Search the Community
Showing results for tags 'invasion from below'.
Found 10 results
-
Receiving transmission: "Commandant. We have recovered the secret data from the archive. The data was highly encrypted but after our best hacker decrypted it, we found out that it had highly sophisticated mech frame plans. We carried out the XTS-620 experimental mech frame to the test range and it pretty much passed all the test in record timing. This is one of the most destructive mech we have ever built. We call it "Twins". This "Twins" mech is piloted by two pilots working in perfect harmony with eachother. The left side is mounted with a highly destructive gauss ion cannon. It has enough power to pierce our experimental "Cocoon" armor. The weapon is still not fully tested so do not go over 70% power or you risk destroying the arm completely. On the left side, we have a high pressurized pyromite launcher that has 3 times the range of our standard pyromite launchers. Also for melee combat, the left arm is mounted with a large plasmite claw. There is enough power to crush a class 5 titan head like an egg. The legs are equipped with experimental dampening systems that allow the mech to jump down without any damage to the actuators. This mech requires highly trained pilots that can sync up in perfect harmony. We have sent you this experimental mech for a field test on real action. Be cautious." -Mech build lab
- 1 reply
-
- hero factory
- invasion from below
-
(and 12 more)
Tagged with:
-
Receiving transmission: "Commandant. We have a solution to the invasion from the coast side. We would like you to try our latest weapon: the XT-G20. This combat walker is equipped with heavy lasers that will destroy the flying enemies with pinpoint accuracy. The lasers need a short time to ramp up but after charged, they can shoot down fliers from long distances. To keep swarming enemies on their toes, we added 8 long range missile pods to the shoulders that have flak tips. If however an enemy or two gets to land, we gave the XT-G20 arms that can punch or grasp into things. The XT-G20 is a heavy class mech with medium armor and it's only weakness is attacks from behind. It's however exceptional at long range anti air combat. Use your radar and locate the enemy fliers before they get too close. We have sent you 5 XT-G20's to help you in your next mission." -Mech build lab "Alright, let's see what this mech is made of. There is a large swarm headed our way." -Commandant
-
- hero factory
- invasion from below
-
(and 10 more)
Tagged with:
-
Receiving transmission: "Commandant. We have designed a new weapon for your command. May we introduce to you, the SW-K10. We nicknamed him.. "The Sasquatch". This combat walker is equipped with corrosive pyromite flamethrowers that will melt the armor from the outside and cook everything in the inside. This pyromite chemical will stick to any surface and continue to burn up to 5 hours on it's own. For ranged combat, we added some explosive tip medium range missiles to help you get closer to the enemies. We do not recommend to get up close and personal but as a last case scenario, we added some plasmite claws that heat up and help you claw trough heavier armor like it's paper. The SW-K10 is a medium class mech with high armor so it's only weakness is the slow movement speed. But the armor should make you durable enough to withstand long ranged weaponry for a short duration. Use terrain as your advantage and get to medium or short range to wreak havoc to the enemies. We have sent you 10 SW-K10's to aid you in your next mission." -Mech build lab "Ten SW-K10's deployed. Let's turn up the heat and roast some aliens." -Commandant
-
I loved the Beast designs from Hero Factory 2014. But I thought they could be better so I made some modifications. I'll only be showing 2 pics of each Beast mod. The rest can be found in the gallery when its public http://www.brickshel...ry.cgi?f=554165 I also have an .Lxf file for the builds just without the beast heads since there not in LDD yet. http://www.brickshel...ast_revamps.lxf Jaw Beast Mods Different torso build inspired by Leewan More purple spikes and trans blue. Pics http://www.brickshel...omBelow/001.jpg Vs Stomer http://www.brickshel...omBelow/005.jpg Flyer Beast Mods New wing build and hands Improved radio antenna design Digigrade legs and toe claws Printed chest from Crystal Beast since the colors better suit Flyer