Search the Community
Showing results for tags 'united kingdom'.
Found 8 results
-
Here is one of Thomas the Tank Engine's best friends, Bertie the bus, as seen in The Railway Series books and the original Thomas and Friends TV show. You can see LEGO Thomas and his fellow engines and some rolling stock over in my thread in the Train Tech sub-forum. Thomas and Bertie once had a a race, and they both want a rematch, but I don't think they ever will... do you? This model's front end was inspired by 2019 Harry Potter set 75957 (The Knight Bus) and the rear portion by the bus in the 2017 set 10259. (Winter Village Station) The side door opens, and Bertie seats one driver and two passengers (three figures overall). The rear of the friendly bus. You can see the read about the original book version of him here and the TV show here, both on the Thomas and Friends wiki. Any thoughts would be appreciated!
-
Cruela De Vil 1930s roadster - real world 40532 (Vintage Taxi) inspired MOD
Murdoch17 posted a topic in LEGO Licensed
This car is owned by Cruella De Vil of "101 Dalmatians" fame in the classic red and black paint-scheme of that animated film... and no, its doesn't fall-apart like in the sequel film, "Patch's London Adventure". (at least, not on purpose!) I built the model by heavily stretching set 40532 - Vintage Taxi by about seven studs. This allowed for me to add in some mechanical details, although it might be a bit too long now. I added a covered spare tire at the rear of the car, and blacked out the back windscreen to give the impression of a fabric convertible top. As an added bonus, the car still seats two figures with room in the trunk for luggage. The whole point of building this car is to give Cruela from the upcoming Disney CMF her iconic vehicle back and complete her "look". I plan on buying this figure as soon as it comes out on April 1st. Thoughts? -
This started out as a test in LDD as to whether I could build my BR 9F in orange and not use unavailable parts. (I obviously succeeded!) However, you may be asking, why Orange? And why change a model eight years after building it originally? Does this have something to do with your username, 'Murdoch17'? The answer to all these questions are intertwined: The model is based off the BR standard class 9F 2-10-0 steam engine Murdoch from Thomas and Friends (introduced in the last year of the "pure" model series, 2005), which was also the basis for my half my original Lego website username from 2007, and then everywhere else later on. But more on that later! I originally built the model in late 2013 based off this unfinished 9F Murdoch model by @ScotNick. It was uploaded on Brickshelf first, and later on Flickr after I uploaded my copy (LDD only, at first) in November 2013. When I had redesigned the engine to build it IRL, I realized orange had virtually been eliminated as a color choice at that time. Windows were (up until that summer when CITY Arctic dropped) only from the 2004 BNSF loco, and orange was VERY expensive as a color. It was impossible. I thus decided on "works gray" as the only option I could do it in... you can see the original February 2014 version above. ...and here it as of 2019. Orange's pallet of parts would increase in the intervening 8 years, culminating in 2022 with every orange part I needed being buyable! The rear of the tender with the number 17 on it. A view inside the cab. This brings us back to me and my username: Murdoch is the part you know, but where did "17" come from? Well, Murdoch also had a wooden railway model released in 2005 (my favorite, even though I was WELL out of the age range), and I didn't like that he was never assigned a number in the TV show. So, I randomly chose 17, had my dad printed me a sticker, and slapped it onto the wooden tender. Fast forward a few years to late 2007, when I was thinking of a username for the Lego website. I wanted something catchy, and something I could easily remember. (and something nobody else could take!) The wooden Murdoch was sitting on my desk, and caught my eye and I typed it in. Thus, my online moniker was born. Thoughts? EDITED 9/24/22: real world photos added!
-
LB&SC Railway 4-6-0 mixed traffic steam locomotive with four passenger coaches
Murdoch17 posted a topic in LEGO Train Tech
The engine seen below originally came as a generic British 2-6-0 from the Block Junction website, to which I added two extra leading wheels and a new paint scheme inspired by that found on London, Brighton, and South Coast Railway locomotives around the turn of the 20th century. But wait, you say, there were no 4-6-0's in that time period on that railway, or even ever painted in that scheme later on! I know that, consider this a experimental one-off that was a hushed-up trial in superheating. (or something similar they were trying back then) Anyway, a group of close friends and business leaders bought the one-off loco from a backlogged scrap dealer in the early 1930's and preserved it. (These people later became the LEGO Rail Transportation Society in the late 1940's, saving more and more rolling stock and locomotives before saving a to-be-torn-up branch line during the Beeching Cuts of the mid-1960's.) The engine was repainted to LBSC colors somewhere in that time, and re-allocated it's old number X1, designating it as a experimental engine. Over the years, the engine was restored to working order, and had it's troublesome super-heater removed entirely and replaced with a better one. It now runs as a mixed-traffic loco, puling tourist passenger and freight trains alike, just as it was designed to do in the late 1890's / early 1900's. The letters LBSC will go on the tender walls, while the engine will feature X1 on it's side. The block junction page I bought the original 2-6-0 from is seen here. Close-up view of the three passenger coaches, from which Annie and Clarabel (from The Railway Series / Thomas and Friends) contributed their designs to the look of. …and here is a close-up view of the guard's coach, which features a compartment for luggage and the guard himself. (That's a UK version of what we call the Conductor here in the States.) NOTES: Now, I know the coaches are a bit short in height by a single brick (or is the loco to tall?) but otherwise it looks odd if I change it to be taller / shorter. Any thoughts, comments, or suggestions? They are all welcome! -
2-10-0 "Austerity" class steam locomotive + UK freight train - real life finished MOC!
