Search the Community
Showing results for tags 'clone wars'.
Found 101 results
-
Hey so I'm building a Kashyyyk MOC and I need some help with the tree. Can I have sort of idea on going about this.
-
[MOC] Minifig Scale Delta-7B Aethersprite-class Light Interceptor
IcarusBuilds posted a topic in LEGO Star Wars
So a few years back I set out to make my first Star Wars MOC (as an adult that is). I was really into The Clone Wars and decided to start with something small. I finally decided on the Delta-7B, as it was featured heavily in the series. And I had a bigger goal that I was aiming for, that it would be a part of. This was my first minifig scaled MOC, long before my Ghost, Phantom, etc. Though I've had these sitting on my desk for years, it wasn't until recently that a few new pieces came out that finally added the finishing touches to them. So I've finally decided to show them off, in lieu of the bigger thing I'll be showing in the "hopefully" near future. So lets just jump into it. Anakin and Ahsoka's Delta-7Bs. Delta-7B (1) Delta-7B (2) Closer look at Anakin's. Anakin's Delta-7B (1) Anakin's Delta-7B (4) Closer look at Ahsoka's. Ahsoka's Delta-7B (1) Ahsoka's Delta-7B (4) I also designed Hyperdrive Ring's for them. But haven't built either yet. Anakin's Hyperdrive Ring (1) Ahsoka Hyperdrive Ring (1) And just for a size comparison, with my Phantom. Delta-7B (4) by IcarusBuilds, on Flickr Hope you enjoy. IcarusBuilds -
Ive been working on a stop motion lego movie since last years august, which heavily features this republic clone base. This is my first ever attempt at a clone base, using no brick linked ordered pieces, instead only using pieces from my own brick collection and my destroyed (2008) deathstar. These were taken 5 months ago, and i cant take any more pictures of the base because i destroyed it when i finished filming all of its scenes. The turret is an old moc of mine of the "75088 senate commando battlepack" turret.
-
I had built this solely for use in one of my Ring-worlds (Link to that topic blow) But I felt it was a build in its own right too so I decided to create a separate thread (hope that's okay?) Anyway, this was a fairly quick build because it was one of those rear moments where everything just.. fits you know? The only part I really had trouble with was connecting the two half's together.. And then of course remembering what I'd done in order to make a second one! Let me know what you think and any suggested improvements are especially welcome! AT-TE / Teaser by Inthert, on Flickr And now, as promised, the link to my Ring-worlds project:
-
Three years ago, I bought a large amount of the exclusively new "Kashyyyk battle pack" sets. Agreed by everyone, the primary reason for these sets were the highly detailed Scout trooper, whilst lurking in the background, remained the non-cannon Kashyyyk clone trooper. Although, the value for the ordinary troop barely suffices over £5, there was a rather stranger peculiar misprint, which was briefly spotted 2 days prior construction. This misprint, annoyingly encouraged me to discard the misprint, however with conversations with Lego, a replacement was offered. Fortunately, I still have this misprinted helmet piece, where the front facing detail is reversed, meaning that the front helmet is plain, olive green, whilst the detailing is behind. Anyone have any clue, on the value behind this misprint? Please find the image attached below. Kind regards, http://imgur.com/a/rCEsW
-
Hope everyone is having a nice Sunday, I finally managed to upload a new video depicting Delta Squads Mission to Devaron to retrieve the dead bodies of two jedi who were slaughtered by Savage Opress at the Temple of Eden Hope everyone enjoys watching as much as I enjoyed building this.
