Search the Community
Showing results for tags '10015'.
Found 6 results
-
DISCLAIMER: This steam locomotive featured below was heavily inspired by pictures of @SavaTheAggie's 4-4-0 from 2007, visible here. I added a tender inspired by another Sava loco (his 4-6-0, also from 2007) as seen here. I also made the front bogie actually connect to the front of the loco. (before, in the original design it was totally free-floating) I also made a few structural / style tweaks here and there, to make it "my own". My dad is getting this loco for his 65th birthday, as I wanted to make him something he would find relatable to his own collection of 1990's / early 2000's 9v era trains, of which he has most of what was released. This engine is meant to go with a few copies of 10015 - Passenger Wagon, and a single 10014 - Caboose will accompany this engine. The loco isn't motorized however, but it can be by removing the tender's wheels and adding in a 9v motor instead. Sadly, when I gave it to him I forgot to get pictures of the whole train together... this older picture will have to do until I can get a proper one taken. Thoughts? -
Western 4-6-0 steam loco and passenger train (real-life) MOCs - 71044 inspired
Murdoch17 posted a topic in LEGO Train Tech
As seen here on EuroBricks, user @Carefree_Dude tried his hand at making the new Disney train have working pistons and getting rid of the hideous no-metal-axle wheels. I was very much impressed with the results, and took the pictures and reverse engineered them to have a similar 4-6-0 of my very own. (If the tender looks familiar, it hasn't changed at all from the last version.) However, as you may have noticed, the pistons are different, as they gave me a ton of trouble figuring them out, so I imported a design of my own previous use that I know works. The rear of the loco features a ladder to the tender-top, where the hatch to the water tank is found and also where the neatly stacked wood pile is located . These passenger cars were mostly inspired by set 10014 (Passenger wagon) but repainted red instead of green and with fancy part 30613 "Brick, Arch 3 x 6 x 5 Ornamented" on the end of the cars. I might be mistaken, but Flickr user The Shubes (Isn't he on Eurobricks too?) may have been the one to inspire these coaches with his own red versions of set 10014 as seen here. The end of my passenger train features this little four wheel caboose. It was designed after set 10015 (Caboose) with some features taken from set 7597 (Western Train Chase) This design is now finished in real life, after a record six days from designing on 10 / 20, ordering on 10 / 21, to being built on 10 / 26. That's really fast service by my standards! -
Green 2-6-2 (Prairie) steam loco with matching passenger train
Murdoch17 posted a topic in LEGO Train Tech
This 2-6-2 Prairie type engine was inspired by the My Own Train series of 2001 and a boiler from set 79111 (Constitution Train Chase). The passenger coaches and baggage car were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The baggage car has two opening doors, two sliding panel-doors and an "exploding" back wall inspired by set 79111. (Constitution Train Chase). The whole train together. Here we can see the rear of the train with the back wall (and dynamite) still in place. (You may notice the baggage car is a modified version of the green Western jail car I already have built) The yellow 1 x 4 bricks used are actually supposed to be green printed bricks with this on them. The tender features a coal bunker, and water tank, plus a ladder at the rear for accesses to the passenger train. The cab features a firebox door (a 2 x 2 round tile) and two printed gauge tiles. The coaches were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The exploding baggage car was originally the Jail car from set 79111. (Constitution Train Chase) while gaining the styling of set 10015 (Passenger Wagon) and doors from 10194. (Emerald Night) This car has one play feature that is sure to blow you away: the back wall can be removed to get at the baggage compartment via the "dynamite" on the outside of the back wall. (actually, the roof top lever knocks the wall loose) Then your train robbers can make off with whatever valuable are inside! As usual, the LDD file for the whole train is seen here while the loco and tender by themselves are here. Comments, Questions, Complaints, & Suggestions are always welcome. This train is on my to-do list, but won't be built for a while... maybe this summer? -