Murdoch17 posted a topic in LEGO Train Tech
The War Department "Austerity" 2-10-0 is a type of steam heavy freight locomotive that was introduced in WWII in 1943. It was designed by R.A. Riddles, the same man who latter went on to design the British Railways 9F 2-10-0 type. I've backdated my 1950's 9F type into this 1940's Austerity class by removing the side smoke deflectors and changing around some small features here and there. As most of this engine still existed as-built from my previous 9F build from 2014 (that itself was inspired by @ScotNick's model of Thomas and Friends' 9F-type engine Murdoch) or so, I just needed to get wheels, a tender draw-bar connector, pistons / side-rods, and the little bit of parts to convert it to a Austerity type. The tender has "BR" printed on it in 1 x 1 tiles, standing for British Railways, as this engine was placed into service with the newly nationalized rail network after service with the War Department during WWII (around early 1948). However, it still is carrying it's War-time grayscale color scheme at this point in the early 1950's, lending to it's nickname the "Gray Ghost". The cab of the engine, with firebox in the middle. In the real world, the Austerity 2-10-0 class engine was designed and built during the Second World War as an British export locomotive, with some going as far away as Greece, the Netherlands, or Syria, while a few stayed in the UK to be worked by the War Department, and later, British Railways. All but three of the ones from the UK (of which one was owned by the Longmoor Military Railway) survived mass scrapping in 1962 and were preserved, while a fourth was brought back from the Netherlands and also survives. (There are also a few derelict versions in Greece, while a museum in the Netherlands has an engine as well, albeit in much better condition than the Greek locos.) All credit for the BR plank wagon model seen in the picture above goes to @Pdaitabird, who designed them. See here for an awesome step-by-step tutorial by the original builder of the BR plank wagon. Original design by Flickr user Fireglo450 in 2013, revised by me in 2020. See here for the original inspirational model. Here we see the whole gravel train at an "on-it's-side" view for maximum viewing. This train is destined for the Gravel loading facility where it will be loaded with crushed stone for either rail ballast or concrete works projects elsewhere in the country. As usual, comments, questions, and complaints are always welcome! -
Haven’t seen any chatter about this on Eurobricks, but LEGO will have a space at Pride in London tomorrow (Saturday, June 6) where they’ll be providing Duplo bricks for kids to build with and minifigure parts so kids and their families can add figures of themselves as part of a minifig-scale pride parade that will be on display there! It’s great to see LEGO making a more visible effort to support the LGBTQ+ community, particularly considering how many of their employees (including designers with strong standing in both the company and the AFOL community, like Matthew Ashton and Marcos Bessa) are out and proud! LEGO also made a post last month on LinkedIn sharing some of their in-house Pride Month festivities: https://www.linkedin.com/feed/update/urn:li:activity:6547457915375099904 Hopefully this foreshadows even more positive LGBTQ+ representation from the LEGO Group in the years to come!
-
Hi all. I’m hoping to find out about any groups or events in the UK that are particularly interested in Technic Mocs, mods etc. Or at least include some in their collection. I see lots of videos and photos of gatherings on YouTube or Flickr in the US and Europe. I am aware of adult Lego groups in the uk however they are not really interested in Technic. I know that the Technic side of the community will always be smaller and I think that by nature we are more solitary creatures. I do wander why it is so hard to find this kind of thing over here though, I know there are many talented builders In this country. Are we just a miserable lot? Do I really have to get on an airplane and cross the channel to see some of these custom creations in the flesh? Many thanks Troy
-
Hello everyone! My name is Chris, and I am a lifelong Lego fan from West Sussex in the UK. On the desk in front of me, I have a Volkswagen T1 Camper, modified Cuusoo DeLorean (with a number of MOC props from the Back to the Future films, of which I am a big fan), and a minifig-scale MOC VW camper with two BTTF Libyan terrorists! I look forward to sharing my photos of those MOCs with you, and asking for a little advice with a pet project I have been struggling with for a few months. I'm an occasional user of a few other Lego sites, online communities and tools. I subscribe to /r/Lego on Reddit for inspiration, use LDD to build my models, and head over to BrickLink and Brick Owl to buy the pieces I need to assemble them from bricks, not bits! I look forward to being a part of this community too.