and 2 printed leg pieces Pics http://www.brickshel...omBelow/007.jpg Vs Breez http://www.brickshel...omBelow/011.jpg Splitter Beast Mods. Small Beast Red cocoon piece for back armor since its like Tunneller Beast in terms of size Trans orange bones Pics http://www.brickshel...omBelow/015.jpg Vs Furno http://www.brickshel...omBelow/014.jpg Splitter Beast Mods. Large Beast Trans orange armor swapped for solid orange Digigrade legs and toe claws Improved light stand design featuring a stop light Pics http://www.brickshel...omBelow/016.jpg Vs Evo http://www.brickshel...omBelow/020.jpg Combined pics. The two combine via bar connections attached to the large beast http://www.brickshel...omBelow/021.jpg Vs Furno and Evo http://www.brickshel...omBelow/025.jpg Tunneller Beast Mods Six legs since I didn't like the arms Pics http://www.brickshel...omBelow/026.jpg Vs Surge http://www.brickshel...omBelow/030.jpg Crystal Beast Mods New body design with more back spikes inspired by Leewan New hands since I didn't like the staff Digigrade legs and toe claws Pics http://www.brickshel...omBelow/032.jpg Vs Bulk http://www.brickshel...omBelow/036.jpg Queen Beast Mods Six legs and six back spikes New torso and hand design More gold chima armor pieces Pics http://www.brickshel...omBelow/042.jpg Vs Alpha Team. Also includes cocoons and jumpers http://www.brickshel...omBelow/038.jpg
- 1 reply
-
- Hero Factory
- Invasion from Below
-
(and 2 more)
Tagged with:
-
[MOC] Stormer's Polar Walker (Stormer's Freeze Machine + BA Ro
LordChris posted a topic in LEGO Action Figures
Hi everyone! This is the first MOC I've put on here, and it's a combination of Rocka BA, Scarox and Stormer's Freeze Machine. Apologies for picture quality. Also, for some reason, this place won't let me insert my pictures from Flickr? Front: Stormer Polar Walker Front by chrisharris1994, on Flickr Side: Stormer Polar Walker Side by chrisharris1994, on Flickr Back: Stormer Polar Walker Back by chrisharris1994, on Flickr The Freeze Cannon. Note that I left the design almost exactly the same as the original Freeze Machine Stormer Polar Walker Freeze Cannon by chrisharris1994, on Flickr And here it is attacking some Jumpers: Stormer Polar Walker Attack! by chrisharris1994, on Flickr Hope you like, and I look forward to feedback!- 6 replies
-
- Hero Factory
- MOC
-
(and 1 more)
Tagged with:
-
So... I've been hinting at this in my signature for a while and the MOC itself is coming along nicely, so I thought I'd make a topic about it. I'm currently working on a head for it, and I wasn't sure which head to use on an MOC that's going to be almost 50cm tall, and bulky - traditional or built from scratch: Hero Factory MOC - Beastfather head ideas WIP by TheOneVeyronian, on Flickr I'll reveal the rest of the Beastfather MOC in due course, but for now, I'd like to seek opinion on which head I should use, so please leave your thoughts either here or on Flickr (though here is probably easier ) The one on the left is still a WIP, but it's finished enough to show so you get the idea. I plan to have the rest of the Beast with a black, pearl dark gray, gold, trans-bright green and orange colour scheme, with the dark colours taking dominance, in case that helps.
- 24 replies
-
- moc
- invasion from below
-
(and 1 more)
Tagged with:
-
For some reason I fancied having a crack at creating a Jumper that is more to scale with the 2010-2013 HF sets. So, I used this image for a rough reference as to what bits to use, especially for the legs: And came up with this: LEGO Hero Factory MOC - Jumper (to scale with Hero constraction sets) by TheOneVeyronian, on Flickr As you can see, most of the pieces I had to use weren't available in any of the colours used for the jumper base colours, so it had to be all black. In fact, I don't think I've seen many attempts at these, so I thought I'd try one instead. I could have used the short shoulder torso piece, but I'm very limited in black shells at the moment and what shells you do see was all I had to hand, it would have looked very unarmoured with the other torso. The head should also be the other way around in theory but the only printed version I can get at the moment is in orange, and even then the one that comes with Queen Beast would have looked very odd here anyway. I'll probably end up modding it further anyway. Well, that's all, it's fairly simple, but I hope you enjoyed looking at this MOC!