The trains I'm going to show you use a lot of unique models to make this train setup possible, including sets 10254, 60052, 79106, 79111, and 10015 for the Army train, and 7597, 10014, and 10015 for the passenger train. (This is both a single MOC and several MODs at the same time.) These trains are also 100% build-able in real life... I haven't got the green one built, but the red one is 98% finished! They are done, so you can see them below! US 1870's MILITARY TRAIN & 4-2-4 STEAM LOCO Let's start with the newest train: the 4-2-4 and the US Army train. This is a more realistic version of set 10254 (Winter Village holiday train) for all the train fans who don't like the engine. I added working pistons, and a more cohesive color scheme plus two more sets of wheels on the engine. This is a tank engine, and as such does not have a tender. The rotating Gatling gun you see here was taken from set 79111. (Constitution Train Chase) This horse car was originally a cattle car from set 60052, (2014 Cargo Train) but I've re-purposed it for my Army officer horses. These cannons are from set 79106 (Calvary Builder Set) and were placed on a generic flatcar. for transport by rail. This coach was inspired by set 10015 (Passenger Wagon), and features no interior. T The jail car you see was originally from set 79111. (Constitution Train Chase) while gaining the styling of set 10015. (Passenger Wagon) This car has one play feature that is sure to blow you away: the back wall can be removed to get at the jail cell via the "dynamite" on the outside of the back wall. When pushed back towards the other end of the car, the rear wall pops out and the bad guys can escape! Here is the whole military train all put together. US 1870's PASSENGER TRAIN & 4-6-0 STEAM LOCO Next up, the modified passenger train which I have shown before on these forums, but has received a bit of a face-lift. This engine was originally modeled after set 7597 (Western Train Chase) with some design inspiration from TF Twitch's "Humble Sapphire" 4-4-0. The engine also features a boiler copied from set 79111 (Constitution Train Chase) to keep it inline with the rest of my steam locomotives. The rear of the loco features a ladder to the tender-top. These passenger cars were mostly inspired by set 10014 (Passenger wagon) but repainted red instead of green and with fancy part 30613 "Brick, Arch 3 x 6 x 5 Ornamented" on the end of the cars. I might be mistaken, but Ben Shuber may have been the one to inspire these coaches with his own red versions of set 10014. The end of my passenger train features this little four wheel caboose. It was designed after set 10015 (Caboose) with some features taken from set 7597 (Western Train Chase) Here is the whole passenger train all put together. US 1870's FREIGHT TRAIN & 4-4-0 STEAM LOCO Since I turned the red 4-4-0 into a 4-6-0, the slot has been opened up for another "American"-type. Thus, I created Yellow 4-4-0 number 2, to go along with red 4-6-0 number 3 and green 4-2-4 number 1. The engine is supposed to feature four of this part on the tender and cab walls where the green bricks are located: http://www.bricklink...09pb011#T=C&C=3 This log car was also designed by my brother, and is quite ingenious for using set 60059 (Logging Truck) but on a train base. The logs are floating place, as they would be resting on the bottom of the car in real life. It was quite a pain to position them into place as seen here. The flat car is heavily inspired by the one in set 3225 (Classic Train), except this version features two bogies unlike the original set. This vintage water tanker is a modified set 2126 (Train Cars) design with four wheels on the two bogies instead of two wheels stuck to the frame. Set 7597 was the original model for this boxcar, which has been made so the doors can't open.... though you can remove the handle on the side of the car and it will open fine. This caboose was inspired by set 10014 (Caboose), but my version lacks the top part of the caboose, which is traditionally called a cupola. Here is the whole train together. US 1870's LEGOREDO MODULAR TRAIN DEPOT This old railroad station was inspired by set 7594 (Woody's Roundup!) which I have named the Fort Legoredo passenger depot after the famous set number 6761. (Fort Legoredo) This railroad station was built in 1874 after the original station structure (built 1867) burned to the ground in late 1873. It was confusingly named Fort Legoredo at that time by the railroad in an attempt to persuade potential settlers that this land was protected by the army, when in fact the Federal government was planning on closing down the actual Fort Legoredo. (this plan was eventually gone through with, as the Fort ceased operations when it burned to the ground in 1885 and was not rebuilt) The station has since stood for 140+ years with only slight modifications, such as adding computer control systems to the upper floor in 1980 to control the switches and monitor train traffic to the still-active silver mines. The station also serves as the oldest building in the city and is featured heavily in tourism advertisements for the city and it's historical reproduction of the original Fort Legoredo. (the US Army base, that is) The station is modular, as the roof and second floor come off and the two side platforms come apart by means of Technic pins. This lower floor features two waiting rooms with a ticket office in-between them. This office features stairs to the upper floor. The upper floor features a vintage safe that is used to hold silver dust / nuggets that is still payable for a train ticket. The metal is weighed on the scale (seen next to the safe) to ensure it is the correct type. (Read: not fake). The newspaper contains the daily precious metals prices, so that is is fairly measured and properly payed for. Eventually a special