Search the Community
Showing results for tags 'rally'.
Found 46 results
-
[MOC] 4x4 Deserty Rally Off-roader
syclone posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Good Day. This is a small desert-rally styled offroader that was made in roughly 8-9 hours during New Year's holidays. Weight of 637g. Powered by BuWizz v1. Features: -4x4 drive with slowest output of buggy motor -Return-to-center steering (m-motor) -Independent suspension on all wheels -Over 2 studs of clearance under the car -Openable doors, bonnet and trunk. -Detailed engine bay & interior -Stickers all over the car, including rear-view mirrors & rear lights -Minor detailing on the outside (lightbar, antenna...) The suspension mechanism relies on the vertical movement of the drive input of the axle , changing main pivot point from one CV to another, allowing for each wheel's independent movement from each other. Video: Photos: Thanks for reading! -
Winter-Ready Porsche 911 GT3 RS
StudRobotics posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is Lego's 42056 Porsche 911 GT3 RS set with some unique rallycross-inspired features I added making it the perfect sports car to drive in the snow. Features Suspension system raised to make the car about two studs higher Wheels and tires from the 42037 Formula Off-Roader Mudflaps LED light bar Front off-road lights Rear bash bars Optional snowplow that attaches to the front The lights are fake and don't turn on, and all of the other lime-colored pieces are from the 42037 set as well. I had a lot of fun making this. I just had to switch of the area of the springs to change the height for the rear without any pieces needed, but for the front, I had to remove the entire Porsche's body to make the lift there using a variety of pieces. Overall, I'm proud that a got the result I wanted, which was making the Porsche 911 GT3 RS higher (so it wouldn't bottom out) and equipping it with off-road features so I could have fun with this set in the winter. It does need to drive in snow only about an inch high so I could move it without getting stuck (and so the plow can move the snow too). I recommend to anyone who has the Porsche set to try these mods out for themselves this winter! Here's some more pictures of the car and a desktop wallpaper that I created wishing everyone at EuroBricks Happy Holidays! -
RC MG Metro 6R4
All_About_Lego posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi! so, this is my first post on Eurobricks, I did actually make this model about a month ago, but I thought I might as well share it here too. MG Metro 6R4 by All.About.Lego, on Flickr So, here is a list of its functions: Front and rear independent suspension 4-wheel drive (RC) steering (RC) Working front and rear lights (RC) opening doors opening rear door/boot/bonnet (or whatever else you want to call it)... A detailed interior (with a roll-cage and seats) and loads of stickers... MG Metro 6R4 by All.About.Lego, on Flickr In total this model has 9 PF components: 2 L-motors, 2 pairs of lights, 1 servo motor, 2 AAA battery boxes, and 2 receivers/remotes. It was a bit of a struggle to cram all of them into such a small MOC, while still having independent suspension, and 4-wheel drive, but luckily I still managed to do it! This is the chassis I used for it: Lego Technic Compact 4-wheel drive chassis by All.About.Lego, on Flickr and of course, since I was doing the 6R4, I had no option but to make almost 40 stickers, just so I could recreate the iconic 'Computervision' livery which some of the 1980's group B rally cars had. MG Metro 6R4 by All.About.Lego, on Flickr that's pretty much everything, so I hope you like it, and any comments would be apprecited! Here is the YouTube video: Some more pictures: MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr4 MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr MG Metro 6R4 by All.About.Lego, on Flickr here are some pictures of the original car: MG Metro 6R4 - Original car by All.About.Lego, on Flickr MG Metro 6R4 - Original car by All.About.Lego, on Flickr MG Metro 6R4 - Original car by All.About.Lego, on Flickr -
[MOC] Sébastien Loeb's DS3 WRC (BuWizz)
Anto posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi! Two years ago, I had made a Gymkhana with Ken Block’s Ford Fiesta. It drifted well, but I wanted to do better using the BuWizz. So I decided to make a better chassis and pair it with the bodywork of the world’s best rally driver’s car : Sébastien loeb’s DS3! This new chassis‘ works in the same way as the old version, but it’s better at drifting. First of all, a reminder of how it works: When turning, the adherence at the rear axle is decreased. This is due to the caster angle of the front axle which lifts the rear interior wheel. (Like a karting il me semble qu’on dit a go-kart mais il faut vérifier!!) So, what changes with this new chassis compared to the old version? The caster angle is the same, but the swerve front wheels relative to their pivot point is decreased (?). The rigidity has been decreased, and the transmission has been upgraded. Now, it has less friction. The consequence is that the difference of adherence at the rear axle is smoother when turning, so drifting is more realistic. Furthermore, there is the amazing BuWizz power! However, the car isn’t easier to handle. (It takes a lot of time to control it perfectly) This car has got stickers, and building instructions! Both have been made by Thorsten Spelz, so thanks to him! Click here And now, the Gymkhana! -
[MOC] RC Lego Dakar Truck
MattL600 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey guys! I'm new here and just got back from the dark ages! Though, reasonably early as I classify as a TFOL! Anyways, this is my first moc and I managed to build it in a day! Because my collection is reasonably small I am incredibly proud of it :D Please watch the video and give me feedback! Thanks guys! -
[MOC] Waving goodbye to 2016 with this little RWD drift car!
