Search the Community

Small Dune Buggy - Lego Mini CLAAS XERION 42102 Alternative Build Free Building Instructions: https://play.google.com/store/apps/details?id=max.set42102.alternative.models Lego Mini CLAAS XERION 42102 Alternative Build - MOC - Small Dune Buggy (Free Building Instructions)

Toy Helicopter - Lego Mini CLAAS XERION 42102 Alternative Build Free Building Instructions: https://rebrickable.com/mocs/MOC-71747/makushima/toy-helicopter-42102 Lego Mini CLAAS XERION 42102 Alternative Build - MOC - Toy Helicopter (Free Building Instructions) by makushima Three-wheel Extended Version Lego Mini CLAAS XERION 42102 Alternative Build - MOC - Toy Helicopter (Free Building Instructions) by makushima

Windmill - 42102 Mini CLAAS XERION Alternative Build Free Building Instructions: https://rebrickable.com/mocs/MOC-69818/makushima/windmill-42102 Lego Mini CLAAS XERION 42102 Alternative Build - MOC - Windmill (Free Building Instructions) by makushima

Small Euro Truck - 42102 Mini CLAAS XERION Alternative Build Building Instructions: https://play.google.com/store/apps/details?id=max.set42102.alternative.models Lego Mini CLAAS XERION 42102 Alternative Build - MOC - Small Euro Truck (Building Instructions)

TC19 entry not finished, but I got those small tractor tyres, anf of course, I need to build that Class Xerion This is the size It is pretty small. 4x4 seems impossible. Maybe some 2 steering modes, but not shure. This is how it scales. It is already littlebit wider, but there is still almost no space for something. Finish in page two with more pics 29.01.2022. Added digital files. Engine is littlebit different, than in real model. IO file https://bricksafe.com/files/Jurss/classxerion_small/xerion_small.io but with baloon tires, as stud.io doesn't has small tractor tires LDD file https://bricksafe.com/files/Jurss/classxerion_small/xerion_small.lxf for lxf parts pack from [KEY TOPIC] LDD New Parts - LEGO Digital Designer and other digital tools - Eurobricks Forums could be needed

Only one model today :D For a long time I wanted to build a classic agricultural trailer. It was supposed to be a standard double axle version. However, when I built the New Holland and Fendt tractors, I changed my mind and decided to build a tandem trailer. I made such a decision for a simple reason. The only output that can be controlled in tractors is the PTO shaft. This version of the trailer does not have to have a pneumatic system or engine to raise the kiper. In addition, the model had to be in a popular color because I wanted to create an instruction for it. The choice fell on Krampe Big Body 550. Trailer frame The frame is a fairly simple liftarm structure. The first version had a pendular suspension, but I had to remove it because the loaded trailer was unstable. Thanks to this, I could additionally strengthen the frame and move the cylinder towards the hitch in order to increase the load capacity. At the moment, it is about 1 kilogram Tipper I wanted to build a realistic model. Because of that I had to give up technic panels. If I used them, the tipper would weigh 1/3 of its current weight. Bricks are heavy, so the payload has dropped. The model looks very good like model–team one. I am glad that I managed to reproduce the curvature of the sides. The tailgate lifts automatically when the tipper is lifting. The trailer has a system of pull rods that lift it up. If the tractor has a pneumatic system, it can be replace by lego pnaumatic cylinders as a separate function Thanks for reading! Build instructions can be found here: https://rebrickable.com/mocs/MOC-26566/M_longer/krampe-550-tipper-trailer/ VIDEO:

Hi all, After months of work I'm almost done designing a hay rake for the Class Xerion, with one design decision left for which I just can't make up my mind. Opinions are welcome. The rake arms on the left are more symetric but shorter. The arms on the right have alternating lengths, but overall more amplitude.