train comes though the station and the dust / nuggets are exchanged for proper paper currency, with the expensive metal being shipped back east to Denver to be made into coins and bars. The anachronistic modern computer system was added in 1980 to control the switches and monitor train traffic to the still-active silver mines. US 1870's MODULAR COLLAPSING TRAIN BRIDGE This bridge was inspired by Bad Cop's Pursuit (set 70802) and the short section of railroad bridge included with that set. When I first saw it, I thought it would make a great play feature for a train bridge that is actually usable by trains. Here is the result of all that working and reworking: 12 sections of PF / RC train track (It won't work with 9V, sorry!) with 1 section "failure point" consisting of 2 tracks pieces, plus 2 studs of space to separate the moving from non-moving items and allow the hinge to do it's job. The track leading up to the "failure point" as I call it, is raised ever so gently at an angle of (at most) 1 1/3 bricks high per 1 section of track. (The angle of ascent / descent depends on which part of track you are on, but for the most part it's consistent.) The design of the bridge is modular so that you can easily disassemble the bridge for transport. It disassembles into 2 lower ramp sections consisting of 4 tracks each and 2 flat sections placed onto plates with the 1 "failure point" module consisting of a hinged (on one end) track piece in the middle. The bridge when the track is safe to cross: the pins are inserted and it should be stable. Naturally, a very heavy engine will snap the Technic rods in half, breaking the bridge permanently. Thus you can only use this engine with Small engines like my 2-6-0 + it's consist, (AKA the Lone Ranger train) the My Own Train series engines, or something of comparable weight. This is how it works: Their are two hidden Technic rods under the track that should allow trains to pass by safely overhead. Pull the Technic connector and your bridge collapses. Lift the bridge up and move the rod back in to reset the bridge for the next adventure. US 1870's TRAIN STUFF - LDD FILES LDD file for the green 4-2-4 loco only: http://www.moc-pages...1471631241m.lxf LDD file for the green loco and it's train: http://www.moc-pages...1471631317m.lxf LDD file for the red 4-6-0 loco only: http://www.moc-pages...1473035459m.lxf LDD file for the yellow 4-4-0 loco only: http://www.moc-pages...1473035594m.lxf LDD file for the yellow loco and it's train: http://www.moc-pages...1473101156m.lxf LDD file for the modular train station: http://www.moc-pages.com/user_images/80135/1456867526m.lxf LDD file for the collapsing train bridge: http://www.moc-pages.com/user_images/80135/1472495977m.lxf EDIT 9/18/16 - Added real life pictures of the train station and digital pictures of the bridge. The LDD files were added for both as well. Comments, Questions, and complaints are always welcome! Thanks for looking!
-
Western railroad depot with steam train - 7594, 7597, 10015 MODs
Murdoch17 posted a topic in LEGO Train Tech
This old railroad station was inspired by set 7594 (Woody's Roundup!) which I have named Legoredo Junction passenger depot, (after the famous Fort Legoredo, set 6769 and the re-release set 6762) while the train is inspired by sets 7597 (Western Train Chase) and set 10015 (Passenger Wagon) I have the station and locomotive + passenger cars built. The bridge will not be built. 1870's modular passenger depot Here is the fictional background story for the station: This railroad station was built in 1874 after the original station structure (built 1867) burned to the ground in late 1873. It was confusingly named Fort Legoredo at that time by the railroad in an attempt to persuade potential settlers that this land was protected by the army, when in fact the Federal government was planning on closing down the actual Fort Legoredo. (this plan was eventually gone through with, as the Fort ceased operations when it burned to the ground in 1885 and was not rebuilt) The station has since stood for 140+ years with only slight modifications, such as adding computer control systems to the upper floor in 1980 to control the switches and monitor train traffic to the still-active silver mines. The station also serves as the oldest building in the city and is featured heavily in tourism advertisements for the city and it's historical reproduction of the original Fort Legoredo. (the US Army base, that is) The station is modular, as the roof and second floor come off and the two side platforms come apart by means of Technic pins. This lower floor features two waiting rooms with a ticket office in-between them. This office features stairs to the upper floor. The upper floor features a vintage safe that is used to hold silver dust / nuggets that is still payable for a train ticket. The metal is weighed on the scale (seen next to the safe) to ensure it is the correct type. (Read: not fake). The newspaper contains the daily precious metals prices, so that is is fairly measured and properly payed for. Eventually a special train comes though the station and the dust / nuggets are exchanged for proper paper currency, with the expensive metal being shipped back east to Denver to be made into coins and bars. The anachronistic modern computer system was added in 1980 to control the switches and monitor train traffic to the still-active silver mines. 