Search the Community
Showing results for tags '60033'.
Found 3 results
These are builds inspired by or taken from the first MMO made for Lego: LEGO Universe. This game had very few real world items in sets, but two things did come out: ...a astronaut for people who pre-ordered the game in 2010... ...and a rocket that was modular in the style of the game (Nose + Cockpit + Engine) and was released in a LEGO Club event to build your own rocket. (both pictures from Brick Link) The game lasted barely past it's first birthday (October 2010 was when it started), with the plug being pulled on February 1st 12:01 AM 2012. As a testament to the game I played and loved, I built some models that continue the story past 2012 and into 2015 and beyond. Here are those builds: The Neo-Nexus Force, pilots, droids, and officers. The NIFT-E robot was designed in 2015 to compliment the thousands of Sentry (set 4416) series robots produced in 2006 by the X-POD corporation for the original Nexus Force founders. Thirty-four of these newer robots were produced in 2018 as a test batch, called the Nexus Iron Friendly Teammate - Engineer class (NIFT-E) for use as spaceship ground-crew and heavy engineering duties, including fueling and heavy duty maintenance, computer updating, and guiding ships into landing zones. They are used alongside human counterparts who work on the harder to reach areas of a ship's engine, and on life support systems. Each human master mechanic (of which every base has at least two or three of them, plus several apprentices) is assigned an NIFT-E counterpart, in which they are equal partners working towards the same goal: keeping the ships flying, the base humming with life, and repair bay as empty as possible in case of emergencies. I copied this back in 2012 from a desktop download from the old LEGO Universe game. It was carefully cut out and switched to gray scale to save ink. It is the logo of the Nexus Force. Due to the Nexus Force logo not being found anywhere but a expensive mini-figure torso from a limited edition polybag, I have decided to change the logo to something different. This new logo is seen in the 2014 CITY Arctic sets. I figure this is my in-universe explanation of the logo change: The Nexus force landed on an ice world named DY-17, (this was soon to be renamed Ice Station Destiny) in a bit of desperation, as the Maelstrom had damaged their escape cruiser, the Bright Hope, to the point of near hyper-drive core failure. The ships sensors located no technology on the surface, and not many life forms, but a lot of geothermal activity in the form of large heat/steam vents from the core to the surface, which could be used for emergency power. The ship landed, and soon the base camp for the crew of the Bright Hope was set up. It was then discovered the planet had many mineral deposits that happen to be compatible with the metal in the Hyper-drive cooling system. So, the minerals began to be mined, and pretty soon the crew had a good operation going that was almost self-sufficient and very eco-friendly. A vote was taken, and the crew chose to stay on the ice world they re-named Ice Station Destiny, as the planet had supplied all of their wants and needs. The logo was repainted to show the original Nexus logo as a distant star, signifying the journey taken by the Bright Hope to their new home world, which was symbolized by the ice-covered world on the logo. The Bright Hope and crew were eventually discovered two years after their landing on Ice Station Destiny by the Norstas of the nearby world of Beta Polaris. Bob formed a friendship with this like-minded race, which eventually became an Alliance between the two forces, and the rest is history. This moon base-like space base model was inspired by set 60036 (Arctic Base Camp), with light-poles from set 60062 (Arctic Icebreaker) and a sensor array from from set 60111. (Fire Utility Truck) The base consists of six separate, interchangeable, modular sections, all of which have opening roof / wall sections for ease of access. The base consists of six separate, interchangeable, modular sections. These include: computer command center, hallway turn, laboratory, hallway with control tower, straight hallway with landing pad, and finally the break room. Each section has opening roof hatches to get at the inside details. The break room is mostly taken from set 60036, with a sensor array from set 60111. (Fire Utility Truck) These computers analyze rock samples looking for fuel traces to be mined. This module leads outside to the base's elevated landing pad. This tower makes landing large spacecraft easier, and helps keep an eye out for unwanted guests.It sits on top of the previous module This hallway is empty for now, but will be filled later. This