Search the Community
Showing results for tags 'mecha'.
Found 263 results
-
Hey folks, New here and hoping to find someone interested in helping me with my project. I'd like to commission someone to design the 7 Divine Knights from the Trails of cold steel series for me. I got full 3D models available in blender for reference. Each one has a different color scheme and details but a similar framework, so I think this would be a really fun project. If you're interested please feel free to throw me a message. （╹◡╹） Cheers
-
After building version one of this mech a couple of months ago, I realized that I needed stronger joints. It would hold a pose, but just felt to fiddly and prone to flopping over at the hips. This new version feels much sturdier, and I've made instructions for it and shared them on Rebrickable. See more on flickr
-
I need help with making lego mecha joints, and a good technic frame.
-
Heartmelter Mark I by CJ Hendrix, on Flickr See more on flickr Build in real bricks and instructions coming soon.
-
[MOC] Pumpkin Mecha
SilenWin posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone! This time I decided to come without trucks, supercars, and other wheeled vehicles. No, even without tanks or cranes In Russia, the traditions of celebrating Halloween are not well developed, but this does not interfere with the fun at all! This year I was unable to grow a beautiful orange pumpkin, so Lego came to my rescue! The pumpkin-mecha turned out to be a good decoration for the house, the guests were amused by its spider-like legs, and the absence of obvious signs of eyes and mouth made the imagination work hard while looking at the patterns from the panels that make up the body. This strange robot consists of 80 orange panels, weighs 378 grams, is 22 centimeters tall, and 15 centimeters in diameter. In general, the body of the "pumpkin" itself consists of 8 segments, exactly the same except for the inner part (8 ball-joint sockets for the feet did not fit inside one ring). It can be assembled quite simply from 4 parts (although the final connection may turn out to be somewhat tricky). The internal structure, consisting of three rings (one large and two identical smaller ones), allows all panels to be rigidly fixed and not to fall apart even when dropped from a low height. I am very happy that I managed to do without System parts, as well as without Bionicle elements. As a result, I can say that this is 100% Technic pumpkin I hope you enjoyed it, just in case I will leave the stud.io file if anyone wants to experiment with such cone-shaped structures. See you next time! -
Hello everyone, I'm working on a 40cm tall Gundam, and I need advice on the waist. I would LOVE to have a rotating waist, but given the size and weight, I'm worried it would be a point of failure. Given the dimensions, I'd be relying on a 4x4 turntable plate and that axel to hold the 2 halves of a giant robot together. The idea being that the hips will be built around a gearbox that is re-enforced such that it can be pulled apart vertically so that the axel and 4x4 turntable plate will attach it to the torso. The end of the axel inside the upper torso is flared and can't be pulled out from this end, so as long as the tension on the hip side holds up, the build should stay together. The alternative is very appealing because if I go with one solid torso, I can really reenforce it with pegs, but the downside is that i will lose functionality and the torso will just kinda be a big ol' brick. Is there an approach that I don't know about that might help? I know Lego generally shies away from any kind of hip articulation and i assume it's for structural integrity. The alternative-alternative might be using super glue to glue those gears onto the axel, thus ensuring it can't come apart, but i feel kind of dirty using glue on legos, even if they can be dissolved later if need be. Thanks for all of your help. EDIT: so apparently i don't know how to attach images? I tried to attach two images to assist but they won't display?
