Search the Community
Showing results for tags 'ferry'.
Found 8 results
-
[MOC] Lake Champlain Horse Ferry (Working Replica)
elfprince13 posted a topic in LEGO Historic Themes
Historical Info Horse-powered ferries (also called "team boats") are a unique form of transportation popular in the United States in first half of the 19th century. The most sophisticated version, invented in 1819 by Barnabas Langdon, mounts a treadwheel just below the deck, which is geared to a pair of paddle wheels. Slots in the deck along two teams of horses to be hitched, facing opposite directions, and maintain a steady forward gait powers the boat. A wreck was discovered in Lake Champlain's Burlington Bay in 1983 and remains the only archaeologically studied example of a turntable horse ferry in the world. More information about this unique piece of transportation history, including how to safely visit the wreck, can be found through the Lake Champlain Maritime Museum. About the Model The model is geared to allow a Technic motor to power the treadwheel + paddlewheels, and makes the horses trot inverse-kinematically, as demo'd here: A look at the full ferry: A cutaway showing the internal gearing: Some more shots from minifig-POVs: -
I´m happy to present you my newest model, a not exact copy of the ferries on lake Balaton in Hungary. Hope you like it! As I was a small kid we often spent our summer near Balaton. If someone is younger than 6 and lives normally in a small village, it is really impressive to see cars which drive onto a ship and after that they come down on the other side. That´s why it was always a highlight for me to visit and sometimes travel by this ferry. Still nowadays if I´m there I wait the ferry once coming and going away. It´s still the same ferry as 25 years ago, I still find it really cool and it brings back the old memories. It took 9 months from the idea to the final MOC. The building process included some really cool challenges and was one of the most exciting developing projects in my entire MOC-life. The idea was to build a remote controlled ferry which can swim and drive on real water, can catch the coast reliably and my older tiny RC models (Milka truck and Flixbus) have to be able to drive up and down. The last requirement was to make it possible to show the whole setup on exhibitions. At first I searched on the internet for the biggest one-piece plastic box and ordered one of them. It was difficult because most of the big boxes has small bottom wholes to let water out. I needed exactly the opposite of it. Keeping water in the box. The measures of the box decided the measures of the model. On the beginning I tried to experiment with some LEGO boat hulls. The facts that these hulls are not completely closed and the ship is without vehicles already very heavy brought me to the solution to use empty bottles. They are the most reliable things to keep air in and protect the electric parts, like Sbrick from the water. Of course you can say I could put everything to a higher position, not integrated into the deck. But no, if everything would be in the building, everything would be on one side and the ferry would be completely unbalanced. On this side everything would be under water. What I could do was to integrate the motors on the other side into the deck. It was also not enough. I needed counterweights. At first some LEGO keels, but they were not heavy enough (they contain air, too :/). So at the end I used simply some pieces of steel. The real ferry has Voith Schneider propellers. We know that it´s possible to recreate it with LEGO bricks, but not at this small size. And he depth of the box is only 15 cm. That level of reality was also not the goal of the project. The draught of the loaded ferry had to be less than 15 cm, so I decided to use 4 propellers. Of course the available propellers of LEGO are like disasters, if we examine their functionality. If they are not, they are too big. So I built my own version out of Technic pieces. The propulsion uses two channels of the Sbrick, one for each side. You can turn with the ferry that way. I thought you don’t need this feature in this thin box, which is only 10 cm wider, than the ferry. But I was not right. You really need to do turning maneuvers to keep the ferry parallel with the walls. And yes, I hope I will have the chance to drive the ferry in a bigger pool in the future! Next challenge was to catch the coast stable enough for the buses and trucks. Maybe I said earlier that the ferry is everything else than horizontal. The counterweights are good, but not good enough. The proportion of the weights of the vehicles and the real ferry are also different than at the LEGO word. So the LEGO ferry has extremely strong reactions, if the vehicles come. The real ferry has also water tanks to balance itself. The LEGO ferry doesn´t have such a help. So I decided to build the ramp so that it can take part in bringing the ferry into a better position at least near the coast. There is a hook on the ramp (see in the video). It catches the panels of the coast and don´t let the ferry go away. After that it goes down a bit more and forces the whole ferry to raise itself a bit. The coast is horizontal, so this force brings the ferry also closer to the right horizontal position. That is nice, but as the vehicles arrive, it changes. That´s why I had to develop a correct order, position and driving path for the vehicles, too. These small vehicles are not off-roaders. If you can´t follow the instructions, the vehicles stuck on the ramp. But if you do everything well, it works smooth! The most difficult one of the nonfunctional problems was to create the meeting of the deck and the curved walls without gaps. I used for it 1x2x2 panels. The deck goes actually into the wall (under the top of the panels). But the upper end of these panels is not equal high with a whole number of plates, so I had to sink the wall on the sides with a half plate. I did it by using different wholes on the Technic frame, as for the deck. 1 Technic whole is 2,5 plates, so using neighboring wholes gives us the 0,5 plate difference. The ferry had its first appearance on Bricks4Family 2021. It worked surprisingly well during the weekend. After the box was completely horizontal and the exact level of the water was also found. By catching the coast the visitors often thought, it´s enough to turn off the propellers and open the ramp. What they (and I on the beginning) didn´t realise was the fact that if the ferry drives, the water goes in the other direction under it. If the propellers stop, the water brings the ferry slowly back. One method is the perfect timing with opening the ramp. Other method is to keep the propellers on and opening the ramp at the same time. After Bricks4Family I made a few very small changes on the ferry, so on the second exhibition (Ilmbricks 2021) worked everything even better. I put for example a door on the side, so it was possible to switch on and off the battery box, without removing the captain´s deck, the life boat and the whole roof. The deck has also 4 invisible, but removable panels. If they are removed, I can hold the ferry by holding the really strong Technic frame. Now there are small Technic bricks in them. It became much easier to remove the panels with the help of a small bar or an axle. If you really read all of these, a huge thank you for it! Hope you liked the ferry! You can find the pictures in high res in my Photostream! PS.: The next exhibition where I plan to show the ferry is Bricks am Meer 2022 in Bad Zwischenahn, Germany. Hope we can meet there!