corner hall module also leads outside via a back door. (not visible here) The brain of the base: the computer control room. SPACE VEHICLES This ship was originally set 70816, Benny's spaceship (x3), with the Unkiitty seat and radar dish removed in favor of a skylight and laser gun turret instead. The sliding wings were redesigned to be stationary and thus provide space under the turret for commander Bob. The ship also has separate passageways for crew to walk so they don't have to go outside to go to Bob, engineering, or the bridge. More recently, I combined the ship with a more elongated nose taken from the 2015 DC Comics set 76028 (Darksied Invasion). I was inspired to build this model by this cool ship by Oran Cruzen as seen here. The ship has three areas for up to eight crew to be placed, with passageways for the figures to "walk" from section to section. The rear of the ship has three engines and a rotating, elevating laser turret above. This rocket was originally poly-bag number 55001 from the failed 2010 MMO Lego Universe. Just like in the game, it can split into three modular parts connected by Technic axles. These sections are the following: -Nose-Cone -Cockpit -Engine The rockets can be dissembled into the three component sections and are interchangeable with each other, and with about 15+ other rockets available in LDD form from the Lego Universe Wiki. Also, the completed rockets can seat 1 mini-figure each. This small and nimble fighter was designed after looking at a Classic Space model I found on my hard-drive. (I think it was inspired by a model my brother bought off Brick-Link a couple years back.) Anyway, I then tore the model apart and have added four guns, larger wings, and the larger air intakes from my Nexus tower rocket. The ship features an enlarged cockpit with controls and seating for one figure. The rear of the model features one tail-fin and two engines exhaust ports. LAND VEHICLES This small orange automobile was originally designed as a Mad Max-like vehicle by builder Hachiroku as seen here until I turned back the clock on it into a regular, non-apocalypse version. I then decided it would work well for Bob from the Nexus Force, formerly of the LEGO Universe MMO from 2010 - 2011. (R.I.P.) I added taillights and a license plate to the rear of the car. Their is only room for one mini-figure to be seated, but the space behind the driver's seat can hold some small cargo, such as a 2 x 2 x 2 (with tile lid) crate. This model is a slightly modified version of set 60033, Arctic Ice Crawler that I call the Mobile Ice Driller . Whereas the original set has a crane hook, this one has a much more useful drill bit. The drill is used for mining energy crystals embedded deep within the ice of the frozen world on which the Neo Nexus Force is stationed. This is a very slightly modified version of set 60035: Arctic Outpost. All I really did to this one was add the symbol to the front fender. The inside of the mobile outpost is a lab, complete with Bunsen burner and microscope with crystal sample. It seems the computer hanging from the ceiling bar is off right now, as the scientist is out collecting more samples that were dug out with the Mobile Ice Drill. The rear of the model is pretty sparse in details, and as such, their isn't much to say about it. The snow speeder you see here is a simple vehicle to aid in fetching luggage and equipment across the base. It is armed with a flare gun and a radio. These come in mighty handy when the sun sets and temperatures plummet to well below minus 125 Fahrenheit! This is a heavily modified version of 2018 Star Wars set 75217 (Imperial Conveyex Transport) mashed up into an 8-wide version of my 1950's Aerotrain model. The model also features inside details and Jacobs bogies besides the lift away side panels of 75217 and removable cab roof. The roof of the engineer's cab comes off to place a figure at the controls. Each of the four cars can hold four seats each behind the two fold-up side walls. These are the four passenger cars, which are linked together in pairs of two by Jacobs bogies. They can have more two-car sets dropped in or out, but the rear-most car set is the minimum. (as the last car carriers the four tail markers) MICRO SCALE This space station (named Odyssey II) orbits the ice world of Beta Polaris, pointed at the direction of the trans-dimensional rip in space-time that leads to Lego Universe, ready to report any threat that may emerge from the space between spaces. Odyssey II is both an advanced weapons research platform and a forum for great minds and leaders from throughout the universe.The station is the headquarters for the Neo Nexus Force, (in cooperation with the Norsta race, of course) and the home of Nexus - Polaris