-
[MOC] Lego Mechanized Mobile Combat System - MeMoCS Mk. III
ParmBrick posted a topic in The Military Section
Hello everyone! After a long absence I'm finally back. Today I present to you my new creation, a military mecha, I hope you like it! Special thanks to Instagram user m1ndxbend3r for the inspiration. The Mechanized Mobile Combat System Mk. III, abbreviated MeMoCS, is a state-of-the-art multi-role military platform designed to operate in any modern battlefield and conditions, from open spaces to urban combat. It's an anthropomorphic mecha with 6 limbs, 4 upper and 2 lower. Has an armor in composite materials and new ultra-resistant alloys was made to protect against a wide range of threats (mines, RPGs, IEDs, heavy calibers, and some types of cannon shells), also has active contermeasures. New and more powerful miniaturized servomotors and servomechanisms have been used to guarantee unprecedented smoothness of movement. Power is guaranteed by a hydrogen fuel cell battery. The cockpit can accommodate a single pilot who maneuvers the MeMoCS safely. The MeMoCS Mk. III is equipped with numerous sensors: high definition optical viewer, high sensitivity thermal viewer, laser warning system, radar, jammer, and is equipped with an advanced radio, satellite and GPS communication system, plus a modern situational awareness system that, together with its powerful computer, makes it a fearsome weapon, versatile and adaptable. Given its multirole nature, it can be equipped with a wide range of weapons: rifles, CROW systems, missile pods (both ATGM and surface-to-air), sidearms and shields. -
The render images are generated by Studio, I didn't take pictures because I was too tired after finished the instruction.... The tail is movable.
-
I'm quite new to Eurobricks Community, so I'd like to start presenting my MOCs with my biggest one so far: it's a Warlord Titan from Warhammer 40000. IMG_20190407_171303-01 by Lorenzo Brovia, su Flickr FB_IMG_1565485466005 by Lorenzo Brovia, su Flickr warlord titan 2 definitivo_2 by Lorenzo Brovia, su Flickr 4966 pieces, about 56 cm tall, designed entirely with LDD (then rendered in Stud.IO) and then built in real pieces. It was a real challenge to design it, in order to make it sturdy enough to let it stand by its own (a must for me),even tough it is still poseable, can rotate the waist, the legs, the arms, the head (a little) and the shoulders cannon. I think that there is no need to describe from which LEGO theme inspired me the color scheme and Heraldry ;-)
-
I present to you, the first gundam of Allelujah Haptism in the series : Mobile Suit Gundam 00. Type: Lego Gundam Name: Gundam Kyrios Code: GN-003 Size: 1/60 Pilot: Allelujah Haptism Team: Celestial Being Series: Mobile Suit Gundam 00 ( 機動戦士ガンダム00 Kidō Senshi Gandamu Daburu Ō? ) Reference: _Non-Grade 1/100 _High Grade 1/144 _Anime This is my Facebook page: https://www.facebook.com/demon1408/ Flickr album: https://www.flickr.com/photos/148042982@N03/albums/72157710585691868 DevianArt album: https://www.deviantart.com/demon14082000/gallery/70316722/lego-gundam-kyrios-gn-003 You can also check this video for full gimmick and articulation :) These are more image LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr With weapon LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr Since this is a transformable Gundam , I also implement the Flight mode for this Kyrios LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr With a team: Gundam of Celestial Being by Demon1408, trên Flickr Thumbnail by Demon1408, trên Flickr
-
[MOC] Monkie Kid and the Legend of Korin
Aliencat posted a topic in LEGO Action and Adventure Themes
Hey everyone, This is my first real Monkie Kid MOC Our heroes receive help from the Great Master Korin Mech, to stop Scream, the Evil Warlock Mech Rat from poisoning the land! Check out the Flickr album for more pictures: Monkie Kid and the Legend of Korin -
The mechanical detail is more aesthetic than plausible. Yet, there are elements taken from what an early steam walker should have looked like, besides the vibrant colours. Most of its inhards are shown, there are very few largue pieces of metal, structural elements take over shape design. It is somewhat outlandish, taking a mechanical shape similar to that of many tin toys. Even if it seems to be something rather decorative, there are a few tricks to make it more resistant than it seems. Legs rest directly over the axle pillar and the superstructure it hides. Feet are also anchored to the base to avoid deformation.
