Search the Community
Showing results for tags 'fighter'.
Found 78 results
-
Minifig scale replica of one of the first flying wing aircraft powered by jet engines constructed in 1945. It is modeled after the V3 of the aircraft, the only version of the aircraft that still exists today (on display at the Smithsonian). The MOC features fully retractable landing gear and a dual colour scheme. The biggest challenge was trying to get all the angles and shapes as true to the original as possible because there isn't that much source material out there on the web. The original pilot would have worn a pressure suit but sadly Lego hasn't released one of that kind yet so I used the next best thing I could find. If you're interested in getting the instructions for this moc feel free to contact me at brickster.creations@gmail.com Lego Horten HO 229 by legomanijak, on Flickr Lego Horten HO 229 by legomanijak, on Flickr Lego Horten HO 229 by legomanijak, on Flickr Lego Horten HO 229 by legomanijak, on Flickr Lego Horten HO 229 by legomanijak, on Flickr Lego Horten HO 229 by legomanijak, on Flickr
-
ISD Steadfast Hangar, 3 ABY by Nicholas Goodman, on Flickr ISD Steadfast Hangar, 3 ABY by Nicholas Goodman, on Flickr ISD Steadfast Hangar, 3 ABY by Nicholas Goodman, on Flickr
-
This MOC is my take on an Incom Corporation vehicle. It is meant to be a vehicle that exists in the star wars universe, a custom fighter craft used by the Rebellion during the galactic civil war, but just never was shown on screen. It mainly uses parts from 75218 (X-Wing) but also uses parts from 75211 (TIE Fighter) and a few pieces from a few other sets. It features Full hyperdrive capabilities, powerful weapons, light shields, and it is speedy as hell, thanks to it's almost oversized engines, but one of it's few disadvantages is that it cannot have an astromech and so can only hold a few hyperdrive coordinates at a time. It can hold one minifigure pilot comfortably, meant to be a generic rebel pilot, and has functional landing gear. The pictures are too large to upload here sadly, but you can check it out here, as well as get free instructions for it. Please note the rendered studio models do not have the stickers that were used in the actual model. I hope everyone enjoys one of my older, earlier mocs, which is still one of my best
-
I was wondering if anyone has managed to combine 9493 and 75102 into one kind of "super x-wing". I tried but it fell apart.
-
Hi! Today I'd like to show you what I consider my best work up to date and also my first take on a fighter aircraft. I chose F-4 Phantom because of its legendary status and cold war era origins, which is also the theme of most of my other models. Phantom with crew by [Maks], on Flickr https://www.instagram.com/p/CPYZopgJ69d/ https://www.instagram.com/p/CO8BhjFJybL/ https://www.instagram.com/p/CO257j3pgDr/ F-4J Phantom II (5) by [Maks], on Flickr This particular Phantom is in VF-84 'Jolly Rogers' squadron, one of the most famous US Navy units. It's distinguishing feature is the big scull logo on the tail fin. Phantom was one of the biggest and heaviest fighters of its era, especially when compared to 'tiny' MiGs 19 and 21. F-4J Phantom II (17) by [Maks], on Flickr F-4J Phantom II (13) by [Maks], on Flickr It's 1:40 scaled and approx. 48 cm long. F-4J Phantom II (16) by [Maks], on Flickr Flickr Gallery Cheers guys!
-
Hi everyone, I've buid some Space MOC's the last few weeks. This is something I came up with after seeing some parts. I wanted to experiment with some colors and this is what came out of it. The big macaroni tiles was something I wanted to use in a speeder. I wanted to use some rare colors for speeders. Bright Light Orange and Medium Azure are colors I don't use very often. This was a nice opportunity to use these colors. I found some small technic panels. In Space Police III those panels are used in the vehicles. That gave me an idea for this build. For more pictures please look into my Flickr album. Feedback is appreciated.
-
Hello, I'm trying to build a TIE/wi Whisper for Rebrickable but I can't quite figure out the brick stacking method. Can someone please help me? Thanks!
