Search the Community
Showing results for tags 'arquitens'.
Found 7 results
-
Started working on TapirTech's Arquitens cruiser. Will share occasional build updates for those interested. It's really a stunning model, and instructions can be purchased via the BrickCollective. Bricklink cost was ~$600 USD.
-
NEW Models will appear in replies later in this thread Models in this thread: RAZOR CREST RIOT MAR'S STARFIGHTER NEW REPUBLIC PRISON SHIP OUTLAND TIE FIGHTER IMPERIAL DROPSHIP JUGGERNAUGHT TREXLER MARAUDER COBB VANTH'S SPEEDER 546-CLASS CRUISER (ARQUITENS) RAZOR CREST Hello everybody I thought I would take a short break from building stuff from the animated series and build something “real”. Also what better way to celebrate the launch of the first live action Star Wars TV series than by building something out of LEGO?! Unfortunately being in the UK I might have to wait to actually watch it. ☹ Anyway I present my MINI version of the Mando’s starship ‘The Razor Crest’. And I must say I am really pleased with how this little model turned out. I am especially pleased with how the engines have turned out. At first I was not sure how to attach them and keep them at the right level but in the end I settled on the minifigure neck brackets. The engines themselves are built around a 1x1 brick with studs on the sides and the two ends of the engines are connected with a 4L Bar. I also think those grey ingot pieces give the shape perfectly. The ship also goes from 1 stud wide to 2 and back again so I could use those new triangle tiles for the rear ramp section. I have also made the usual ‘Planets’ style display with the new Mandalorian minifigure. I could go on but I will let the model speak for itself. Let me know what you think. Jon PS. Is it just me or does this ship remind anyone else of the ‘Serenity’ from Firefly? -
After a looong time, I finally finished it! This is the Thunderwasp (from Thrawn. Apologies if it does not look like it) which measures about 5/6 the length of the SSD Executor. Size comparison The bridge The underside And finally the simple interior.( Side panels openable but LDD glitched) Pls let me know if any improvements can be made!
-
[MOC] MINIs from Clone Wars - 10 models incl. NEW Turtle Tanker from Brothers arc
obijon posted a topic in LEGO Star Wars
New models will appear in the replies to this thread so keep an eye out! Models in this thread: 1. TWILIGHT 2. TRIDENT 3. BTL-B Y WING STARFIGHTER 4. HYENA DROID BOMBER 5. ARQUITENS-CLASS LIGHT CRUISER 6. CK-6 SWOOP "FREECO BIKE" 7. T-6 JEDI SHUTTLE 8. H-2 EXECUTIVE SHUTTLE 9. RX-200 ASSAULT "STUN" TANK 10. TURTLE TANKER (NEW) Hello again everyone After re-watching some of this prior to watching the new series I decided to go back and update some of my old Clone Wars models from a while back which were originally posted on the From Bricks to Bothans (FBTB) board. As I said these are not new models but have been updated for new parts which were not around when these were first built. The original versions of these were built way before the Planets Series so I have also had to buy the figures. The old versions can be found here (with some very bad and grainy photography!): http://www.brickshelf.com/cgi-bin/gallery.cgi?f=140779 TWILIGHT First up we have the Twilight - The Twilight was a Corellian G9 Rigger-class light freighter owned and operated by the Jedi Knight Anakin Skywalker during the Clone Wars. Skywalker and his Padawan, Ahsoka Tano, used the ship to escape from a battle on Teth. The original version was grey and sand blue but I decided to ditch the sand blue tints. I also updated the top cannon as the 1x1 brackets were not available when this was first built – just the neck bracket piece. I also wish they would bring the old fingered hinge plates back as I still have old grey ones for the bottom wing as they are the only piece that work so it can fold up properly. These are now rare but are very useful for mini builds as you do not have to add an extra layer of plates for imperial shuttle/Skyhopper (hint) wings for example. It shows my age that luckily I have a few of these lying around! TRIDENT Next up the Trident - the Trident-class assault ship, also known as the Trident assault ship, was a model of aquatic gunship manufactured by the Colicoid Creation Nest. They were used by the Confederacy of Independent Systems during the Clone Wars. This one is so old the cheese slopes were not available when it was first built so I have used the cheese slopes to update the head to give it a more rounded appearance – previously this had a jumper plate and a tile where the cheese slopes are. I have also updated the “limbs” with the 1 x2 plates with handles and clips, replacing the old finger hinge plates and also added the tooth pieces and added the round tile for the cockpit. Those cone pieces are still not both available in normal red though so dark red it has to be! Meh. BTL-B Y-WING STARFIGHTER Thirdly we have the Republic version of the Y-Wing Starfighter. The BTL-B Y-wing starfighter was an assault starfighter/bomber that flew combat missions for the Galactic Republic during the Clone Wars. This did not have a major overall – mainly new white pieces as the old ones had yellowed. I have added some of those curved 1 x2 slopes which weren’t around and a couple of the round plate with a bar which are very useful for cannons on minis! The shape of the nose has been built using the horizontal hinge plates instead of wedges so that is only 3 studs wide. HYENA DROID BOMBER Lastly, for this post, the Hyena Droid Bomber - the vulture droids big brother. These were droid starfighters manufactured by Baktoid Armor Workshop. They were designed for heavy ordnance bombing runs. Based on vulture droid designs, Hyena bombers had wider and sturdier hulls with huge wings to gain stability during flight. This one had the most drastic rebuild as I rebuilt the centre section completely. Instead of the 1x2 slopes with grilles I have used the new 1x2 curved slopes for the heads both on top and underneath. I also made the centre section a stud wider. Let me know what you think. More soon. Jon -
Hello there! I finally completed my re-modeling of the Arquitens Class Cruiser, I found on rebrickable (made by Shockjoke). Arquitens Class Light Cruiser Imperial 1 by Adrian Millhoff, auf Flickr I also want to make instructions for this, but this take a lot of time. Let me know, what you think, I appreciate feedback!
-
[INSTRUCTIONS] Arquitens-class Command Cruiser (MIDI Scale)
Kristof posted a topic in LEGO Star Wars
Several months ago @Brick-Wombat (Philip) completed my Venator Star Destroyer and decided to build a few more scaled ships to accompany it. When I saw his pictures, I knew the fleet deserves to be made into instructions. I reached out to Philip and we decided to first publish the Arquitens. After some back and forth design collab, aiming for increased sturdiness and better buildability of the model, I think the result is quite pleasing :) Obviously, the model is very small and simple and most of you would be likely able to build it just by looking at the picture, but I took it as a chance to try out some new features in Stud.io and hopefully get better in making some more substantial models in near future. You can check out the free instructions here! All feedback is appreciated! -
My absence from posting new topics is because of this beast of a moc. Near finished but still lacking an exterior for the rear. imperial light cruiser by Darth Hammy, on Flickr Size comparison with two 75055s imperial light cruiser by Darth Hammy, on Flickr Pls stay tuned for the official launch!
