Search the Community
Showing results for tags 'interstellar'.
Found 4 results
-
Futuron - Retro Space Solar Ship [Futuron] Retro Space Solar Ship by Horlack, on Flickr ================================== The beginning/Genesis : ================================== At the beginning of September, I re-watched the old animated as X-Bomber at 43 years old ! It was my birthday this month. Don't ask me what went through my mind at the time, I don't know at all! I wanted to go back to childhood, because I have the impression of having aged. I had to straighten "the bar", lol ! Seeing these old Retro solar boats literally “blew my mind”. I never realized that a lot of anime from that era had a "strange spaceship" conception, transforming old 14-18th century ships / galleons with engines for space. Yet it was so obvious! And it was there, that suddenly, I remembered Jayce, Cobra, etc ... In short, I saw all the ships of the anime of that time scroll through my head, like a comet in front of my eyes (which booms crashing into my head). And no one had done this in Lego. At least I don't remember. In itself, the beginning of an idea or impression that smelled good, and / or had potential. It was the very beginning of the inspiration and brainstorming in my head for Lego Classic Space ! ================================== The concept : ================================== I did something unusual, non-conformism, eccentric, disconcerting and crazy at the same time. I make a double combination and double ration, animated 70-90 which it was the fashion of space ships and Lego Space Futurons 87-90. For a good Retro nostalgia I combined elements of the Azuris ship from « Message from space : galactic wars », the Cephalus ship from Star Fleet X-Bomber, Glory of the universe of Jayce and the Wheeled Warriors, and the Solaris of the Mysterious cities of Gold ! 2 periods 70-90 in 1! Fashion Geek powa, total ! ================================== Animated Wikipedia source: ================================== https://en.wikipedia.org/wiki/Message_from_Space:_Galactic_Wars https://en.wikipedia.org/wiki/X-Bomber https://en.wikipedia.org/wiki/Jayce_and_the_Wheeled_Warriors https://en.wikipedia.org/wiki/The_Mysterious_Cities_of_Gold ================================== Youtube animated credits for the nostalgic: ================================== Message from space : galactic wars / San Ku Kai https://www.dailymotion.com/video/x3a7kge https://www.youtube.com/watch?v=Jfzb7kndOH8 https://www.youtube.com/watch?v=ev846CoLg1c Star Fleet X-bomber: https://www.youtube.com/watch?v=szZisbEQB_Q Jayce and the wheeled warriors : https://www.youtube.com/watch?v=y9K0SzFIf4A The Mysterious Cities of Gold : https://www.youtube.com/watch?v=enoK-1CW74Y ================================== I took again in inspiration: ================================== - The front and landing feet of Glory of the Universe. - Sails and propulsion reactors of the Cephalus. - The front spur and the hexagonal solar sail at the top of the Solaris mast. - Part of the sails and the structure of the Azuris. ================================== Remarkable elements, NPU, conversion of parts, techniques : ================================== I converted parts #4346 and #4345, in all directions, with levers, for the machinery. Part #44938 bionicle shield, with a "mechanical" aspect converted into an energy capacitor. Various parts of Droids (starwars) converted in the machinery and on the outer deck. Bionicle Shield #45275 converted into deflectors, on the deck of the ship. Kind of like "Viking ship/longship" shields. Big Trident Bionicle #40339 = excellent for large boat emblems in general. I used a slope technique for the sides of the hull. For the rear canopy in the hull, I used a SNOT technique with part #30249. ================================== Physical information : ================================== - 7,082 parts for 854 lots. - 2 weeks of brainstorming, intellectual reflection or "total blank" ...: passive or empty work. - 3 to 4 weeks of active work. - 60.8 studs width, 101.8 studs length, 78.7 studs height. - 48.7 cm width, 81.5 cm length, 63 cm height. - 5.77 Kg. ================================== Global : ================================== All Futuron figures, including the green Lego City minifigure and the lesser known "Educational & Dacta" minifigures. 