Search the Community
Showing results for tags '60071'.
Found 2 results
-
In this thread you will find my own Classic Space space vessels, exo-bases and ground vehicles. Cosmic Explorer Built in 2012-13 for the Classic Space Supreme Commander, Benny the 1980-something space guy. It came equipped with a pocket for Unikitty during the Battle for Octan Tower. After the battle, this pocket was removed. (Unikitty turned down Benny's offer for a commission to Classic Space command, and has set out as a director actor in Movies & TV. See her latest film, "Johnny Thunder & the Temple of Gloom" for more info.) The area was replaced with a canopy for the crew to see outside from their stations near the Imagination Reactor, while the sensor array was replaced by a four-barrel repeating laser turret. This ship in it's original form (plus it's pilot Benny and his freinds) are featured in The LEGO Movie. Here you can see the inside of the vessel. Their are three seats up front in the main cockpit, and four more seats in the rear compartment. You can also see the rear turret tuned and elevated. It's design was inspired by fighter and bomber airplanes of Earth history. The ship's stats: Ship Name: Cosmic Explorer Model: LL929 “Voyager” class Command Cruiser Manufacturer: Classic Space Shipyards Engines: 3 Mega Imagination Reactors Max Speed: 5,100 MPH Weapons: 4 forward-fixed laser hi-pulse guns & 4 turret-based laser hi-pulse guns Max Hyper Speed: 80% speed of light LDD file for Benny's ssS: http://www.moc-pages...1452610235m.lxf Deep Space Fighters These ships are deep space fighters of the Galaxy-class. Each seat one figure and have enhanced hyper-drive making it nearly as fast as LL-929. (Benny's spaceship) This ship was designed to be a heavily-armed fighter, and features an enclosed cockpit allowing for long distance travel such as from system to system if in an emergency. Here is the cockpit, which can seat 1 pilot figure. The ships' stats are identical for both vessels: Owner: Classic Space Command Model: “Galaxy” class deep space fighter Manufacturer: Classic Space Shipyards Engines: 2 Imagination Reactors Max Speed: 3,100 MPH Weapons: 4 forward-fixed laser hi-pulse guns Max Hyper Speed: 50% speed of light LDD file for the fighter: http://www.mocpages....1415380096m.lxf Benny's Classic Space automobile This car was originally built by Benny to be used to shuttle himself to his work at Classic Space Command HQ and secret master builder meetings, and eventually to his SPACESHIP(!)'s hanger after the end of Octan Corporation hostilities. The ship was not featured in the film made about those events, but nonetheless was seen in the studio parking lot as Benny drove it to play himself in the movie. It currently is stationed on the planet Zonia, where Benny (along with all the other Classic Spacemen) lives. The inside of the car features two seats, opening doors, and steering wheel, among other devices / abilities. The rear of the car features the Classic space logo, identity plates, and double taillights. Statistics for the car: Owner: Benny the 1980-something space guy Model: “Meteor” class vehicle Year built: 1978 Manufacturer: Classic Space Motors Power-plant: V6 Imagination-fueled engine Max Speed: 80 MPH Classic Space security forces' Exo-Terrain Vhicle (ETV) This model was heavily inspired by set 75916: Dilophosaurus Ambush from the Jurassic World sets. I have turned it into a Classic Space vehicle by subtracting most of the features and adding the CS logo to this piece on the hood: http://www.bricklink...sp?P=30363pb021 and a space seat for the driver. The rear of the model features a removable spare tire. I plan on getting two of these jeeps for the space base. Statistics for the jeep: Owner: Classic Space Command Model: “Exo -Terrain Vehicle (ETV) class vehicle Year built: 1988 Manufacturer: Classic Space Motors Power-plant: V8 Imagination-fueled engine Max Speed: 95 MPH LDD file for the jeep: http://www.mocpages....1444615201m.lxf Classic Space ground command / flight control center I was originally inspired by the 2010 CITY set number 3182 (Airport) to make this improved control tower for my Classic Space base MOC. It is supposed to feature Classic Space printing on the blue 4 x 2 slopes, like this: http://www.bricklink...sp?P=30363pb021 The front of the building also features a Classic Space statue, which can either use a Regular white astronaut torso, or the statue torso from Space Police III line. Here you can see the inside of the model, with the second floor and roof being removable from the first floor. On the ground floor is Command and Control, also known as C&C. This is where the ground forces are dispatched and fighter squadrons are launched. It is also where communications are tracked, recorded and, if necessary, relayed to other bases / space vessels / commanders. The second floor is where Benny the 1980-something space guy's office is. it features a desk with telephone and lamp, a bed for those long nights working on battle plans / spaceship designs, and a model space base for when he needs to get away from it all. (the back of the model has blank walls, no details , and as such is not shown) LDD file for the command center model: http://www.moc-pages...1453820529m.lxf Comments, questions, and complaints welcome!
-
This building is my most recent form of Benny's Spaceship Shop. It sells all things Space themed, with Benny making model rockets in the back and a large model space city in the front window. Benny also lives on the upper floor. I already have the car, and just need to make the building in real life. please note, some prints are missing from the model: The sloped 4x2 sign out front is actually this piece: http://alpha.bricklink.com/pages/clone/catalogitem.page?P=30363pb021#T=C&C=7 While the arch in the window display should feature this print: http://alpha.bricklink.com/pages/clone/catalogitem.page?P=4490pb02&idColor=7#T=C&C=7 Benny's upstairs living quarters include a stove, sink and bed while downstairs is the model space city and check out counter with model rocket. The 2x2 tile in front of the model rocket should be printed like this: http://alpha.bricklink.com/pages/clone/catalogitem.page?P=3068bpb0353#T=C&C=1 The rear of the building features a loading dock. I was inspired to build this model after seeing the dark red half-track / truck in set 60071, Hovercraft Arrest. The model looked easy to duplicate, but it proved difficult to create an exact copy. I then decided to take it in a another direction and create a generic American 1950's car, which eventually got turned into this version of Benny's Classic Space themed automobile. The model features a row of space-ship styled seats and "double" tail lights. (I used a trans-red grille to create a nice effect.) the white tile above the rear bumper is supposed to be Benny's license plate. The CS logo part on the trunk is the same one from the store sign above the door. LDD file for the car and building: http://www.mocpages.com/user_images/80135/1446486318m.lxf