-
[MOC][WIP][LDD] Minifig Scale Clone Wars BTL-B Y-Wing Starfighter
IcarusBuilds posted a topic in LEGO Star Wars
Hey everyone, So I recently started re-watching Clone Wars since I finally got it on BluRay, and thought I'd take a stab at some of the ships since Clone Wars was the first series I started making MOCs for. (One day I may show my earlier stuff once I update it all.) I had forgotten how neat the Republic Y-Wing was, and thought I'd tackle that. I had planned to show this off as real bricks but it's going to cost a bit more than I had originally anticipated, so here is the LDD version for now. Anakin's BTL-B Y-Wing Starfighter (1) by IcarusBuilds, on Flickr Version with landing gear, there is unfortunately no room to fold it in, so it has to be removed and bricks placed over the holes. Anakin's BTL-B Y-Wing Starfighter (2) by IcarusBuilds, on Flickr They had the design drawings available on the Star Wars website, so I used those to get my design as close as I could scale wise. Anakin's BTL-B Y-Wing Starfighter - Full (1) by IcarusBuilds, on Flickr And then a collection of the different colours seen in the show. BTL-B Y-Wing Starfighter - All Colours (1) by IcarusBuilds, on Flickr BTL-B Y-Wing Starfighter - All Colours (2) by IcarusBuilds, on Flickr BTL-B Y-Wing Starfighter - All Colours (3) by IcarusBuilds, on Flickr As a side note, there is enough room to fit Anakin and Ahsoka in the cockpit, I tried to fit a clone, but the helmet is just way to big to fit under the canopy. Also I am aware that these do contain some pieces that do not currently come in the shown colours. Anyways, let me know what you think, and enjoy. -
I am currently working on a Ghost MOC from Star Wars Rebels. I'm basing the design of DarthTwoShedsJackson's Ghost. I really dislike the original Lego set because its too small and has no interior. I'm making it UCS scaled and it would really help if anyone could give me some advice.
-
Hi everyone, today we have a MOC on a rarely seen planet when it comes to both Star Wars Lore and Lego. This MOC takes place during the final hours of the clone wars and was more of a MOC where I could test some building techniques. Any constructive criticism and a rating would be appreciated. Thanks
-
Please leave a rating and any constructive criticism in the comments. thanks.
-
Wow, first real post here! This is my modification of TLG's 75042 Droid Gunship, in an attempt to make it more film-accurate. List of Modifications: - removed play features such as dropping bombs and spring launchers - slimmed down light laser cannons on winglets - changed main laser cannon to add articulation and increase accuracy - added additional pieces to front to cover gaps between ball turrets and nose - added more accurate payload on underside of disc - removed cockpit hinge, filled details appropriately Here's a view of the whole thing. Off to the side, you can see the original cockpit section, which can be easily installed As a little bonus, you can open it to reveal the HMP's Droid Brain! In canon, nearly all of the Confederacy's space and ground "vehicles" were actually independently-controlled droids. However, many games portray them as vehicles with onboard pilots, so you can easily remove the droid brain, as it is only attached via the front two studs. Above is a close-up of the droid brain. The image below shows the improved payload of missiles. Let me know what you think! I'm planning to make more accurate versions of other ships as well, so let me know what you'd like to see next!
-
Hello Eurobricks! I present to you my first ever topic and my first everMOC! I tried to create something simple to ease my way into the world of MOCs. Being a lover of clone wars i thought this was a good place to start. The build turned out to be very challenging, especially since I was using LDD, but i'm happy with the result. The basic ring design is inspired by Swan Dutchman's Jedi Interceptor and Booster Ring. The Interceptor is LEGO's own release. The rest is of original design. It comes to about 1300 pieces including the fighter, so I don't plan on building this in real bricks. Any criticism or otherwise is welcome, thank you for viewing! Jamie
-
feedback would be nice
-