-
Hi! A long time ago I watched episode 7 of The Mandalorian series, where appeared ... OUTLAND TIE FIGHTER I immediately added it to my "to do list" After a long time and many other MOCs, the time has come for TIE - for the Empire! I was building the project for a few weeks - it was not easy because I decided to use a new 3x3 round corner in it. I wanted to do something different, there are so many TIE projects already, it's hard to come up with something new. Project contains 914 parts. This is the Outland version - it has foldable wings. There are a few good mechanisms, I improved it, TJ Lego Room showed it some time ago. I added technic liftarms, changed a few other things. Landing gears is an additional stand - I didn't want to install it permanently in the cabin. This would worsen its appearance and weaken the structure. More on my youtube, link below. Project is also available on Rebrickable here: https://rebrickable.com/mocs/MOC-72054/EDGE OF BRICKS/outland-tie/#details
-
A simple fighter. f1 by Nom Carver, en Flickr f10 by Nom Carver, en Flickr f6 by Nom Carver, en Flickr f5 by Nom Carver, en Flickr
-
Hi, I made this mini MOC using invisible thread for magic (almost invisible, thinner than human hair) and magnetic levitation platform, hope you like it. Same technique:
-
[MOC] Blacktron Mobile Outpost Transporter and Heavy Fighter 1
sander1992 posted a topic in LEGO Sci-Fi
Hi everyone, I don't think I have shared this with you earlier, but I've been busy with some Blacktron ships. Last year I've build the Blacktron Mobile Outpost Transporter. I have just finished my Blacktron Heavy Fighter 1. The modules from both ships can be combined. For more pictures look into my Flickr album. -
Hello all! This is my first attempt at a UCS style MOC. I've been wanting to redo all my playset Star Wars sets, so I decided to start with the TIE Fighter, and I am really happy with the results. If you want to get the instructions, I posted them on ReBrickable for download. Here is the model from the front and back: And here it is with my other UCS sets: For those who are interested, here is some of the earlier versions of the model. First, this is what I dubbed the fat TIE. Then, the wings got slimmed down. At this point they were still plates instead of bricks. This was the last iteration before I built the physical model. It looks a lot like the final version, but it could not support its own weight, so the cockpit and arms were completely changed.
-
Hi everyone, This is build for the contest on LowLUG: Recreate a set. I wanted to build a new version of the Star Hawk II of the Unitron. For more pictures, please look into my Flickr album.
-
Hey all, I don't know if this MOC is technical enough to be posted on the Eurobricks forums, but I wanted to share with you my current build of the first starfighter MOC I built after coming out of my dark age. It is designed to be a multi-role starfighter, equipped as both a heavy reconnaissance and strike fighter. The Stormdrake is outfitted with three powerful magnetically thrust vectored fusion drive arrays, heavy shields with numerous emitter vanes, a host of sensors and scanners including an advanced reconnaissance imaging and analysis suite, plus a high-gain sub-space radio antenna located on the aft ventral side of the ship. The fighter is armed with four particle beam-lance cannons as well as six plasma-burrowing thermonuclear anti-capital ship missiles. On a build note, the more I worked on this MOC, the more it took on a vaguely draconic appearance, especially the landing struts. A bit of fantasy whimsy in an otherwise sci-fi setting. The inspiration for this MOC came from designing a main hull similar to the Liberty Patriot light fighter from Freelancer alongside wings that vaguely resemble the Vagyr assault craft and lance fighters from Homeworld 2. The role/classification of this starfighter was also inspired by the modern-day combat roles of the F/A-18F Super Hornet. Anyway, thanks for checking this MOC out and let me know what you think!
-
Over six months ago I posted this starfighter, which won Best Medium Space MOC at Brickfair VA 2019, and received some really good advice for improving the build. For the Mk. II build, I worked on the colour blocking as to differentiate primary hull paneling (red) from more delicate "technical" areas (black and some bits of dark bley). I also improved the cockpit layout as well as trying to make the weapon/engine pods look more modular. There are some additional changes to the space-frame itself, especially to the internal scaffolding for better structural integrity. Overall, this is far closer to the vision I had for the design of the original Asterion. This MOC was going to be attending Brickfair VA 2020; however, since said LEGO expo was cancelled for understandable reasons I am posting the MOC here instead! Let me know what you all think! More photos on this MOC's Flickr page!