University. This school focuses on the meaning of time and space itself, plus performing experiments on hyper-space streamlining, artificial gravity production, theoretical physics, and sports. (Let's go Nexo-nauts!) Their are meeting rooms on one of the half of the two arms of the station, which provides the gravity for this section like a centrifuge. As such, this section is laid out so that the "ground" is towards the ends of the arms, with the center having lower gravity and the non-public front and back of the station have none and you can float weightless in. The other one of the arms features a large research facility, with many libraries and even a small university focused on the study of space, time and the many mysteries therein. The station also has "the wheel". This module provides living quarters for all the university staff, visitors, and station crew, and gravity is provided by the "ground" being the outer wall of the arms. The engines on this station allow it to move if need be, though this has never happened on a large scale beyond course correction and maintaining balance in it's orbit of Beta Polaris. The solar panels on the station are actually detectors of chaos energy, which would mean the breach between Universes is open once more and the evil of the Maelstrom is coming through. This would mean the station would be evacuated of civilian personnel and the military forces bolstered, ready to attack the swirling mass of darkness. Here we see one of the Neo-Nexus Force ships (the cruiser Bright Hope) docked on on of the four "gravity locks". These allow for the ship to sync up with the station and crew / passengers to disembark the ship. The Bridge Hope in miniature scale. (This was designed by my brother to be a counterpart to the Odyssey II space station. It is based off my mini-figure scale ship of the same name: Bright Hope) (In reality the space station model was inspired by this model by DcotorSpock888: https://www.flickr.com/photos/dr_spock_888/20558633496/in/dateposted/ plus the Babylon 5 and Star Trek TV series', the Star Wars universe, and the old LEGO Universe massive multiplayer online game.) FINAL THOUGHTS Well, that's all I've built so far, but that's not the end of the story or the models. Scott Bourgeois from MOCpages has made some pretty awesome stuff related to the Neo Nexus Force, their first allies, the peaceful Norstas (from the planet Beta Polaris in orbit of the the North Star) and the common enemy, the Xantukans. (inspired by the snake cultists from Ninjago) Here is a link to his Neo Nexus Force page with related builds: http://www.mocpages....lder.php/189764 EDITED 9/27/16: added real pics of the Robots, bob's car and updated digital screen shots of the fighters. The real pics of the space ships should be here by Sunday 10/2/16. EDITED 9/30/16: Added more real life pictures, this time of the space fighter-ships and the entire base as it sits now. EDITED 1/29/17: added new spaceship pics, and photos of Bob's car. EDITED 6/24/17: Added updated real life and digital pictures... new base pics coming as soon as the postman delivers the necessary parts! EDITED 7/1/17: Added real life pictures for update 4.0. Enjoy! EDITED 1/18/19: Added real life pictures for update 5.0, including the revised space cruiser Bright Future and a anew car for Bob. (more to come soon!) EDITED 10/9/19: Added digital screenshots of the upcoming Astro-Train consist. Still need to take more recent real world pictures of updated and new models! Any thoughts / ideas / complaints would be appreciated!
BEAVeR posted a topic in LEGO TownEurobricks and Rebrickable were challenged by LEGO to make alternate models for current year city sets. The builds had to only use the pieces in available in the official LEGO model, be made in LDD, digitized, tested in real brick and be a model a 7-10 year old could build!! I received set 60033 "Arctic Ice Crawler". It's a cute, nostalgia-inducing, but sadly smallish truck. With only 113 parts, some of them only connecting in one way, making alternate models out of this one really was a challenge. Luckily there were a good deal of brackets and functional elements available, so building nice playsets still was possible and fun. I hope you enjoy them and maybe rediscover how fun it is to build alternate models! Here are my two alternate models: "Bulldozer" [MOC] Bulldozer - 60033 alternate model by Bert.VR, on Flickr You can find the LDD model and building instructions there on Rebrickable. "Snowplow" [MOC] Snowplow - 60033 alternate model by Bert.VR, on Flickr [MOC] Snowplow - 60033 alternate model by Bert.VR, on Flickr LDD model and building instructions are available on Rebrickable as well I hope you like it, and stay creative with those lovely chunks of plastic!