9 crew members, 3 teams of 3 watch members. ================================== Exterior/outside: ================================== - Solar sails with 3 intermediate lookouts. They can rotate a bit. - Futuron logo, in stickers, on the sails. - 2 radars at the top of the masts. - Long electromagnetic barrel at the front. - 2 small laser cannon turrets at the front. - 2 large turrets at the rear, pulsed radius. - Wings with stabilizers at the end. - 2 small rotating turrets under the wings. - 4 landing feet. - Various elements of machinery on the deck of the Boat. - 8 deflector shields on the sides (Bionicle shield converted). - 2 large propulsion reactors. - Cockpit. ================================== Wheelhouse: ================================== - 1 captain / watch officer seat. - 1 seat Transmission of orders to machines. - 1 navigation control seat. - 1 communication control seat. - 1 alarm control seat. - Walkie-talkies, fans, fire extinguishers, binoculars, cups, etc. ================================== Interior/inside hull of the ship : ================================== - Small storage room at the front, with a ladder to grab onto the deck of the solar ship. - 6 beds with drawers below. - WC / toilet. - Sonic shower. - Kitchen / Cantina: sink, water, oven, cupboards, cups, bottles of food. - Table, bottles of food. - Machine room: control bar, control panel, turbines, fans, transformer, energy condenser, energy pressurizer, cooling circuit, heat transfer fluid, warning lights, ladder to climb to the cockpit, tool kit, tools behind the ladder. - Rear canopy - SAS by energy barrier. ================================== Conclusion: ================================== I built in a perspective of pseudo-realism, pseudo-likely and pseudo-consistency, with compromises with the Retro concept of the animated ones of the years 70-90's. I wanted something playable and fun at the same time. I had a lot of difficulty and trial and error, because I had never done a Lego boat. I worked several times until 4am ! I often work like this: as long as the inspiration is there, I must not lose it, and I work until I no longer see the time passing. But the opposite has also happened to me several times: several times the symptom of the "blank sheet" for 1 to 3 days, without knowing how I was going to build, find inspiration, think about the logic of the construction, etc. . This feeling of "emptiness", that you feel something is happening, and you have it on the tip of your tongue, but it does not come out! Annoying and horrifying sensation ! :) The inclination of the walls gave me intellectual problems. It took a long time to build the engine room. I had to redo it at least 3-4 times. I wanted a maximum of diversity and complexity at the same time. The confined space of the hull gave me difficulties: how to integrate "likely" elements in so little volume ? I have lost my hair several times. Just those damn shower and toilet, I had to spend 3 hours each, to do, undo and redo in all the sauces. Like a little monkey who tests all combinations. Shouldn't bring me a banana at this time, because I think I would have been screwed to make a monkey cry as a bonus .... lol [Futuron] Retro Space Solar Ship by Horlack, on Flickr (Zoom on Flick, picture Full-HD 9216 x 4608 pixels) [Futuron] Retro Space Solar Ship by Horlack, sur Flickr (Zoom on Flick, picture Full-HD 9216 x 6144 pixels) [Futuron] Retro Space Solar Ship by Horlack, sur Flickr (Zoom on Flick, picture Full-HD 9216 x 4608 pixels) Shiptember 2021 [Futuron] Retro Space Solar Ship by Horlack, on Flickr ================================== Source / reference on my project (progression in the time) : ================================== https://forum.brickpirate.net/viewtopic.php?f=31&t=25577 https://www.flickr.com/photos/horlack/albums/72157720062770130 https://www.facebook.com/media/set/?vanity=HorlackBricks&set=a.495422262040159
-
Interstellar was one of my favorite films from the past five years. After I first saw it, I tried to build the Ranger spacecraft, but was stumped by all the shallow angles and gave up. I finally returned to it this summer and managed to finish it up. It's not perfect but it swooshes quite well, so I'm happy with it. Those aren't mountains by Tembets, on Flickr One of the things I did differently on my second attempt was to mask the windows in with stickers (the front ones are masked in over a 1x6x5 panel and a pair of 1x4x3 window) because at minifigure scale there was just no way for me to capture all the little angles in bricks in a way that I was happy with. This also freed up some space to work on the shaping around the fuselage. Ranger by Tembets, on Flickr In the film, the front landing gear extends out from under the winglets at an angle. I managed to more or less capture this with a bar supported by a droid arm that can fold down to land, or up and under the winglets for flight. The rear hatch can swing down, and there is a second set of sliding doors that isolate the cabin from the outside. Ranger by Tembets, on Flickr Figures from left to right: Cooper, Brand, Romilly, Doyle, TARS, Mann. I didn't have access to Illustrator or anything at the time, so I ended up making all the stickers in powerpoint Endurance by Tembets, on Flickr And as a little bonus, I made the Endurance spacecraft as well as part of a short video I did of this MOC (below). The Ranger is also posted to LEGO Ideas if you are interested, thanks for checking my MOC out!
-
Benny's Classic Space models - spaceships, robots, and buildings!