896gerard posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
As a last goodbye to 2016, I present this small red car. It is not really built to be particularly good looking (I used a wire bodywork to have a low weight) or to have a particular high speed. But what it does, is put a smile on your face. Technics are kept simple, there's an RC buggy motor next to a PF lipo batterybox in the middle, a PF medium steering motor before the front axle and an IR V2 receiver to enable 1 metre of infrared range when going outside. Please Lego... Please... do something about it. The frustration and anger about this appalling range is powering companies like S-brick. And that's why my future cars are having an S-brick, leaving this model as one of my last PF IR remote controlleds MOCs... We're making a fun car, right? So there is a silly spoiler and huge rear tires. By the way, these wide tires provide excellent traction in dry conditions, which is important for low-weight cars like this. The interior had to be sacrificed to have a low position for the drive motor and battery box. Because of this measure, the handling was quite good, but made much worse by the slow PF IR remote. In the end, of course there is the video: The longer story can be read on MOCpages and better photos are on Brickshelf. Have a nice 2017! -
Hi there guys! I'm glad to introduce you my ford fiesta wrc wich has the following features: - New shock absorbers design - Macpherson suspensions strut - Lockable differential - Personalized vinyls - 2 RC motors - Motors saving differential My goal for this car was only one: DRIFT then i started thinking: "what car is known for drifts?" and the answer was only one THE KEN BLOCK'S CAR !!! So i started building this one trying to replicate those colors...then i wasn't so satisfied so i decided to print my own stickers.... I created a template (wich im gonna share soon) to paint vinyls on new panels and i'd say that im pretty happy now :) Let's talk about performances now: even if it weighs 860g it's still fast....doesn't have an amazing acceleration anymore but it still drifts on smooth surfaces expecially when the wheels lose some grip by collecting dust and it's pretty funny to drive! About the chassis: it's very simple and the weight is well distributed, to cause the most loss of grip to the rear wheels, by placing a battery in the front of the car... As every motor has its own battery and reciver i added a differential inbetween the two motors...you know, sometimes recivers can lose signal and i didn't want to get my motors damaged There's another differential that connects the wheels wich can be locked to cause narrower drifts... The new shock absorbers design (for those who didn't see one of my last posts where i was talking about that) is really simple....and even if i didn't use the spring taken from the lego one the dimensions are the same, so 100% purists can use it as well I hope you like it! stickers aviable here http://p-lego.blogsp...roduce-you.html they're in the A4 format so you just need to print the file above as it is (obviusly download the full res one by clicking to enlarge the picture ^^)
-
Hi Everyone! Just made a new #legocity moc- a rally raid truck. Here are some pics and how_to_build video of it >> and how to build TUTORIAL video >> http://www.youtube.com/watch?v=www.youtube.com/watch?v=zXwAtReYtsM Thanks for Watching!!!