Hi With my first post on eurobrickst I’d like to show my Claas Xerion 5000 track VC MOC (although it is more than one year old). Some Ideas are taken from the original Claas (steering system) and efferman (position and type of motors). The goal was to implement as many realistic functions as possible – for example a 3-point linkage system and hood with auto-lock function. Motorized functions XL Motor for propulsion (4 wheel driving) Servo-Motor for steering (with a linking system similar to the one in the original Claas) L-Motor for linkage system (hoist up / down) L-Motor for rear PTO (clockwise) and hydraulic pump (against clockwise) – one motor drives two functions depending on direction of rotation The motorized functions are powered by one sbrick in combination with a standard battery box (under the hood). Pneumatic functions Motorized pump is connected to a hydraulic connection at front and rear to support attachments with hydraulic power (and a valve to switch between front and rear) Manual functions 3 steering modes (4-wheel-steering, front-wheel-steering, crab-steering) with manual switch (similar as in the original Claas) Openable hood with auto-lock system - meaning you can lift the tractor by the hood 180° rotatable cabin (rotatable by a small black gear) Easy-accessible power-on-of-switch (as in the original Claas) Switch to change between front and rear linkage system (small gearbox) Other functions Pendular front axle (with soft suspension springs for stabilization) 3-point linkage system at front and rear with auto-lock connection (front: 1 mini LA, rear: 2 mini LA) which is quite robust LED-lights on hood and cabin (2 pairs) Trailer hitch (tow ball at rear) Attachments beside the 3-point linkage system (front / rear) and the trailer hitch you can add weight on top of the rear wheels or you can add a gooseneck connection with working driveshaft I already built a snow plow and a snow blower which I will portrait soon The functions work well as long as the resistance is not to strong. Pictures [edit: new upload, bigger preview size] Video Severin

Hi everyone, finally took some pics of my Xerion. Its kind-of finished, but could do with some cleaning up here and there. Anyway, here's what i have so far..! 4 Wheel drive (Motorised RC) 3 Diff locks, all using the orange wave selector and all manual. Track width is about 1L to wide, but to get the drive, steering and diff lock in, plus have the tyres not foul the chassis when turning, its the best compromise. 2 steering modes - both the steering and the mode selector are motorised and RC. Rear axle has two steering racks, small LA slide the pinion axle to engage the 'other' rack to give standard 4 wheel steering and crab. Rotating cab using a modified version of 42054 - was motorised, but changed the layout of a few bits, not yet reconnected it. Bonnet is a lengthened 42054 but mounted at a different angle. Rear 3 point linkage, motorised and RC. Very similar to the one i had on the Axion. Dimensions are: 130mm tyres, Overall length 46cm, height 24cm and wheelbase is 22cm Not sure if i'm going develop it much further... i get kinda bored after a while and take things apart to start something new. (case IH Stieger or Magnum Row trac maybe...) I'm always poor and embedding and sharing pics, so at some point in the next 10 mins i'll get the flickr album link added plus a couple of pics. Hopefully. https://flic.kr/s/aHskPKa6M1 20190101_131359 by Team Thrifty, on Flickr 20190101_131337 by Team Thrifty, on Flickr 20190101_131638 by Team Thrifty, on Flickr Here's one next to 42082 for scale.. (and also some of my building environment) 20190101_134917 by Team Thrifty, on Flickr