Murdoch17 posted a topic in LEGO Sci-Fi
(When the base and any other digital creations are built in real life, I will add those pictures into this page.) This is the beginning of a journey through the wormhole to a mini-figure called Benny and a civilization on the cusp of greatness. His continuing mission: to seek out new lifeforms, to explore unknown worlds, all in the name of of science and awesomeness. The year is 1980-something, the name of the theme is Classic Space. Classic Space fortress walls The base as it was ordered... will post a picture of the complete setup when built in real life. Here is the front gate of my space base to let the train (or road vehicles) through. It can safely open and close still using the HoG (Hand of God) method without impacting the flow of 9v current (still need to add those 9v tracks..) through the rails... though I wouldn't suggest driving through it with the door closed! This is one of twelve walls sections, held together with the other modules by four Technic pins.(two on each side) This is one of four of the corner modules. I redesigned these since last time to be less parts intensive and have fewer gaps in the wall. Astro Bot Recharge / Repair bay The inspiration behind this large robot-recharge port model is mainly inspired by the mech repair bay from 2006 set 7709. (Sentai Fortress) from Exo Force. I can attach the robot to a small mound behind each foot, where it holds it there by two studs per heel. The dark gray thin sidewall pieces located on three sides of the foot make sure Astro Bot 33 won't wiggle side-to-side and disengage from his charge port prematurely. The wall supports the mech repair bay and also gives me another two brand-new wall sections (in length) in for the base to play with at the same time! Classic Space HQ / Benny's skyscraper - 76038 MOD This building was inspired by my brother's take on set 6398, Central Precinct HQ. He added a back staircase module (which I have removed in favor of an older 2015 Avengers tower-inspired model / MOC I made a couple weeks back), while I removed the prison cell and changed the color scheme from white and black to blue and white with trans-yellow glass. The windows and doors were also modernized, and the large spinning sensor array added to the roof. I've also added connectors to the main base walls, which means the building is fully integrated into my Classic Space base. As previously stated, the rear was inspired by set 76038, Attack on Avengers Tower, from the Age of Ultron movie. This ultimately meant that the 1990's-style model's floors had to be stretched upwards by two bricks each in height to match the newer model's floor-plan. I really like the sleek wraparound window on the top floor of the building, as it is where personal Benny's office is. He gets to look out on the space base, and marvel at how things have changed since his creation in 1984. The right side wall opens up to reveal the inside of the building. Ground floor is official meeting space, second and third floors are for monitoring the radio telescope and other such devices across the galaxy. Fourth floor is the break room, while the fifth floor is Benny's personal office. (Note: On the outdoor patio on floor three is the monument to Jens Nygaard, the gone-but-not-forgotten creator of Classic Space.) The rear tower folds open for access too, and like the side wall, locks shut on a Technic pin. Here you can also see Benny's desk. Lunar Crater Crawler vehicle This model is based off 60192 (Arctic Ice Crawler) from the 2018 CITY Arctic theme, this MOD is called the Lunar Crater Crawler and moves boulders with it's larger gripping claw tool. It can seat one fully-suited astronaut figure. It also has printed controls in front of the space seat. Floodlights sit on the sides of the craft, allowing you to see on the dark side of the moon, while there is a clip for a handheld radio should you need to contact the command base. The rear should feature the Classic Space logo on a 4x2 slope, while a bumblebee stripe printed 1 x 2 tile goes above the logo. This printed pieces will be applied in real life once it's built. Lunar Armored Marauder hover-transporter The new set 75311 (Imperial Armored Marauder) has been transformed into a Classic Space version, complete with revised forward-facing side guns. All the hatches still open, but I couldn't use space seats inside this one, but there are plenty (four per vessel) of 2x2 modified tiles with just enough room for air-tanks in the model... at least I hope that will be the case! The rear of the Marauder. I just need to buy two copies of my digital file as shown, as that's at least $15 total cheaper than buying two sets and recoloring them after the fact. Any thoughts on this MOD? Classic 1950's Moonraker automobile Inspired by this recent @hachiroku build here, I have completed this new early 1950's car for Benny, who seems pretty happy with it. Looks pretty classy, right? The two doors open, but the obligatory black space seat is missing, because any more height and Benny would not fit inside. The rear has a license plate, the classic space logo, and two coverings partially obscuring the rear wheels. The roof is held on by four studs, and is as such removable. As a courtesy to the driver instead of the space seat, I