-
Hello, I'd like to present one of my first attempts at a digital MOC made using Studio. How far digital building software has come since the days of LDD! It's a ferry, built in the Classic Town style using a retro pallette. It is crewed by 1 minifigure, and can be boarded from both ends by 4-wide vehicles. It can transport 2 vehicles at a time (based on 6633 Family Car), as well as approx. 4 passengers on the walkways and 2 bicycles. I based the design on this Playmobil set from a few years ago. I've never collected Playmobil but I saw a review of this set on JANGBrick's channel and thought it was quite good. Here is the ferry, docked at a small pier, unloading 6633 Family Car. And here it is, on its own. I hope you enjoyed looking at this model. It's been a long time since I've posted on Eurobricks, but I've never stopped looking at all the wonderful creations ~ A.S.
-
This mod is provided with opening (and locking!) doors, removable roof for the Captain / crew, and space for the number of the ship featured on the doors' exposed studs. (Unfortunately the printed tiles required are not available in LDD) I also added some height to the walls to keep the imaginary water (as the boat does NOT really float) out. ,and I extended the bridge's length by about double it's original amount of studs to make it a little less cramped. This ferry allows for three and 1/2 space of track, which isn't much, but is more than my original inspiration for this MOD, set 343 from 1968's blue track 4.5v era. Also, it uses up two of the annoying flex tracks! The doors open and shut, and with the included Technic pins (hidden in the pictures) allows for it to stay shut. The roof of the cabin comes off, allowing for access to the inside of the bridge. The loco seen is NOT included in the LDD file, but is merely to show off the 3 1/2 tracks worth of space for the placement of rail cars / engines. The LDD file is available here, if you want it. As usual, comments, questions, and complaints are always welcome!
-
This is basically a stock CITY set (specifically set number 60119, "Ferry") The catch is it features about 27 more parts which make the ship look a lot better. I added some height to the walls to keep the imaginary water (as the boat does NOT really float) out and extended the bridge's length by two studs to make it a little less cramped, and Ii even put in a seat for the Captain. The additional wall height makes the loading ramps a bit more in tune to the rest of boat, as they now line up nicely with the walls when folded up. These are all the parts needed to modify set 60119 to be more sea worthy with the higher walls and extended bridge. Here is the original model to compare mine to. (image taken from BrickLink) I hope you like my model, you can make the modifications yourself, courtesy of this handy LDD file: http://www.moc-pages...1465332822m.lxf NOTE: The stock parts are grouped separately in the LDD file, while the remaining pieces are the extras. Comments, Questions and complaints are always welcome!
-
Ready for an incredible journey on the Mississippi aboard the vessel "Mississippi Princess"? The paddlewheel steamboat has 4 bridges: -The lowest includes sessions for passengers, a sofa and the engine room with the 10-cylinder diesel engine 20000HP -The first deck includes 1 suite, 1 double, 1 twin bedroom, 1 shared bathroom and the emergency room and service. All cabins have windows with portholes. The bathroom has a toilet, sink and shower. The second deck is home to the central control of the funnels and the terrace He sees the presence of a service area equipped with 2 high power LED headlamp for lighting at night and "the BELL ". The last deck on the other hand has a small rooftop and the cockpit. The control center is equipped with radar, sonar and computer. The vessel is equipped with two drawbridges for the boarding and alighting of passengers, both controlled by articulating arms and driven by pulleys. In navigation access to drawbridges it is controlled by gates. The paddlewheel is equipped with 8 blades for pushing. I published this project on LEGO Ideas, where you can find more detailed picts.<p>I used LDD to build and Bluerender for rendering. I hope you like it <span style="color: #76787A"><span style="font-family: arial, helvetica, sans-serif"><span style="color: #222222">
-
Ferry (2) by Luis Baixinho, on Flickr When the first pics of the 60119 Ferry appeard, I was willing to make an improved version. The idea was to use also the ferry of a near town (Caminha, north of Portugal - google pics) as a source of inspiration, mainly in the color scheme and overall shape. Ferry (3) by Luis Baixinho, on Flickr The main objective was to give it a toy aspect, with playability possibilities and a good sturdy. More pics here.
-
I've had this up on flickr for a while, but haven't posted it to EB. This is inspired by the old wooden ferry boats that used to ply Sydney's inner harbour when I was a kid. My father was a harbour ferry master for a while, so I practically had the run of the whole ferry from the wheelhouse to the mess (not the engine room unescorted) from about age 7 to 10. My favourites were the few old small wooden ferries like the Caribee and the Karingal that were still operational in the early 80s.
