Search the Community
Showing results for tags 'burton'.
Found 4 results
Hi, first post about doing a mod, but I felt pretty passionate about this one. Having grown up with the "original" Batman films, I loved the UCS Batmobile, and while I also love the lego Batwing, the elongated cockpit really struck me as a bit NQR. I tried various mods on mecabricks, and while the most accurate "shrinkage" (based on the original studio model) of the length of the cockpit would require the removable of (two) of the sections of 1/4 clear wall elements, this would require a full blown redesign of the seat and cockpit to fit it all in the remaining one. I also tried utilizing the new UCS A-wing canopy, but it's width isn't the 8 studs required (6 only), and again, a full redesign would be needed (which is a shame as it is a more accurate shape compared to this sets design) So finally, I settled on removing 2x BOW 1/4 4X4X1 which effectively shortened the length by about 2-3 studs (along with removal of other parts that were between the two cockpit sections). This allowed me to move the front of the canopy backwards 1 stud (more screen accurate) and also move the back "shell" (WALL ELEMENT CONE 3X6X6) forwards - again more screen accurate. To complete the look, I'm planning on printing some back vinyl to make the rear section of the canopy a sloping black area (rather than clear all the way back then a vertical black where the shell starts). The other major change I made was to remove some of the dark grey "detailing" to remain more screen accurate - especially the spoilers. I narrowed them by a stud to take advantage of the void below them created by removing the two LDG 2x6 bricks, which then allowed them to sit much more flush when down (with some detailing underneath 1 stud lower than the rest of the wing area) Instead of writing more, maybe I'll just show what I'm talking about, as it will hopefully make more sense that way. Happy with the overall result. Original model: Original studio model:
As most of you have probably guessed by my recent creations I am a big fan of Batmobiles. I love recreating them in Lego and have so far done the Arkham Asylum one and the Batman v Superman one. When most people hear the word "Batmobile" however these two aren't likely to be the first thing that comes to mind instead most will instantly think of the 1989 Batmobile from the Tim Burton movies. Initially I wasn't sure about recreating this Batmobile in Lego as it has been done so many times before however when I came up with a rough built I believed that mine would be different enough to stand out from the crowd and so I continued building until I was satisfied. The result can be seen in these pictures below: Here you can see a good front/side shot from the Batmobile to give a good look at it. As in the movie this Batmobile is rather long (about 21 studs) while still being rather narrow (8 studs). The same view from a slightly higher angle. Here you can see the front of the Batmobile. As you can see I opted to use a totally different approach to recreate the "bomb" at the front, rather happy with how it turned out. A side shot to reveal all of the details including the exhausts. Now we move closer to the back. Overal I'm pretty pleased with how it turned out. A dead on shot from the rear to reveal the afterburner. Just a shot that I rather liked the look of so I thought why not share ;) Here we have a shot of Batman next to the Batmobile. As you can see it is still pretty small despite its long size... and there is another surprise... Yes, Batman can actually fit inside the Batmobile! Not sure if you can see him but he's in there alright, cowl and everything. Now with the canopy removed we can see Batman a lot more clearly, say cheese! And that was it my recreation of the 1989 Batmobile. I hope that you enjoyed my recreation of this iconic car, if you want to you can leave me some feedback as I would greatly appreciate it, thanks for looking!
sparkart posted a topic in LEGO LicensedA couple of years ago, there was an assemblage of the live-action movie Batmobiles that made appearances at Warner Brothers Studios and the San Diego Comic-Con. This is a LEGO mini-scale recreation of those gatherings: To the Batmobile! by SPARKART!, on Flickr. It's funny to me how playing with LEGO sometimes leads you down creative paths you don't intend; At first, I didn't set out to make all these Batmobiles at this scale. It started with my acquisition of the Mattel Hot Wheels Batman Live Batmobile die-cast toy; I thought it would be fun and easy to recreate it in LEGO. Not that fun, not that easy, ultimately a failure, but what I learned from that exercise led to the creation of the Batman Forever mini-scale model design. After designing the Batman Forever model, I thought it would be a shame not to attempt the Batmobile designed by Anton Furst from Tim Burton's Batman. I re-used ideas from my Chibi Batmobile to make a more realistically proportioned mini-scale model. I really wanted a Christopher Nolan Tumbler to go along with these models, so I reworked the Tumbler design I already had, made it a little bigger and more accurately shaped. It's still undersized compared to the others, but close enough for me for now. The Futura Batmobile from the 1966 TV show and movie came next, and I laughed out loud with the creation of the little figures of Adam West and Burt Ward in their colorful, distinctive costumes. Isn't it amazing how just the suggestion of a few pieces of colorful plastic make pictures in the mind? That's one of the things I love about LEGO, that almost impressionistic appeal of suggesting something with a few colors and shapes, then relying on the audience to "get it". I kinda dreaded making the Batman and Robin version of the Batmobile because I don't like the movie, and I have habit of watching the source material for reference and inspiration while working on the models. You know, the quiet parts of Batman and Robin I really enjoy - those interactions between Alfred, Bruce, Barbara, and Dick - it's just the cartoony, loud, obnoxious parts of Batman and Robin that I find less than good. After all the practice with the other Batmobiles, this last one was designed pretty quickly; It's also the least accurate detail-wise and very simplified...but it comes from the movie I like the least, so...there. I've got the Tumbler and Batman Forever versions 99% done in real brick, and the Furst Batmobile is 80% done. I'm working on collecting the elements for the others. So, the project is very much WIP. Please feel free to give opinions on this ongoing effort, what you like/hate, what could be improved, etc.
MaceWindu posted a topic in LEGO LicensedHey! I'd like to present you my new MOC, which is based on Burton movie "Batman". Let's see this scence! This scence in photos! Thanks for watching!