-
[WIP] Audi Quattro Rally Car
Teo LEGO Technic posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Here's the beginning guys, after a long break a new MOC, the famous group B Audi Quattro rally car. All I've got so far is a front. IMG_3652 by Teo's Technic, on Flickr I'm thinking to make the bottom part of the bumper white, and also fenders and a line along the bottom all around the car white as well. -
[PORSCHE] Rally Group Be
Jurss posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Imagination of legendary rally Group B electrical car (design is from those times, pullback motors imitate some kind of electrical drive). Model has: - independent suspension on all wheels - HOG steering - steering lock, which is made as gear switch, to lock wheels for pullback function - openable doors - and front part - rear mudguards, which move together with wheels. Steering unlocked Steering locked Of course, it is not very good lock because of other steering parts, but HOG steering button is locked very good. -
Moscow Rally BAJA Downhill
LegoDego posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is our first attempt to organize this type of event (unfortunately only 5 members). Here are several models of the participants: This is heir to Black 13 And our track (with jumps ) Repairing)) The video will be , but not soon. I hope you like it) -
[TC9] Rally racer
Zerobricks posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Here is my entry for the TC9 challenge A MODEL It is made out of 949 parts and it has functions including but not limted to: - All wheel drive - Independent suspension on all wheels - Working gearbox - Moving V6 piston engine - Working steering wheel - Adjustable seats - Openable doors and trunk - Detailed rollcage - Sporty colors and livery - Power Functions ready The front is full of lights and LED bars Notice the massive rear spoiler, massive exhaust system and the rear diffuusor Doors and the rear boot open, showing the internal rollcage and adjustable seats Size of the car is 35,5 studs long, 20,5 studs wide and 13,5 studs high, giving a total of 9824,626 cubic studs And the usual "money shot" of the chassis. The suspension and drive use a hybrid drive system with the drive axle used like an live axle, yet wheels suspended in a independent double wishbone configuration. And finally a digital render of the detailed rollcage: Look at it go: B MODEL Rally car rebuilds into an F1 car with following functions: - Realistic working pushrod suspension - Moving V6 piston engine driven by rear wheels - Working steering wheel - Adjustable spoiler - Openable rear to - Detailed engine bay with six exhausts The F1 car is a very low and stable model Notice the rear wheel drive, rear light, the detailed diffusor and the rear springs Rear covers can open up, exposing the pushord suspension, V6 engine and the 6 exhaust systems B model is 45 studs long, 24,5 studs wide and just 9 studs high, giving it a total volume of 9922,5 cubis studs For more details please check out the following video: -
[MOC] Terrainroader (rally car)
MoonCZ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi guys, This is my LTR (Lego Technic Rally) car, which i have build a few years ago. It has independent suspension on all wheels and it is all wheel drive. Because it is for rally i have used two RC motors for propulsion and experimental gearbox (low gear for offroad, high gear for flat roads and downhills). As you will see in video everyone use cable remote, it's because of RC motors power consumption (in that time there wasn't V2 reciever) and weight. This car no longer exist, but i still have the chassis without gearbox. Remotely controlled functions (cable): Driving (2 RC buggy motor) Steering (http://www.peeron.com/inv/parts/47154) Gearbox (M motor) Propulsion: slower RC motor output to gearbox ( 1:1, N, 12:20) and then 20:28 (differential) Steering: 12:20 to 8:steering rack Weight: about 850g Speed: (fast walk) :-D Brickshelf gallery: http://www.brickshel...ry.cgi?f=490253 Video(from the Race): Front: Back: Bottom: -
Hi! Sooner or later, but I took the time to introduce you new MOC - a rally car. I will not write a lot, because want relax... Summer... I like rear suspension. It really work good. Idea is the same as on my small front suspension. Off course rear works better, and besides, I have improved it for the next model, so i'm doing instruction soon. Functions: - rear drive - all independent suspension - opening doors/hood - work front light - steering witn auto return Video: I'm doing second video, with drift and just driving. Photos: (Thanks rm8 for stickers ) All photos on Google+ Thanks for watching
-
Lego Rally Machine
uefchen posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hallo , here I have a LEGO Rally Automata built in Retro Still . Here the Link to the Vdeo Have fun lookng by üfhen -
[MOC] 1:10 Lancia 037 Rally Car