have included a light bluish gray upholstery for the back of the seat. Classic 1980's Security Forces Jeep (x2) This model was heavily inspired by set 75916: Dilophosaurus Ambush from the first series of Jurassic World sets. I have turned that jeep into a Classic Space vehicle by subtracting most of the features and adding the CS logo to this piece on the trunk and a space seat for the driver. This CS version has a trans-yellow windscreen and a revised roll-cage. The rear of the vehicle has a spare tire, license plate and tail-pipe while the roll-cage folds back to allow for you to place the driver in the seat. Cosmic Explorer This is a heavily modified set 70816 (Benny's Spaceship, Spaceship, SPACESHIP!) to features a new canopy from set 75176 (Resistance Transport pod) for the front windscreen, plus a rear turret that elevates and rotates in lieu of the radar dish and repair robots. To match the new canopy, the crew quarters were enlarged and opening roof remade, but the wings still fold out via the same Technic mechanism as in the original set 70816. More recently, I added a new nose to the ship inspired by DC comics set 76028. (Darkseid Invasion) The rear of the ship features the three main engines. The sensor array that was once near here was replaced by a four-barrel repeating laser turret that can rotate a full 360 degrees and elevate to 180 degrees, allowing for cover fire in almost any direction. The wings fold out if the center engine is pushed inwards, ready for the foam-tipped missiles to be engaged and aimed at any Blacktron III enemies... I did remove those yellow missiles, as they were too touchy and could fire accidentally. The main canopy has been heavily modified to allow for crew to go between the engineering and navigation sections without having to exit the ship. The Unikitty-seat area was replaced with a opening canopy for the engineering and fire-control crew to see outside from their stations near the Imagination Reactor. Deep Space Fighters These ships are deep space fighters of the Galaxy-class. Each seat one figure and have enhanced hyper-drive making it nearly as fast as LL-929. (Benny's spaceship) This ship was designed to be a heavily-armed fighter, and features an enclosed cockpit allowing for long distance travel such as from system to system if in an emergency. The rear of each of the two ship's features two engines made up of four smaller rockets. Here is the cockpit, which can seat 1 pilot figure per ship. Interstellar Frigate I really like this ship and have since I first saw it, I just had to wait for the instructions for set 75293 (Resistance IT-S Transport from Star Wars) to come out to make sure it could be built in real bricks with the changes I had in mind. (which were quite a lot!) I'm so glad I chose to do it in LDD first before just buying random bricks, as it required SO many modifications to the design (including an actual windscreen and extended cargo bay!) and changing other colors, that I would have been completely lost just swapping parts out at random. The eight engines are attached in a completely different way to the set design, as 2 x 4 bricks with three Technic holes going straight down don't exist in LDD. This new design was the only suitable way to get them to work on the ship in a very tight space. Also, I added double raised fins to the rear of the ship, for that extra retro '80's space flair. The cargo bay is quite spacious for troops or freight as it has been elongated by four studs from the set's original length. (You can see it is loaded with five yellow space-crates above) The roof of the cargo bay comes off, while the landing ramps fold up / down for loading or unloading of cargo / security personnel. The front of the ship has a space seat for a single pilot with two large laser forward-facing cannons. The pilot's cabin also features actual controls and a real front windscreen. (unlike the stickers and tiles in the original set!) The cockpit roof folds away, just as it did in the original set, which you can partially see here. K8-E the robot dog - Benny's best friend After meeting the Doctor (Who?) and his K-9 (pronounced Canine) unit, Benny decided he wanted a pet. So he bought himself a retired space police bot named K8-E (it's pronounced Katy) who helps Benny with his maintaining his SPACESHIP! and home base of the fleet. The two robot dogs eventually teamed up to sabotage a Blacktron and Dalek peace treaty from being signed, thus keeping the Universe safe from their plans for conquest for the moment. K8-E even took a laser shot from the Blacktron secondary leader, saving K-9 from being killed in the midst of them leaving the self-destructing Dalek ship. When reunited with Benny and the Doctor a short while later, the robot dog was fixed up and given the nod of approval from the Doctor, and a happy farewell from K-9, who left with the Doctor in the TARDIS to go to parts unknown looking for the Daleks fleeing from their loss at the hands of K8-E & K-9. From then on, K8-E has been keeping Benny company while awaiting the return of K-9 and the Doctor. K8-E is actually modified from set 8399 (K-9 Bot), which is a 2009 Space Police III set. Astro-Bot 33 - Classic Space's Giant Robot You may ask yourself: "Why would the Classic Space fleet want a giant robot?" The