1870's train bridge with collapsing function This bridge was inspired by Bad Cop's Pursuit (set 70802) and the short section of railroad bridge included with that set. When I first saw it, I thought it would make a great play feature for a train bridge that is actually usable by trains. Anyway, here is the result of all that working and reworking: 12 sections of PF / RC train track (It won't work with 9V, sorry!) with 1 section of old 4.5V straight track plus 2 studs of space to separate the moving from non-moving items and allow the hinge to do it's job. The design of the bridge is modular so that you can easily disassemble the bridge for transport. It disassembles into 2 lower ramp sections consisting of 4 tracks each, 2 upper ramp sections, and 1 "failure point" module consisting of a hinged (on one end) track piece. Here you can see the bridge when it's in the up position. This is how it works: Their is a hidden Technic rod under the track that should allow trains to pass by safely overhead. Pull the red Technic connector on the right side an your bridge collapses. Here is the bridge with the pins removed and track "broken". 1870's luggage cart Just a small US railroad luggage cart I whipped together in 5 minutes.... nothing special. I will be getting these with some other small projects, probably at the same time as my streetcars. LDD files and etc. Here is the LDD file for the station (version 4) by itself, if anyone wants it: http://www.moc-pages...1456867526m.lxf Here's the LDD file for the broken bridge: http://www.moc-pages...1456341678m.lxf EDIT: Here's my progress on the loco & it's train cars as of 2/22/16: Both sections are currently a Work In Progress: the coaches an 99% done, but the steamer needs parts for it's pistons to work right and few other minor details. EDIT 2/23/16: Since the last time I uploaded this, I added a roof to the waiting areas and removed some non-existent parts. The LDD file and pictures have been updated accordingly. EDIT 2/24/16: added breakable bridge pictures and it's LDD file. EDIT 2/25/16: Added updated station. It is now modular, and has two removable levels: roof and second floor. EDIT 2/27/16: Which one of these two pictures (below) do you think looks better, as I'm torn between the two. I'll add a poll so you can chose. EDIT 3/1/16: Since the l have ordered the model, and as such some substitutions have been made (such as the windows), and the upper floor has been furnished. EDIT 5/15/16: added luggage cart to the page. Just messing around with options in Google images: This photo was originally taken on the United States 100th Birthday, also known as July 4th, 1876 and shows the 4-4-0 (American) type "No. 1" pulling a passenger train into Legoredo Junction. This version of the photo is the original version, taken in 1876. A retouched and colorized version was released as a souvenir postcard in preparation for the 200th anniversary of the founding of the USA, and the 100th birthday of the engine. This version of the photo had been retouched sometime in the early 1970's to add some color into the originally Black and White photograph in preparation for the 200th anniversary of the founding of United States of America and the 100th birthday of the engine. If you vote, please state your choice! Also, please visit this thread for info about the steam train I made to go with the station: http://www.eurobrick...howtopic=122409 Comments, questions, and complaints are always welcome! -
Everyone remembers the 9V Train's sub-theme "My Own Train"... or if you don't and are wondering what I'm talking about look here on Bricklink for a list of all the sets in that theme: http://www.bricklink...ing=124.315.694 The passenger aspect of this sub-theme is covered by this set, #10015: Passenger Wagon. (seen in this stock Bricklink photo below) Also, I might suggest you look at -R8-'s 2011 Reviewer's Academy review of the set here on Eurobricks: http://www.eurobrick...showtopic=59018 Everyone loves a classic, and the set deserves the affection if gets. However, it really lacks variety if you have a whole train of these running around. I asked myself these questions: Where does the baggage / mail go? Where are the end tail lights? Why am I talking to myself? Thus, I built my own version, which I plan on getting in real life soon (if not next): I went ahead and added inter-car walkways, giving it less a 1870's feel and more a 1910's look, plus two sliding doors for the combination baggage / passenger car. A small rear platform for the observation car was added, as were 1/2 stud recessed doors for platform access. These coaches are also build-able in tan, dark purple, reddish brown, white, black, and red. They are to be pulled by engine #4613 around my layout: (EDIT: 7/22/14: Updated the photo of the engine to a more recent screenshot... now I just need to take a real life photo!) What do you think? Comments, questions, and complaints welcome!