-
Back in 2017, I finished my second version of the Koenig Monster from the Macross anime series. My first version was about another third larger, but the joints just couldn't handle the weight, and I subsequently decided to downsize and try again. Fortunately, I was able to make it work. Initially, I wanted to use a two-tone tan with red accents as the color scheme, based upon some art I found online, but as I worked on fleshing out ideas in LDD, I discovered to my dismay that a number of the parts I needed weren't available in the tans at the time, and having accumulated a lot of blue and gray, decided, like my first attempt, to just build it in Classic Space colors and styling. It stands about 15 and a half inches tall to the tips of its cannons, transforms without removing parts between all three modes, is fully articulated, and features retractable landing gear in shuttle mode. Since these pics were taken, I've since updated the canopy section with a more line-art accurate access panel using the 4x4 trans-yellow dish from last year's Batcave set. Eventually I'll take some pics. Hope you like. https://www.flickr.com/photos/95379588@N08/44181063412/in/album-72157666939175729/ https://www.flickr.com/photos/95379588@N08/42422129770/in/album-72157666939175729/ https://www.flickr.com/photos/95379588@N08/44181265472/in/album-72157666939175729/
-
I’ve always been a fan of battlemechs, spending hours playing mech warrior followed by trying to build them from classic Lego in the mid to late 90s and needless to say, they weren’t good. Fast forward 20 years and with new parts and me being (slightly) better at building I’ve given it another try and made my own, which is more like a Warstrider from the book series of the same name rather than a battletech mech. I first build this around a year ago but didn’t get as far as posting it and since then I’ve tinkered and changed it as everyone does. Rather than just post the current build I thought I’d post the first iteration for completion and so that my thought process can also be seen https://imgur.com/a/NhjQZL6 The HK-55 barracuda, twin laser cannons, missile racks and a chin mounted particle cannon. I tried to upload the images rather than just a link but they were too large. Its a fairly standard mech, bird legs, two arms and shoulder missiles. The series Warstrider describes them as looking like an aircraft fuselage with arms and legs attached and that’s what I was going for, and the pilots lie in a small coffin sized space where the neural link is complete, the pilot ‘becoming’ the strider as opposed to a battletech cockpit. In that series the striders are also 5m tall at most rather than the 10m mechs from battletech. It fits a fig, with feet ‘standing’ on a snot plate just at the join of the main body to the nose, and the interior of the nose is a trans orange piece to represent the reactor which itself is covered by further modified snot bricks for the sideways and upside down building. Early on when building, I had ideas for several mechs and they were going to follow a deep sea naming convention, so I’ve tried to keep dark colours on top, light on bottom. I’ve also tried to build compact so that it did not end up being massive. I also tried to get a suggestion of gills along the side of the nose, which in universe would be heat sinks. The reverse legs look cool but they weren’t good at keeping it stable and it was hard to pose so I had a rethink and I’ve rebuilt it as such: https://imgur.com/a/IX2qkVU The new legs are a huge improvement, it looks menacing and it’s easier to pose and handle. My previous idea of marine creatures being represented has now been transferred over to dinosaurs, and ‘heavy claw’ is the name for baryonyx. I’ve got several more planned that need just a bit more tinkering before showing off, and who knows I may start working on a completely different tangent altogether! This still has a few adjustments I’d like to make, most around the thighs. I’m happy with the proportions it’s more the detailing. I’ve also tried to make these as smooth as possible, with as few studs showing as I can manage. Another important factor for me is an actual element of play, hence the spring and stud shooters, I like to incorporate these where I can. Comments and critique welcome and if you’ve got some different mech builds aside from the typical giant mech warrior then put them up! More mechs and battle suits to come, hopefully along the same dinosaur theme! P.S if you like sci fi and mechs I do recommend the book series ‘Warstrider’.
-
Eagle transformer mini mech (28 bricks)
-
Mini size Combiner Transformer Robot. I think if I try to build full version combiner mech (6 vehichles), it would be too big one and need to many bricks. So I built this combiner made with just 3 heavy vehicles.