-
Features: 2 x 8mm MG 4 x 20mm Cannon Canopy slides back to open Throttle lever Cockpit accepts a minifig pilot Naviagation lamps (red, green, white) Retractable landing gear National insignia built in bricks; no stickers used Camouflage painting applied on all sides using bricks Engine can be separated for inspection
-
Hi all, This is a German jet fighter in WW2. Features: - 4 x 30mm cannon barrels visible on the nose - National insignia made in bricks; no stickers used - Canopy opens backwards - Accepts a minifig pilot - Retractable landing gear - Navigation lamps (red, green, white) - Fuselage can be broken into 2 parts - A transparent support is required when the gears are extended because the tail is heavier than the nose. In the real fighter the nose would be way heavier because of the cannons and the engines, but my model is all ABS plastic so the weight difference cannot be put into practice.
-
This is my own creation of a Sopwith Camel F.1 biplane fighter aircraft. You can download the instructions for this MOC from my Rebrickable post here: https://rebrickable.com/mocs/MOC-43722/BrickHugger171/sopwith-camel/?inventory=1#comments
-
Hi all, The model is Messerschmitt Bf109, the most numerous German fighter in WW2, if not the most famous. I designed it from scratch and did not take features from other creators' work. I spent about 7 years designing and financing this project, and I finally finished it last year. Thanks to the work-from-home policy I don't have to drive as much, and I have more free time to share my creations with the world. You will see that some parts are in the new bluish grey while some parts are in the old grey. There are different patterns of 1x2 jumpers. A few parts even show cracks. This is the testament to the time spent to build this up, so I decided not to replace them with new parts in perfect condition. The 1x2x3 train door pieces and the 1x1 round plate with tow ball don't come in the new light bluish gray anyway. The building technique I used to make the aerodynamic fuselage is similar to the 3D wooden puzzle made out of interlocking thin boards. You can see the vertical and horizontal layers coming together to form a pixelated curvature. The width of the fuselage starts in 4 studs and reduces to 3 studs, then 2 studs, squeezing all the way to 1 stud. The internal connection is achieved with technic pieces, locking hinges and clips. I use it a LOT in my models because it allows you to add complicated painting schemes to the surface while maintaining the correct form and structural integrity. Notice that I still try to use as much slope/wedge/curved pieces as possible. Features: - 2 x 20mm cannons mounted on wings - 2 x 8mm MG on top of the engine (represented by a pair of black 1x4 hinge pieces) - 20mm cannon mounted coaxial with the propeller axle - Ammunition stowage (accepts any 1x2 tile as ammo belt) - Skeleton canopy opens/closes like the real thing - Cockpit has enough space to accept a pilot wearing an aviator helmet and a life jacket (new small type) - Throttle lever tilts back and forth - Instrument panel represented by 2 hollow studs in black - Service doors on wings - Landing gear retracts completely into the wings (VERY sturdy as well!) - Tail gear may be steered - Navigation lamps. (red, green, white) It's an homage to the tradition of Lego's airport sets that always had navigation lamps on the commercial airliners. - Engine cowl opens for inspection; exhaust pipes and ignition system visible - Behind the engine you can see the turbocharger intake and a hole for the hand crank - Fuel tank cap can be opened - Both wings may be detached for towing on road - Fuselage separates into 4 major components (to swap/combine painting schemes easily) - National insignia is made out of bricks; no stickers used. Designed to be visible from all sides. - A jettisonable fuel tank may be attached to the bottom I have posted a video on YouTube so that you can see the moving parts: Pictures: (The wings may look very fragile because they are hanging on the 1x2 locking hinge pieces, but there's another pair of clips inside the fuselage that connect to the top side of the wings. The wings are actually so strong that you can lift the whole thing by the tip of a wing. Details explained in the video.)
-
The Messerschmitt Me 262 was the world's first operational jet-powered fighter aircraft. A historical documentary I saw on TV inspired me to build this aircraft in particular. It features retractable landing gear and just enough space to fit a minifig head inside the cockpit. The main colour of the fighter is Dark bluish gray while the underside of the plane is mostly done in Light bluish gray. Lego Messerschmitt Me 262 by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr In order to retract the landing gear a small hatch has to be removed first and afterwards the landing gear has been retracted the hatch can be returned to it's position. by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr by legomanijak, on Flickr
-
Hello again, Eurobricks Sci-Fi community! Here is the other of the two new starfighter MOCs I've built in the past few months. This and the Quetzalcoatl were both created from parts leftover from upgrades on two of my larger starfighters (the Asterion and the Fenix) hence their red and black colour schemes. When I get the time, I'll make sure to post some of my other (not red and black) starfighters which I have built. Again, apologies for the mediocre photos, hope you enjoy, and let me know what you all think! Thanks! Some fun fluff info: TFA-18 Anansi -Pilot: Taylor Justice Williams, callsign "Quads" -Classification: Scout/Light Interceptor -Manufacturer: Terran Federation Astronautica -Operator: Terran Federation Navy -Propulsion: 1 Sanderson Engineering fusion torch array with electro-magnetic thrust vectoring and acceleration, 2 Böhrs light gravimetric drive maneuvering units, manuvering microthrusters -Powerplant: Böhrs IL-4 short range combat craft H-3 fusion core -FTL: None -Primary Armament: 2 Hershel, Kiesel, and Rhône particle beam-lance cannons -Secondary Armament: None -Defense: TFN Class-3 duranium hull-plating laced with kinetic energy capacitor circuitry, LizBeth Industries “Rollotor” regenerative EM deflector field generator -Detection & Communication: Böhrs "Vision" Mk. sub-space sensor suite with standard weaponry targeting laser and EM-spectrum optics array, basic sub-space radio -Landing Gear: 4 externally mounted folding landing struts integrated with exterior hull plating
-
Hey all! Here's one of two new starfighter MOCs that I've built in the last few months. Apologies again, however, for the mediocre photos. Hope you all enjoy, and tell me what you think! Some fun fluff info: ME-416 Quetzalcoatl -Pilot: Yolanda Nuñez, callsign "Viper" -Classification: Fast Attack/Interceptor -Manufacturer: Mécanique Du Elwinsen -Operator: Terran Federation Navy -Propulsion: 3 Sanderson Engineering fusion torch arrays with electro-magnetic thrust vectoring and acceleration, 3 secondary FT arrays, manuvering microthrusters -Powerplant: Böhrs IL-4 short range combat craft H-3 fusion core -FTL: None -Primary Armament: 2 Hershel, Kiesel, and Rhône extended range particle beam-lance cannons -Secondary Armament: None -Defense: TFN Class-4 duranium hull-plating laced with kinetic energy capacitor circuitry, LizBeth Industries “Rollotor” regenerative EM deflector field generator -Detection & Communication: Böhrs "Vision" Mk. 5 sub-space sensor suite with standard weaponry targeting laser and EM-spectrum optics array, basic sub-space radio -Landing Gear: 4 externally mounted folding landing struts integrated with exterior hull plating
-
Hi! Design of my new MOC is ready! This is my first MOC from Clone Wars! Darth Maul's Gauntlet Fighter Main functions: - 735 pieces, - 1 minifigures - Darth Maul from Star Wars Rebels - a lot of details PDF Instructions - read description on my YouTube movie or check on Rebrickable! What do you think? More on my Youtube, link below! Also available on Rebrickable: https://rebrickable.com/mocs/MOC-32053/EDGE OF BRICKS/mauls-gauntlet-fighter/#comments
-
Mandalorian bounty hunter star ship (The Gauntlet) 9525 MOD
Murdoch17 posted a topic in LEGO Star Wars
The Gauntlet was a Kom'rk-class fighter/transport owned by the former Mandalorian splinter-faction leader turned bounty hunter Pre Vizsla. Designed and constructed by the Mandalorian starship manufacturing corporation, MandalMotors, the Gauntlet took its name from the Basic language translation of the Mando'a word, Kom'rk. Equipped with powerful engines and twin laser cannons, Gauntlet fulfilled dual roles as a troop transport and starfighter, and was maintained by Vizsla— former leader of the Mandalorian splinter-group known as the Death Watch—as his personal transport during the galaxy-spanning Clone Wars. It was later owned by his son, who used it in bounty hunting during the Galactic Civil War era. The Gauntlet was a Kom'rk-class fighter/transport, and like the smaller models of the Kom'rk-class, measured 52.3 meters in length. Gauntlet possessed broad, angular, rotating wings the rotated to an upright landing position when grounded. The starship was also equipped with dual, forward-facing laser cannons located at the nose of the main body, and powerful engines that made Gauntlet one of the fastest troop transports in the galaxy. (not canon) owner info: After being proclaimed dead (Pre Vizsla faked his death at the hands of Darth Maul), and losing his title of leader of Death Watch to the Sith lord, Pre Vizsla escaped Mandalore on his ship, the Gauntlet. He fled to parts unknown, and had his ship repainted into a rusted colors of browns, grays, and black. Pre Vizsla held out for the rest of the Clone Wars on the desert world of Tatooine, hiding his ship in the bustling space-port of Mos Esiley at Docking Bay 93. It was around this time he found himself a wife, one of the refugees from the further out in the Outer Rim sieges. Her name has never been recorded as she died in child birth, but their son has: Par Vizsla. Around the time of rise of the Empire, the father went into business of bounty hunting, and Pre made sure to teach his son the importance of their shared Mandalorian heritage. When Pre died of old age around 3 years Before the Battle of Yavin ( or 3-BBY for short), Par Vizsla took his father's ship and armor and began bounty hunting full-time. He took this profession as a sort of challenge against Boba Fett, the "top dog" of the bounty hunting world, and another Mandalorian-armor wearing hunter. Their rivalry would go on for some time, until Boba was "accidentally" eaten by the Sarlacc. Par Vizsla then had to fight off several new threats to his "top Mandalorian" status, until finally being lost in the deep core chasing a bounty and was then termed MIA around the time of the Battle for Jakku.... though what truly happened to him and his ship will never fully be known. After all, he was chasing the Millennium Falcon! The cockpit seats two figures, one pilot / owner, and one bounty in handcuffs. The cargo area folds up, (and down) and can store a single crate. The ship, while landed, has the two side arms fold upwards 90 degrees. Builders notes: This model is a color-changed and slightly modified version of set 9525 (Pre Vizsla's Mandalorian Fighter). I liked the model, but not the color scheme, so I changed it to match one of the figures in the new Mandalorian battle pack (set 75267), who is going to pilot this ship. I removed the ability for the ship's cockpit to turn 90 degrees sideways while flying as I didn't like how it looked. The landing function still operates as intended, though. The story I wrote that goes with this model is 100% my own fan fiction. It has been inspired by the Clone Wars TV show and other bits of info from the Star Wars Wikipedia about various topics. Most (but not all) of the ship's info is straight from the Gauntlet's page on that wiki. (This model should be built in real life next year, hopefully by mid-March.) -
Small fighter initially developed by Axos for Yaegers during Xion Wars, with some of the wrecked spacecraft rebuilt and modified by the Terra Confederation. Presented version was developed for Yaeger 03. Technical specifications: Power core - Zirum Crystal based, based off leftover Aeromi technology adapted to human tech. While Axos used exclusively stabilised crystals in all tech, the Terra Confederation used artificially enhanced crystals in their modified fighters. Engines - 3 thrusters capable of propelling the Viper to a (factory limited) max speed of 200000 km/s in space. forward-facing thrusters are used for braking. Weaponry - wide range of customisation depending on Yaeger. 03's version had 4 swappable fuselage-mounted barrel guns and 2 swappable wing cannons as well as missiles. Refractor and shield-breakers were installed along with un-disclosed tech. Lore over (for now). This model was an accident most of it's development - it started out during the dissasembly of "Bugeye" , when the 3D panels were placed back to back. The fiting placement of bionicle chestplate as rear part of tail was a pleasant surprise. The Technic looks are missing Technic functionality (only cabin is openable, the main thruster does not rotate for VTOL mode...) but not too shabby in the end. Photos (folder not yet public, but miniatures below can be enlarged)