Hello Over the past couple of months I have been enjoying building 42054 - what a great little set. Once I'd finished it, I wet about MODing the appearance somewhat, and have ended up with two different set-ups. Descriptions and photos below (hopefully the pics aren't too big, but apologies in advance to the mods if I've messed it up yet again...) Configuration 1 - 8-wheels with stock silage plough & cosmetic modifications Apart from the obvious addition of four extra wheels, I also modified the bodywork as follows: - Altered wheel hubs (apologies, I can't remember who did this white/red mod to the Claas wheels originally, think there's videos on Youtube but if that person is a member EB then thanks to you.) - More rounded fenders/mudguards, both front and back. - Exhaust with chrome parts and decals. - Windscreen wiper to deal with any flying 'muck' - see Configuration 2 below... - Chrome filler cap. - Additional spotlights at the front. - Slight change to roof detail including aerial/additional red hazard lights to rear. - Improved step ladder. - Additional warning decals at front. So, nothing very revolutionary or technically interesting, but I enjoyed making the changes and personally I think the mudguards look better than the stock versions. I did build the crane first but didn't like how bulky it was compared to the tractor, so I ended up with the stock 'B model' () silage plough. I took it outside for some photos: Configuration 2 - 4-wheels with slurry tank trailer & cosmetic modifications I then removed the plough and the extra wheels, and set about creating my first-ever MOC. I was inspired, first generally by the amazing work on 42054 of @BrickbyBrickTechnic, and secondly by one of these - single-axle slurry tank trailers: My tank includes: - Dual slurry pipes and sprayers, for the sprayin' of that muck. - Third wheel for stabilisation when disconnected from tractor (can be released by partly pulling out the axle with stop & red bush). - Custom decals. - Fake on/off switch for slurry pump. - Full set of hazard notices and warning lights, plus chains on the hitch. - Black cover can be easily slid back by removing a couple of securing axles. For when it's time to blast-clean the old muck, before re-filling with fresh muck. I absolutely acknowledge that my MOC is only an approximation of the above, rather than a replica (in particular, using the available spare pieces at my disposal, I wasn't able to recreate the cylindrical shape of the tank). It also doesn't use particularly great building techniques and hasn't got decent functions. However my aim was to create something for my Claas to tow that looked quite nice, and also to complete my first ever actual proper MOC (one previous failed attempt notwithstanding). By these criteria, I achieved something of which I'm happy. I'd love to hear your opinions, but I realise that it isn't up to much, so no worries if you don't have an opinion on any of this, one way or the other.... I also added some headlight effects, again influenced by @BrickbyBrickTechnic's past work on the Claas:

Hey all, here is something I've been working on. Its a mini Claas Xerion, black edition. Length, width and height are about half the size of set 42054. It started with an idea for turning the cab, as I want to put almost the same systeem in my bigger Xerion. (It isn't complete as I'm missing a few parts.) Building the steering systeem to get 4 wheel steering has taken the most time. Turning of the cabin. I'm also building an implement for the Xerion, which I also want to build for the bigger Xerion. It's a slurry tank based on the Kaweco swan neck tridem. some more pics: http://bricksafe.com/pages/nick97/mini-claas-xerion# I hope you like it. Any comments are welcome

Hi! Finally, I present to you my dump trailer for Claas Xerion 5000 Trac VC, which I've built quite a long time ago and teased you with in this topic. My intention was to model a really cool looking trailer Krampe HP30 - a 3 axle offroad heavy haul trailer, which goes perfectly to Claas Xerion 5000 set. I didn't actually scale it, but scetches/blueprints on the official site were of good use. As you can see on the photo below, I made a fake front cylinder, which unfortunately doesn't exist in LEGO Technic, so I had to cheat and used a pulley system to lift this huge red bathtub. String drum located on the front of the trailer is rotated by rear PTO of the tractor. I used the fantastic Efferman's motorized remake, but an OOB 42054 model could run it too. The trailer is steered as well - BUT! - Shamefully, I've realized 1st and 3rd axle should be steered and not 2nd and 3rd like I built it. And that happened just an hour ago while editing the video! Oh well, I will have to put more effort in research next time Somehow, I missed the video explaining the steering part on YT. Steering is modelled by levers and works according to the angle between the tractor and the trailer. The 3rd axle has larger steering angle than the 2nd. As you can imagine, it has some play in it... All three axles are suspended (normal springs for 1st and 2nd axle, hard springs for the 3rd.) - I borrowed and altered axle designs from MB Arocs set. Tailgate raises automatically and is locked when the dumper is lowered. Here are some details, to make the trailer more juicy . ...and the underbelly - for those eager Technic fans, who can't do without . For the end, here's one with a little breeze and a video of course. I hope you enjoy it! You can find more photos here. Partlist and instructions here. Thank you for your attention and constructive criticism! Best regards, Miha