- 6 replies
-
- hero factory
- constraction
-
(and 3 more)
Tagged with:
-
It's been a very productive day for me today, I've now got a small mecha (my first one actually) to show. I decided that my custom Stringer minifig needed a mech of his own (saw him getting jealous of my custom painted Nex piloting my revamped Evo Walker Turret thing ), so I created this small mech which I call "Stringer Sonic Machine", in keeping with Stringer's typical soundwave and sonic theme. It's equipped with a sonic blaster, a sound blade and an enormous speaker on the back, to which Stringer can pump out the tunes of that one genre of music known to bring down the Beasts... teen pop (I'm joking by the way). Here's some pics (I realise I forgot to change the dark bley lever to a black one, please ignore that): Front: LEGO Hero Factory MOC - Stringer Sonic Machine (1) by TheOneVeyronian, on Flickr Back: LEGO Hero Factory MOC - Stringer Sonic Machine (2) by TheOneVeyronian, on Flickr Pose: LEGO Hero Factory MOC - Stringer Sonic Machine (3) by TheOneVeyronian, on Flickr I couldn't quite work out if this little mech would be better with or without a windscreen: what do you think? LEGO Hero Factory MOC - Stringer Sonic Machine (4) by TheOneVeyronian, on Flickr One thing that irritates me is that I was forced to use orange in this MOC... I wish those seats were blue at the very least to match Stringer's colour scheme But otherwise, that's all for now. Hope you enjoyed looking at this MOC!
- 13 replies
-
- hero factory
- constraction
-
(and 3 more)
Tagged with:
-
My latest MOC, a Splitter Beast alternate build : MOCPage C&C are welcome. :)
- 9 replies
-
- MOC
- Invasion From Below
-
(and 1 more)
Tagged with:
-
Hi everyone, I'm finally posting some of my many revamps of my Hero Factory sets, starting with the newest released series. I'll get things started with Furno's Jet Machine: Mods done: * Added 1x2 plates to fill in gap on foot * Replaced bone pieces that made lower legs * Replaced armor shells on lower legs * Replaced torso piece with the one with narrow shoulders * Modded back of torso to removed the pod and bring shoulders closer to the body at the cost of the originals builds design Front: http://www.brickshel...chine_mod_1.jpg Back: http://www.brickshel...chine_mod_2.jpg Random: http://www.brickshel...chine_mod_3.jpg Update: I've added the squared armor attachment pieces to the machine http://www.brickshelf.com/gallery/vakama18/herofactory/IFB/jet_machine_mod_4.jpg Jaw-Beast is up next: Mods done: * Bone pieces replaced and rearranged in arms * Flipped armor shell on chest around * Added parts to fill back of head Front: http://www.brickshel...beast_mod_1.jpg Back: http://www.brickshel...beast_mod_2.jpg Random: http://www.brickshel...beast_mod_3.jpg Flyer-Beast flys in next: Mods done: * Added bone extender part to make lower legs longer * Removed 2x2 brick with socket from back and added parts to fill in back * Replaced hands with Ben 10 hands * Flipped Connector joint on its narrow side to move head closer to its body Front: http://www.brickshel...beast_mod_1.jpg Back: http://www.brickshel...beast_mod_2.jpg Random: http://www.brickshel...beast_mod_3.jpg Splitter-Beast is now next, but instead of fusing them together like I said before, I've made them two separate beast that don't combine, so I decided to name the two Chibi-Beast (don't ask) and Titan Beast: First up is Chibi-Beast: Front: http://www.brickshel...ibi_beast_1.jpg Back: http://www.brickshel...ibi_beast_2.jpg Random: http://www.brickshel...ibi_beast_3.jpg and now, Titan-Beast: Mods done: * Added smaller beast feet to the back of the larger feet * Added more bones to make him taller * Added armor shells to fore-arms * Added parts to shoulders * Made tail longer * Stuff I'm too lazy to add Front: http://www.brickshel...tan_beast_1.jpg Back: http://www.brickshel...tan_beast_2.jpg Random: http://www.brickshel...tan_beast_3.jpg Chibi riding on Titan: http://www.brickshel...B/best_buds.jpg Beast group shot: http://www.brickshel...roup_shot_1.jpg Sorry if my mod descriptions don't make sense, and if my pictures didn't out that well.
- 4 replies
-
- Invasion from Below
- Revamp
-
(and 1 more)
Tagged with: