that the jury had to guess it, but I am showing you the final take, to make you see the full scene. Greets Disco
-
Hey SteamWars-friends This is my interpretation of how the iconic Starfighter of Obi Wan might have looked in the Victorian Ages. Entry for the SteamWars-Madness on FBTB in the semifinals against Markus. And in addition i build a fitting HyperSteam-Ring for faster travelling through the SteamWars-Univsers: More photos can be be found here. All my SteamWars build will also be displayed in Skaerbaek. Probably the only chance to see them in "real". Good luck to Markus and thanks for stopping by. Best regards Jonas
-
LEGO JANGO FETT UNCHAINED: a Trailer Parody
the last chronicler posted a topic in Brick Flicks & Comics
In LEGO JANGO FETT UNCHAINED Jango Fett returns for revenge as a recapitated Bounty Hunter. Based on, without affiliation, Quentin Tarantino's Django Unchained. Thanks for watching, please subscribe and such.- 7 replies
-
- django unchained
- star
- (and 7 more)