REVIEW - 42054 - CLAAS XERION 5000 TRAC VC INTRODUCTION First of all my apologies. Sorry it took so long for this review to be published. Sometimes there are other things in life that need attention. Next year I will try to keep July free for LEGO reviews With all the news about the 42056 - Porsche GT3 RS and the 42055 - Bucket Wheel Excavator, you would almost forget there are two other great sets coming up during the second half of 2016. One of which is the 42053 - Volvo EW160E, while the other is the 42054 - Claas Xerion 5000 Trac VC. Today we will be reviewing the latter. Like LEGO it seems that CLAAS also likes its name spelled with capitals, so from now on I will happily oblige. While I live in an area which is flooded by tractors and farm equipment, the CLAAS doesn't seem to be very popular in Holland, while CLAAS is a brand which originated in Germany, not too far away. I have never been a real fan of LEGO Technic farm equipment models. To be honest; I have skipped all of them. They just didn't look interesting enough. How different the CLAAS is. I'll just throw it out there...this is love af first sight. Sometimes the real model looks even better than in the pictures. If this is the case with the CLAAS, it's definitely one of the best looking models ever made. Usually you don't draw conclusions in the introduction, but I simply felt the need to address the feeling that I have when I look at this model. CLAAS being one of the biggest (if not THE biggest) manufacturers of combine harvesters, we might be treated with another CLAAS model in the future. So, not having bought a single farm equipment set, combined with my limited knowledge of real farm equipment, I had to invest some time to get acquainted with the CLAAS XERION 5000 TRAC VC. In case you are wondering what VC stands for, it's the designation for Variable Cab, meaning the cab can be rotated backwards, to facilitate driving backwards....or is it forward?! At CLAAS, VC stands for Variable Cab. The rotating cab is the most convenient reverse-drive system imaginable. At the press of a button, the entire cab moves from its central position to the rear-facing position above the rear axle in seconds. The controls rotate automatically with the cab, so all functions remain the same when operating in the rear position. For high driving comfort on the road, the cab is centrally positioned between the axles. In the silage clamp, on the field, in the forest or in the mountains, the XERION with the cab rotated over the rear axle becomes a user-friendly self-propelled machine with a unique view of the job in hand. If you are looking for more information, here's the Brochure and Technical data. Funny fact about this set is that it's simply addressed as one of the 2H 2016 sets, while with almost 2000 parts, it would definitely have qualified as a flagship a couple of years ago. This is a clear indication that the Technic product line has been evolving rapidly. I start to wonder how big this model actually is. Let's open the box and find out. SET INFORMATION Number: 42054 Title: Claas Xerion 5000 Trac VC Theme: Technic Released: 2016 Part Count: 1977 Box Weight: 2834 gr Box Dimensions: 58,0 cm x 37,2 cm x 9,8 cm Set Price (MSRP): € 159 Price per Part: € 0,080 Links: Brickset, Bricklink THE BOX Having the Porsche and BWE around almost makes you forget that this isn't the Prima Donna of 2016. The box doesn't help either, since it's quite a big lady. A few years ago it could have easily passed as a flagship set. As usual, the front shows a nice picture of the model. The right side indicates that this is a PF powered set, where the M-motor and PF Battery Box are included. Bottom right tells us the crane arm and cabin are motorized. At this point it's not exactly clear what the motorization entails, but I bet the backside of the box will show us more details. BACK The back of the box (click to enlarge) shows us that the boom of the crane can be raised and lowered using Power Functions, as well as rotating the crane. Also, the cabin can be rotated using Power Functions, which is obviously super cool! I'm really anxious to find out how this works. The lower left corner shows us the three steering modes of the CLAAS XERION. Yes, you heard it right, three steering modes! Just like the Porsche should have had The lower right corner shows a picture of the B-model, which is actually the same tractor, with a different attachment. The crane has been transformed into a silage plow. As you can see, the cabin (and thus controls) are facing a different direction than in the picture of the A-model. Like the Unimog I expect lots of modifications and attachments for this model! CONTENTS OF THE BOX The box contains the following items: 1x Sealed instruction manual and sticker