Hrafn posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is my first ever completed Technic MOC, originally inspired by Piterx' Lancia Fulvia but much simpler. It's not quite done, but I anticipate being able to spend very little time on Lego in the next year or two, so it's as finished as it's probably going to get. There is no gearbox or interior, and there are a number of things I'd change if I had the time - but overall I'm pretty pleased with it. The 037 was the last rear wheel drive rally car to win the WRC, in 1983. It raced in the infamous Group B category, which had few restrictions on vehicle design and engine power; as a result, the overpowered cars were in a number of fatal accidents, and ultimately Group B was abolished. While it lasted, though, Group B saw some spectacular driving and some extremely fast and loud cars. The Martini Racing stripes are done with washi tape (fancy Japanese colored masking tape), which works OK except where the tape crosses pin holes. It actually looks better in person than in photos. As in the original vehicle, the hood and rear lift up, and the doors open and more or less lock in place: Also like the original, the model is mid-engined. I used 1 RC motor geared 12:20 from the fast output. Until I put the bodywork on, the car could do handbrake turns and drift on wood floors, but now that the vehicle weighs 1030g, it can't drift and can only rarely do handbrake turns. I'm especially happy with the front axle, which includes a decent wheel lock, caster, unequal length wishbones, near-Ackerman steering, and a scrub radius of nearly zero. My thanks to all of those here who offered advice on suspension - I learned an enormous amount from you all. Steering is by servo, which offers return to center, reasonable speed, and high torque. I use a basic remote because the train remote is too slow for me to keep the car from crashing; the downside to that is that proportional steering is impossible. Wheel lock, steering, and scrub radius: Caster: The hub is held together by the 4L axle with stop (and the half bush on it), which turns out to be a more robust solution than I'd expected: The rear suspension is a modification of Thirdwigg's floating differential. It works well, with one caveat. Every once in a while, the 3L axle driving the 20t gear slips towards the differential a bit, and once when this happened a 3L u-joint got destroyed by torsion. The rear suspension is hard and has limited travel, and the suspension arms are tilted up even at rest; I would fix that if I had time. And of course the obligatory under-chassis shot: -
[MOC] 'Lightning GT-RC' Rally Car
jg711 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi all, This is my first MOC post. The Lightning GT-RC or GT-RallyCross. The car: Engine: Li-Po Battery powered RC Buggy Motor. Propulsion: Engine right to the rear differential, possibly with a center shaft to the front differential. Steering: Currently M-motor with rubber band auto centering. Performances: Engine: 4.5 W @ 1200 rpm. Top Speed: 8 km/h (5 mph) Weight: 570 gram Dimensions: 37.6 X 19.4 cm A picture: -
Hi everyone, it has been some time since I posted here. Finally I managed to complete this MOC. When I first saw 60025, I thought it was too sloppy and modified it to make the Octan Audi R18 LMP. Here with 60027, the same appeared to me. Monster truck? The truck was too weak too, so how about something even more interesting? Airborne Spoilers is now a rally group, let's take a look! Indeed it is quite long! Let's first look at the support jeep! "Hey man, don't take the tools again without letting me know!" "C'mon!" The back of the jeep. It is based on the nice fire captain car, but one layer of brick raised. You know rally tracks are all bumpy and sandy... Second is the truck. It is not just a trailer truck, but also a truck with a little lifting crane! The arm is perfect for maintenance and repair of the rally cars, but seriously it cannot do something too heavy, but these guys say "enough for now"! The final car is of course the rally star, the rally truck! The 6-wheel machine has no problem at all racing through the dessert or wet swamp area. I was planning to put on a lot of sponsor stickers, but I believe it is better to leave it this way... what do you think? "Hey don't move yet! Something to fix at the hood still!" "I can't wait, quick!" Well, the star racer is probably too excited, and the rally truck is not enough for him. He also has his rally bike! Gosh, he is too hyperactive! When the race is over, when the guys are all packed up, someone probably smells it... "a race going on here?" An overview of my MOC based on 60025 and 60027. All my racing crews are here! :) Let me know what you think!
-
simple lightweight rally car
nnamhcab posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
so i've been reading around on the forums trying to find a design plan for a simple lightweight rally-ish car and i decided to just try it myself i just finished tonight and ill have pictures uploaded soon if there are any other topics that meet these criteria post them below thanks -
lightweight power functions buggy
nnamhcab posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I've refined this model many times and this is the final version. a simple buggy powered by two medium motors rear wheel drive with diff its pretty fast and does alright off road a simple modification to the design could allow for an xl motor to be put in and geared up. in the model the steering rack sits in the slot at the front of the vehicle and connects to the 1x6 links and the two 1x8 axles connect in the front to form the tube body frame. i also couldn't find the ir reciver it attaches to the pins that are on the roof of the buggy and hangs upside down and inside the frame work. other than that its complete. buggy.lxf -
Rally jeep "Storaq 2.0"
Sicil posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello. I want to present you a model to Technic Rally.Nothing in common between this model and the "Storaq" no, except for appearance. I used all the electrics of crawler, which resulted in a high speed on obstacles. Compared with the previous model, "Storaq" I modified the rear part of body. There are front and rear suspension in this model. Datasheet: - 2 L-motor to the drive with gear 3:5 - Servo motor on the steering - IR receiver a new type, BB That's all. Thank you for your attention. Your Sicil. Sorry for my bad english.