-
My new moc... Name : Justice gundam Code : ZGMF-X09A Series : Mobile suit Gundam Seed Pilot : Athrun Zala ***Check this link to see Finished version : http://www.eurobricks.com/forum/index.php?/forums/topic/144681-moc-justice-gundam-zgmf-x09a/ Full video : Built to fight side by side with Freedom gundam : Stand alone with Fatum-00 unit and the Fatum and be attached on its back or this style... but need support base I will finished this moc soon, hope you like it ! ***Check this link to see Finished version : http://www.eurobricks.com/forum/index.php?/forums/topic/144681-moc-justice-gundam-zgmf-x09a/ My previous moc : Thanks for visiting !
-
T.A.L.O.N Tactical And Lightweight Operating Network
Takanuinuva posted a topic in LEGO Action Figures
A mecha moc I made in LDD a while ago that I decided to create for real. http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_1.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_2.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_3.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_4.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_5.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_6.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_7.jpg http://www.brickshelf.com/gallery/takanuinuva/herofactory/t.a.l.o.n_8.jpg -
The troso is super fragile but worth it for the shape. The articulation is alright
-
Gun Turret Transformer Robot (similar with Overwatch Torbjörn Turret)
Mini LEGO posted a topic in LEGO Sci-Fi
Gun Turret Transformer Robot (similar with Overwatch Torbjörn Turret) https://www.youtube.com/watch?v=PrWeya7rzAQ -
I tried to build a combiner robot which doesn't include 1x1 handles (26047), 1x1 clips (15712) and 1x1 brackets(36840, 36841) this time.
-
It is a transformer robot which can turns into scorpion-shaped robot mode.
-
Yes! this my 3rd rendition of LEGO Snapdragon since the very first one made I about 15 years ago (when I first rekindled my passion with LEGO as an adult) VERSION 1 (2004) Back then most of the parts I used came from LEGO sets so I just make do with whatever colors I had. More photos here: Snap Dragon: A LEGO® creation by Yap Alan : MOCpages.com VERSION 2 (2012) Leaps and bound improvement over v1. I was pretty satisfied with the outcome then. I even cloned 2 extra copies of this creation to be displayed in a LEGO exhibition in 2015 .. so visitors can see all 3 modes More photos here: Fall of Cybertron Snapdragon Triple Changer: A LEGO® creation by Yap Alan : MOCpages.com On retrospect, I found version 2 to be pretty dated now with a few design glitch > like protruding robot head on the jet undercarriage > weak jet nosecone design that tend to detach easily > shoulders too wide (think "ROTF Leader Class Optimus Prime") > robot back kibble jutting out at a weird angle. VERSION 3 (2019) What meant to be a quick 1 week project , dragged on to about 2 weeks: My overzealousness got the better of me. Part of the long list of to-fix's: > Every nooks and corners were rebuilt to strengthen weak hinges > Rounder/more cylindrical arms. > Nosecone-kibble tucked in more neatly to the robot's back. > beast head too funny-looking. off with the buck teeth! > narrower shoulders. ..and of coz... a color scheme closer to his G1 toy version. more photos here: Alanyuppie's LEGO Transformers: LEGO Triple Changer Snapdragon version 3 Alan Yap (@alanyuppie78) • Instagram photos and videos Alanyuppie's Brick Adventures Alan Yap's LEGO Transformers
-
Transformer robot which transform into various flight jet forms.
Mini LEGO posted a topic in LEGO Sci-Fi
This mini robot can transform into a big fighter jet. The fighter jet is half as big again as the its robot mode. It has 4 cannons on his arms and legs. The cannons' color is gray. So, that's why it's called 'Gray cannon'. in this video you can also see how I take a film for a stop motion transformation scene. -
The terror of it! The mechanical grinding of its gears and hissing of its hydraulics send shivers down the spines of even the most veteran, harden soldier. This is the Blacktron Harvester!