sheet 11x Bags for step 1 4x Bags for step 2 1x Unsealed PF battery box 1x Sealed PF M motor 4x Red rims 4x Awesome new tires This is how it looks when you throw everything on one big pile. INSTRUCTION MANUAL AND STICKERS The instructions are provided in a square bound book, sealed in a bag with the stickers. I really like this way of packing the manual and stickers. Keeps both the book and sticker sheet unharmed. Below are detailed pictures of the book and sticker sheet. The latter contains lots of little stickers for switches and controls. This means the model will have lots of functions....yay! PF COMPONENTS A PF Battery Box and a sealed PF M-motor. RIMS AND TIRES Without a doubt the single most eye-catching elements when opening the box are the new tires! 11 BAGS FOR STEP 1 4 BAGS FOR STEP 2 HIGHLIGHTED PARTS Back by popular demand is the Highlighted parts section. For this set it's quite elaborate. Not because it contains loads of new parts, but it does contain quite a few new-ish parts in large numbers. This indicates that the designer used some of the new building techniques in this set. And there's something funny going on with the axles, so let's start with those. AXLES Red and Yellow axles have been introduced in most of the 1H 2016 sets. What's striking though, is that this contains axles in both the regular black and grey color, as well as the latest yellow and red versions. Here you can see that we get both the grey and yellow 5L and 7L axles. I have included only a single grey version to make my point. Actually there are 11 yellow and 5 grey 5L axles and 6 yellow and 15 grey 7L axles. Same goes for the red 4L and 8L axles, which have a black counterpart (also a single one included in the picture). This set contains 9 red and 4 black 4L axles and 2 red and 2 black 8L axles. Makes sense, right?! At this point I am really starting to wonder what the strategy behind the axle color distribution is. Is TLG getting rid of their old stock or is there a better explanation? Hopefully we will discover some logic, but I highly doubt it. On the left you can see the new (2016) 3L Axle with Stop and on the right you see the 2012 4L Axle with Center Stop. Inclusion of the latter is not so special, if it weren't for the quantity. A total of 12 are included, which is more than in any other set. And even a single 11L axle in yellow, which completes the uneven yellow axle family (3L, 5L, 7L, 9L and 11L). Fun fact; the 3L axle in yellow has been introduced in 2015 (in the LEGO Ideas Wall-e set) and has been used in quite a few 2016 sets, but not in any of the Technic sets. Same goes for the 9L axle, which has been used in three non-Technic sets. Adds another layer to the axle mystery. Let's talk Pins and Pin Connectors. 3L PIN WITH 1L/2L AXLE This set includes 20 3L Pin with 2L Axle from 2015 and a whopping 31 3L Pin with 1L Axle from 2014. AXLE/PIN WITH PIN HOLE If you are in need of Pin with Pin Hole from 2014, look no further. This set contains 49 of 'em. Yes that's right, 49!! And 14 of its axle counterpart Axle with Pin Hole from 2016. AXLE AND PIN CONNECTOR HUB WITH 2 AXLES This set also comes with 12 Axle and Pin Connector Hub with 2 Axles. Already introduced in 2012, but relatively new in black. 1L PIN CONNECTOR Introduced in 2015, received with some surprise from the community. Why do we need this 1L Pin Connector?! Well, there's 54 in this set so we are bound to find out why it's useful. H-FRAME (DOG BONE) In my review of the 42023 Construction Crew (one of my two first reviews) I introduced this part. The Liftarm 3 X 5 Perpendicular H-Shape Thick a.k.a. Dog Bone Frame or H-Frame. A compact versatile frame which appeared in quite a few sets but never in such quantities. This set contains 10 of them. CURVED PANEL The 3 x 6 x 3 Curved Panel was already available in blue and yellow and now it's also available in black. You only get a single one in this set though. TURNTABLES This new turntable was introduced in 2015 and it's the first time it appears twice in a single set. It's comprised of two parts, The Top and The Base. STEERING WHEEL HUB Introduced in the Porsche (only because it was available first) and now also available in the CLAAS. Two of them in the Porsche but if you like to build 4W steering this is the set for you. It contains 4 Steering Wheel Hub Holder with 2 Pin Holes and 2 Axle Holes. LIME GREEN IS THE NEW YELLOW A reasonably large selection of lime green parts. Not sure if it's visible in this picture but apparently lime green is the new yellow, when it comes to parts being identically colored. Variation in lime green is significant. This picture shows a detailed view of the color difference. It's clearly visible near the 2x1 plate. The connectors and liftarm do differ as well. Good news