Search the Community
Showing results for tags '2-6-2'.
Found 4 results
-
2-6-2 Prairie steam loco MOC - heavy Sava instructions MOD - finished in the real world 1/29/24
Murdoch17 posted a topic in LEGO Train Tech
Back when Bricklink allowed you to sell custom instructions, I bought some plans for a small 2-6-2 Prairie-type steam loco from @SavaTheAggie in January 2014. I devoured them, used the techniques shown to make me a better builder. Now, exactly ten years later, I've revisited the model: I built it in LDD, (with some stand-ins for BBB parts) then went to town making it into my style, and now it's done in the real world. You can see Sava's original MOC on his Flickr page here. I changed the boiler to be studs-up instead of SNOT, and removed the squeaky old tiny wheels from the model, and made space for XS Big Ben Bricks wheels instead. (this actually was easier than I thought it'd be!) I added a bigger headlight, and a different stack along with heavily revising the piston / side rod assembly. As for the tender, different wheels were added and a 'painted' box put on the sides. The engine is numbered 119 and lettered for BRS (Brick Railway Systems), my original LEGO railroad that I began when I was in late-stage elementary school nearly 20 years ago. (Man, how time flies!) I also gave it the original black-and-red paint scheme of my first train MOCs from the early 2010's, as a nod to my past. This loco was my third set of instructions I purchased from Sava back in the day, although I had never built this one until now. (I did build the 4-6-0 and Berkshire I bought in 2010 and 2012 respectively, but oddly not this one from 2014) The inside of the cab. Thoughts? (Updated with new 7 wide tender 1/29/24) -
Green 2-6-2 (Prairie) steam loco with matching passenger train
Murdoch17 posted a topic in LEGO Train Tech
This 2-6-2 Prairie type engine was inspired by the My Own Train series of 2001 and a boiler from set 79111 (Constitution Train Chase). The passenger coaches and baggage car were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The baggage car has two opening doors, two sliding panel-doors and an "exploding" back wall inspired by set 79111. (Constitution Train Chase). The whole train together. Here we can see the rear of the train with the back wall (and dynamite) still in place. (You may notice the baggage car is a modified version of the green Western jail car I already have built) The yellow 1 x 4 bricks used are actually supposed to be green printed bricks with this on them. The tender features a coal bunker, and water tank, plus a ladder at the rear for accesses to the passenger train. The cab features a firebox door (a 2 x 2 round tile) and two printed gauge tiles. The coaches were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The exploding baggage car was originally the Jail car from set 79111. (Constitution Train Chase) while gaining the styling of set 10015 (Passenger Wagon) and doors from 10194. (Emerald Night) This car has one play feature that is sure to blow you away: the back wall can be removed to get at the baggage compartment via the "dynamite" on the outside of the back wall. (actually, the roof top lever knocks the wall loose) Then your train robbers can make off with whatever valuable are inside! As usual, the LDD file for the whole train is seen here while the loco and tender by themselves are here. Comments, Questions, Complaints, & Suggestions are always welcome. This train is on my to-do list, but won't be built for a while... maybe this summer? -
Hello everyone, Years ago, I saw a 3D rendered image of a streamlined locomotive online. I built a model of it then, but I didn't do a very good job of modeling it. Complicating the matter is the fact that the locomotive seems to be fictional, so I only had one render of it to go on. After coming back from college I decided to see if I could do a better job of it. Here is the result: and here's the image I based it off of: Some details wound up being cartooned away. The fictional locomotive appears to be based in part on H45 024, a high-pressure variant of the DRG Class 45. Since there was only this one rendered image for reference, I had to extract out the proportions of the model by "reversing" the perspective of the image to figure out what the locomotive looks like from the side. The side view suggested an oddly short condensing tender; I may change that on a later revision. There are two things I enjoy a lot about this model. The first is the three linked flanged drivers, which prompts a lot of head-scratching when I point it out. The model does in fact drive through all switches and curves -- I'm using a variant of Ben's sprung wheel trick shown here. Essentially, the middle drivers are on sprung half-axles and retract inwards a little on curves. The second feature is the use of technic piston heads for buffers -- they're just the right size! It turns out that if you jam them over a 1x1 plate with horizontal clip they stick. Full gallery here. Thanks for looking -- let me know what you think.
-
Hey folks! Well, some years ago I designed a model of an LMS (London Midland and Scottish Railway) Ivatt Class 2MT 2-6-2T engine designed in LDD. So one week ago I changed the livery to the one that was really used and reduced bricks (it just has about 580 for that detailed model). Furthermore I tried to incorporate Power Functions. There is enough room for them, the PF Small motor will definitely fit, but I'll try it with the PF Large motor first. Here is the design from LDD: Here is a pic where you see the PF components: I have built some of the model in real bricks, I just don't have all the parts yet( at least in the right color), though I nearly finished one side: The trailing wheels all clear nicely in curves. I also designed a model of the BR 9F 'Evening Star' which could be operated with Power Functions or 9v in the tender, maybe I will try my hands on that one sometime: I hope you enjoyed it, I will update the thread when it's more finished.