To celebrate the release of Rogue One: A Star Wars Story today, I decided to build a 786-piece model of the ARC-170 Starfighter. While it does not actually appear in the movie, it was the Republic's precursor to the iconic X-Wing Starfighter that the Rebel Alliance used in their fleet. It includes three clone pilots and an R4-D5 astromech droid. I used 8088 as a skeleton, but did some major modifications as I will detail throughout the post. Here you can see the model as a whole. At first glance you may not see that much different from 8088 (apart from the engines), but I altered many minor aesthetic and functional components of the ship to make it more accurate and give better play features. The original model had 396 pieces. I almost doubled the part count of the original. Here's a front view. One of my main priorities with this model was to bring the s-foils in closer to the main wing. In the movie, they're flush against it when closed, but 8088 had an unsightly gap between everything. This was as close as I was able to get the s-foils to the main wings. In this side view you can see some of the tapering I attempted to do near the nose. I wanted the dark red to flush better with the stripe that goes back towards the cockpit. You can also see my addition of spring-loaded missiles to the main guns, of which there are also faux blaster tips to try to mask some of the spring missiles' prominence. I also tried to extend part of the underbelly to better connect with the nose as seen on the movie model. Nothing too much back here. Just a knob that when turned opens and closes the s-foils, similar to 8088, however pulling and pushing it operates a different function... In 8088, pushing the knob activated a series of flick-fire missiles. Here, pulling it releases a latch that drops down this gun caddy which is currently holding the pilots's personal weapons. This is securely held in the ship so it doesn't fall out while swooshing. Top-down view. I changed the shaping of the wing-tips to make them more symmetrical as they should be. Here's my personal favorite enhancement. I modified the engines based on thire5's UCS ARC-170 model, but scaled down appropriately. It was a nightmare getting each tile to line up properly and not give me a collision error. I spent a good few hours or so on this part alone. They're slightly larger than the turbines on 8088, but I don't think they're oversized. The internal skeleton of the turbines for those wondering how I did it. If you have any comments or suggestions for how my model could be improved, please share! I'm always looking for constructive criticism! May the Force be with you!
-
Hey there everyone. This is a short video of A MOC depicting the days of the battle for Mandalore. Today we have the first part of a short 3 part series loosely based of the Ahsoka Novel. Hope you enjoy. Dont forget to like, comment and subscribe for more.
-
"Republic Troops are ambushed by Jabiimi Nationalists while attempting to clear a small village of Separatist forces." - Battle of Ryloth 22 BBY, Roughly 21 years before the battle of Yavin. Just realized I had a Eurobricks account, so I decided to post something. This is my mission 9.2 entry for the 253rd over on Flickr. Anyway, thanks for viewing!
-
Hello I recently purchased Captain Rex's AT-TE and it was a truly enjoyable build. The AT-TE has always been one of my favourite vehicles of the Prequel Trilogy, but Cap'n Rex's AT-TE really revitalised my interest and the mechanical Christmas beetles.. I love midi scale builds; I think its a scale that works really good with Lego (not to mention cost-effective), and so I have attempted my own midi-scale AT-TE. I know there have already been some incredible MOC midi AT-TEs, but I hope this brings something unique to the party. I think I might have to try and give it the Captain Rex treatment later on. Thanks for taking a look; criticism and suggestions are always welcome. Simon AT-TE - MIDI (10) by simon crocker, on Flickr AT-TE - MIDI (8) by simon crocker, on Flickr AT-TE - MIDI (7) by simon crocker, on Flickr A few more photos on flickr
-
The Jabiim Collaboration Hello everyone hope you've all been having a good weekend. For the last 5 weeks 5 builders have been collaborating to try and recreate areas and scenarios depicting the Star Wars Republic comic book series (the Jabiim story arc) here is a list of each episode Episode I: The Battle For Jabiim (by Marathon Productions) Episode II: Cobalt Station (by Innovative Brix) Episode III: The Battle Of Razor Coast (by Packer221) Episode IV: The Battle Of High Rock Canyon (by Alcloneproductions) Episode V: The Battle For Jabiim (Prison Break) (by Krisproductions) Here is a link to the playlist with each MOC: I hope you enjoyed the MOC series. please feel free to leave any criticism and any tips or creations you want to see in the future.