answer is a simple one: "Who in their right mind wouldn't want a giant freaking robot!?!?!" This Classic Space version of Build Better Bricks' Iron Giant with the head of the previous @hachiroku version of the model's head added on. (consider it a mashup of the two Iron Giant models!) I made it into CS colors (black, light / dark grays and blue) with red and green light parts, and two yellow / black bumblebee stripe tiles. The rear of the robot. The 4 x 2 slopes on the arms are supposed to have this print. The mouth now can open to allow for posing... but unfortunately, it doesn't play nice with the shoulders, so the mouth must remain closed until I can figure out a better solution. Another thing that didn't work well was the rotating waist: it operated too jerkily and was hard to operate, so I removed that feature. Conveyex Crawler-Transporter This is a heavily modified Classic Space version of 2018 Star Wars set 75217 (Imperial Conveyex Transport). It's length has been doubled and the visible weapons have been removed, to make more room for passengers. Behind the trans-yellow glass of the former cargo-cars are seats, so that workers can get to Benny's space base without driving in themselves. (Call it a commuter light-railroad system, without the "rail" part!) The vehicle can be shortened or lengthened in modular sections depending on the needs of the specific mission, but in this particular case it has two crawler engine units, and two cargo hauler segments that can easily detach for maintenance or to drop more segments in / out. On each of the engine units is the dual drivers compartments, located on either side of the tread behind the square openings. Each car seat four figures, meaning the whole train hauls eight people (+ their air-tanks!). ....and yes, two of the handles on the doors are upside-down in all the pictures. Classic Space figures These are all my Classic Space figures. The thirteen green figures are the soldiers of the group, while while the six red suited people are scientists. The three blue figures are Benny (in helmet), Penelope (with pigtails), and Unikitty who are the officers of the group. The two other figures, (the red android and the robo-dog) are T-3PO, who serves as the translator to other species and computer systems, while the robo-dog is K8-E who happens to be Benny's personal pet / security guard. The astronauts you see here are the famous "Lost Six". These half-dozen brave souls were with Benny in 1988 when the space station they were on was ambushed by Blacktron I forces and blasted into a black hole. Benny managed to escape the station before it entered the gravity field, but only just in the nick of time. (He could not reach his ship mates due to a computer error with the hatch systems.) Benny's suit was damaged in the escape, and he still wears it like that to this day as a reminder of his failure to get his crew off in time. This is the last picture of the Lost Six, with Benny out of frame because he took the picture. (He was supposed to be in the picture, but he forgot to set the timer on that take.) Will we ever see these brave men and women again? Only time will tell! Meet AstroKitty (in blue) and PuppyNaut (in white)! I've had AstroKitty built like this since 2014 when I got Benny's Spaceship (x3) from the original LEGO Movie line. I had to find a novel solution to the head-falling-off problem. (double the body width and pretend it's a bigger spacesuit) I was very sad to see Lego never released a blue one of the upside-down 1 x 3 tile parts with hole used in the newer Unikitty! sets seen around 2018 to correct this error. I did, however, note the new arrival of Puppycorn, Unikitty's energetic younger brother from the TV show and was disappointed to see he never had a Classic Space variant, besides the "Alien" version. (which I don't count as actually being Puppycorn.) So, in short, I made one from his Dalmatian costume, made to be double wide like AstroKitty. Sadly, there is no Classic Space logo on Puppynaut, as there is on Astrokitty. (This drives my OCD nuts!) ...oh, and they have headlamps on both their helmets, to provide light in dark environments and a convenient hole for the unicorn horn to fit into. I have used what was left of the word astronaut as originally worded by LEGO, as in ASTRO goes with KITTY; so thus PUPPY gets hitched to NAUT. Thus, we get PUPPYNAUT to describe him. EDITED 5/21/21 added some newer models to the post. As usual, Comments, questions and complaints are always welcome! -
Hello there. Ever since I saw the movie Interstellar, I fell in love with it and now it's currently my favourite movie of all time. Back in November after watching the movie in theatre, I scoured the internet for a Lego version of it and I found Posh_hammer's (https://ideas.lego.com/projects/85221). Being so inspired by it, I decided to make it my own. First making it on LDD (http://puu.sh/gTN2Y/a628731dea.jpg), then fast forward 5 months and multiple bricklink purchases, I put it all together. It wasn't all easy of course, lots of structural problems I did not anticipate but at the end of the day, it is finally something I can call my own and I wanted to share with you guys. Enjoy. https://www.flickr.c...06/16962127002/ The Endurance - Interstellar by HwangMiHee1, on Flickr