is that there are some new parts available in lime green: 1x Panel Fairing # 5 Long Smooth, Side A 1x Panel Fairing # 6 Long Smooth, Side B 1x Panel Fairing # 1 Long Smooth, Side A 1x Panel Fairing # 2 Long Smooth, Side B 2x 16L Soft Axle (Flex Axle DISHES This 6x6 Inverted Rader Dish isn't new, but it's the first time we see it in red. This picture also shows the reflection of the light bounced off the ceiling. RIMS The rims are your run of the mill 56mm D. x 34mm Technic Racing Rims, with the unique feature that, like the 6x6 Inverted Dishes, these come in red for the first time. TIRES Four brand new 107 x 44R Tractor Tires! PART LIST Here's the complete list of 1977 parts. THE TRACTOR The build consists of two phases, the tractor and the crane. Obviously we will start with building the tractor. Get your #1 bags, rims, tires and PF components....we are about to begin! We start by building the chassis. The back side of the chassis to be specific. You can already see part of the steering mode selector mechanism taking shape. REAR MOUNT The manually operated rear mount which will later be used to attach the crane (or other attachments). Manual operations include raising and lowering the attachment. There's a PTO (Power take-off) which will be connected to the PF motor, so it's not operated manually. Here you can see the rear mount attached to the chassis. The bottom view shows the PTO drive shaft. STEERING Since this tractor has 4 wheel steering, the rear axle also needs to be steerable. To accomplish that, the new wheel hubs are used. No rack and pinion yet?! Or no rack and pinion at all?! I was wondering why the blue Axle Pin is used in favor of a Pin without friction. Normally my best guess is that these parts are used in the B-model, which isn't the case for this model. The only possible thing I can imagine is that the friction is needed to prevent wobbling, and the axle end makes sure the steering is smoothly. Best of both worlds kind of thing. The yellow 1/2 bush limits the steering angle. A limited steering angle is something that's bothering me frequently in Technic models. So I tried to remove the bushes and replace the 3L axles with 2L axles. This does improve the steering angle. However, as you can see in the pictures below, there's a reason the steering angle is limited. The left tire is touching the chassis. We will need to work with the default setup. Which actually isn't that bad in the end. The following picture clearly explains why we need red 4L axles, while there are also black 4L axles in this set. Or does it? Clearly no rack and pinion steering. Instead there's a cleaver mechanism transforming rotational movement into linear movement and back into rotational movement again. The linkage on the red axles can be moved into three different positions for the three different steering modes. Here's a short video demonstrating the mechanism: A manually operated lever on the back sets the linkage in one of three positions, selecting the steering mode. Stickers are used to indicate the different modes. Another short video of the steering mechanism: The pictures below show the different steering modes, respectively: Crab steering Front wheel steering Four wheel steering The video below shows a demonstration of the different steering modes: The bottom view of the chassis: The video below shows the bottom view of the steering mechanism: BARMAN Of course this mechanism is no surprise at all, since our good friend Barman already figured it out ages ago. Obviously a variation of the setup, but the basic are definitely the same. Well done Barman! PTO In the picture below you can clearly see that the PTO runs from the front to the back. Even though this model doesn't have a powered front attachment, it's prepared to have one. Kudos to the designer for this feature! GEARBOX This gearbox is used to power the different functions. As you can see there are two Clutch Gears. One is for the PTO and the other one is for the cab rotation. Here's how the gearbox will be attached to the chassis. Switching the change over catch results in changing direction of the function. This is confirmed by looking at the left side of the gearbox, the "differential like setup". MOTORIZATION A Power Functions M-motor is used to power all the functions. Since there's no driving or steering involved, the M-motor is just fine! CHASSIS Picture below shows the chassis without the battery box, but with both front and rear mounts Here you can see a video of how the battery box switch works. This is a rather ingenious mechanism. CONTROL PANEL In the images below you can see why we need 54 1L Connectors. They might not be necessary, but I do like 'em. They are aesthetically pleasing and avoids having gaps in the model. Otherwise bushes would