-
[LDD][MOC] Republic Standard & 501st Legion Clone AT-RT Walker (Minifigure-Scale)
LegoStarWarsLDDShop posted a topic in LEGO Star Wars
Regardless if he or she is ore is not a Star Wars fan, probably everyone has heard of the AT walkers by now. Starting with the AT-AT and the AT-ST, these constructions of terror would create a legacy of vehicles that would come to appear in nearly every corner of the Star Wars story. Eventually, with the debut of Revenge of the Sith, the Republic AT-RT walker was introduced into the Star Wars story. A small, yet maneuverable walker, the AT-RT proved to be a valuable Republic asset throughout the entirety of the Clone Wars. LEGO has made 4 renditions of the walker (5 if you count 30006-1, even though I don't), and some have paid great attention to detail, while others moreso to accuracy in size and shape. Personally, I think that the small version of the walker included in 8098 is the best to date. I set out to improve on that design. This version is based on the standard AT-RT, which first debuted in Revenge of the Sith and subsequently appeared in the Star Wars: The Clone Wars film, in addition to multiple episodes of the animated show. It features everything the walker from the TV series does...an open control seat, a place for the clone trooper's blaster, an adjustable frontal blaster, and adjustable legs. Furthermore, the best part is the model has an improved design and is built to match minifigure scale. This version is based on the 501st Legion AT-RT which first appeared in Season 4 Episode 7 of Star Wars: The Clone Wars. It features everything the standard walker design does as well, but it reflects the paint swap for the 501st Legion Clone Troopers. I am really impressed with how these designs turned out, and I hope you are too. MOCpages (Standard) MOCpages (501st Variant) Comments welcome. God bless. -
The Battle of Razor Coast, the 3rd installment of the Jabiim Collab series ----------------------------------------------------------------------------------------
-
[MOC] Cobalt Station, The Battle For Jabiim Collab Episode II
marathon_productions posted a topic in LEGO Star Wars
Ep2 of the collaboration series based off of the Star Wars:Republic Dark Horse comics! Other builders in the collab (Ep1) Marathon Productions (Ep2)Innovative Brix (Ep3)Packer221 (Ep4)Alcloneproductions (Ep5)Krisproductions -
Hey there everyone, i hope you enjoy the start of this collaboration series based on the Star Wars: Republic Dark Horse comics. This first season will feature Episodes from Innovative Brix, Packer221, Alcloneproductions and Krisproductions.
-
Is it too late for a Clone Wars related MOC? After many years of sitting in a box, waiting to be finished. I have finally completed my scale AT-TE. The story begins back in 2008 After getting the 7675 version, I decided to make it more movie accurate and minifig scale. I wanted to keep the color scheme the same of 7675. I started building December of 2008 with my first version.(seen in other folder). It was then in 2012, I had taken the challenge attempting to motorize the walker. It was an on and off project with many trials and tribulations. I found the project too difficult to complete, and got burned out by it. At that point I just wanted a scale AT-TE, I had then decided to re-haul the entire walker, starting from the ground up, using most of the original outer shell. This is what I believe to be an accurate representation of the walker. Model features opening troop doors, rotating cannon, accurate opening cockpit, posable legs, and a handle for carrying. I present to you my Scale AT-TE walker. http://www.moc-pages.com/moc.php/429975 https://www.flickr.com/photos/113021024@N05/ I hope you like the model, and as always feedback is appreciated!
-
Based on gas bag headed predators from the Techno Union homeworld of Skako, the Octuptarra Tri Droid was a successful weapon used by the Confederacy of Independent Systems throughout the galaxy during the Clone Wars. The only part of this MOC I didn't build is the head which is from the first Homing Spider Droid. Otherwise everything else is original. Size Comparison: Comments, suggestions, questions are all welcome! If you want to see this or more MOCs like it, please feel free to check out my flickr account.
-
Can Any one help me mod my 8098 Clone Turbo Tank (Clone Wars)
shrak posted a topic in LEGO Star Wars
So can any one give me some ideas of what I should do to modify my set. I would like to keep some what the way it is as it is modeled after the version seen in season 2 of star Wars the Clone Wars Holocron Heist. It would also be nice if they could be done medium to minimal requirement of pieces as I would be using the spare pieces I have already not going to go and buy new pieces just to mod it. Thanks to all who can help me!