REVIEW 60033: Arctic Ice Crawler Details: Series: City / Arctic Release year: 2014 Quantity of bricks: 108szt. Quantity of minifigures: 1 Quantity of bags with bricks: 2 bags (1 big + 1 small) + 2 tracks chains Bricklist: BrickLink Proce: ~15Euro Brickset BrickLink Summer 2014, over 30 degree heat outside, and you need to incorporate into the skin of the Arctic explorer, where it is also 30 degrees, but less than 0, and review the latest edition of the Lego City - Arctic. It's the reactivation of the same subject from the beginning of the millennium. There already appeared snow creepers, scooters and base. I wonder what was the "response from the market"? I'm trying to understand what was the spark for that decision, why Lego decided to return to the monotonous Arctic topic? 2014 Arctic gives us also a banch of snow vehicles and main base. What precisely incldes whole set ? 60032: Arctic Snowmobile 60033: Arctic Ice Crawler 60034: Arctic Helicrane 60035: Arctic Outpost 60036: Arctic Base Camp 60062: Arctic Icebreaker 60064: Arctic Supply Plane Yes, I remember about 30310 but I do not treat it as a part of whole set. I do not like polybags, at all. Sorry. :-/ Today's set is the second largest, but the least on my personal list of Arctic sets, which I would like to have in my collection. And how in the details presents 60033? Box: A small rectangle measuring approximately 20cm x 10cm. Leading blue colors are of course, a spin-off series Arctic City, white and blue as arctic white and orange and blue and shades of gray as the main colors of bricks. Tempted to say that the color has not been drastically altered from the sets of the 2000 ... FRONT & REAR TOP & BOTTOM RIGHT & LEFT Instruction and additionals: Small 40to page booklet, which describes the 36 steps of the submission of the model. On the last pages advertising the latest sets: Arctic and trains. inAnd ... big bag of parts (without number) and smaller, cha tracks and a template with labels. Minifigure(s): ... but the quality of minifigs, vehicles and proportions of the models stand on a much better level. Good example is the ice crawler's driver. The body has printed a lot of details: 2 x Arctic logos, zippers, pockets, fur and a transmitter? Complemented well as refined pants and blue hood. Bricks: Not much new stuff here, which is a strong argument. From my point of view, only these two things, listed below, I treat as "new". Black Tread Small (20 tread 'links') Light Bluish Gray Plate, Modified 2 x 4 with Pins Work in progress: Finished set: Last two pics made with 60032, which I bought for my daughter. BENEFITS: + track chains – had carried out a car with this element. You get the feeling that this is how the original works. Lightly tick. Cool! + nice and I think a good return to the topic that seemed to be so far now, as the Arctic land, + minifig, + set of colors, + set skillfully reflects, or at least gives you feeling, how work machines on research expeditions, + playability, + relatively not much stickers, but I think that the Arctic logo could be printed as it was done in 60032 set, WEAKNESSES: - price – in extreme cases, you can buy twice time bigger set from Great Vehicles series,, - distance between axes could be a little bit bigger..., - ... that's the main reason, IMO, why ice crawler looks less in comparison with a similar vehicle from 60036, Summary: Ice Crawler, strikingly reminds me of my first sets bought over 25 years ago. Subject simple model also, lack of additional interest in a set (only vehicle), a small box, over a hundred parts and as a result a lot of joy and fun that fits in your hand. Vehicle that is worth noting, was built based on existing blocks. Great for a small gift or a gift from a fan of Lego and of course must have in your collection !