be used, which definitely don't look as good as the 1L Connectors. Here's a detailed view of the control panel on the side of the vehicle. One switch will turn the battery box on and off, while the other rotates the cabin back and forth. Here's the control panel attached to the vehicle. This surely is one of the best looking control panels I have seen. HOOD The lime green hood, combined with the white roof and red rims, is one of the most recognizable sections of the CLAAS. Unlike other hoods this isn't just a couple of panels and done. It's actually quite a big build. The front of the hoods actually needs a CLAAS stickers, which I forgot before taking pictures. The hoods can be lifted and held up with a support axle. Usually you will see the fake engine, but now there's a battery box. To be clear; there's no fake engine at all. Which is perfectly fine given the fact that the battery box is well hidden inside the model. Closing the hood results in this pretty picture. I am already starting to like the looks of this model. The build also gets more interesting along the way. In the beginning there's much going on without really making sense. Seems like a bit here and a bit there. Some constructions seem rather flimsy. However, the further you progress, the better the builds get, to a point where it's actually a great building experience. CABIN Here you can see the base of the cabin, which actually has a nice feature. When the cabin rotates a little wheel underneath lifts the cabin a stud or two. This results in the cabin freely rotating around its axle. When it has turned 180 degrees, it falls in place again. Here you can see the up and down mode of the base of the cabin. The finished cabin looks stunning!! The back of the cabin has some intricate details, like the fire extinguisher and the 50 km/h sign. In the cabin there a computer display showing the field. I think you can even fit a minifig on the chair. Here's a sequence of images demonstrating the rotation of the cabin. You can clearly see the raising and lowering of the cabin when it rotates. FINISHED TRACTOR After finishing the cabin, you end stage 1 and the tractor is finished. I can only come to this conclusion: Yes, it looks great in real life too! And great is an understatement. This is one of the best looking Technic models ever! I wasn't a big fan of lime green, but it just went up a couple of notches on my ladder. Especially in combination with white and red! I can't think of a single thing I don't like about the tractor. Even the battery box is nicely hidden inside the model, while it still can be easily switched on and off. Cabin rotation is how it's supposed to be and there's a front and back PTO. Simply amazing! OOPS! I missed two of the headlights. Thanks to Charlesw for pointing this out THE CRANE After the 1st stage, you enter the 2nd stage...building the crane! I have included a picture of the crane on my work desktop, instead of my photography desktop. Looking at the pictures, it appears that I have no OCD when it comes to arranging parts before the build. On the left side of the crane (where I already applied the stickers) you can see the controls for the crane. Two levers, both with an up and down mode. One of them will rotate the crane, while the other will raise and lower the boom. For all you photography enthusiasts; these two pictures are taken with f14 instead of f20, resulting in a sharp picture but slightly blurred (out of focus) background. This draws attention to the model, while still being able to figure out what's going on in the background. I used to shoot everything with f20, which would have resulted in an entirely focused picture. Three more images of the base of the crane. This time without the unnecessary cluttering with extra parts. FINISHED CRANE Lo and behold, the crane! First of all, I am not the biggest fan of cranes. Why not? Because they have a tendency not to work properly, especially the Pneumatic ones (apologies to the Pneumatic fanboys). Therefor it's worth to mention that I actually like this one. A decent design with functions that actually work. Admittedly the manual functions are not that great and maybe a bit flimsy, but that will always be the case when building in this scale. Most important are the two motorized functions, which work like a charm. The mechanism to attach the crane to the tractor is nifty too, although it can be a bit of a struggle to attach it to the PTO. This takes some practice. FINISHED MODEL Meet the CLAAS XERION 5000 TRAC VC! I have said it before and I will say it again; this is one good looking model. The shapes, the design, combined with the CLAAS color scheme makes it really stand out. Admittedly, the crane doesn't improve the looks of the model. Being an attachment, I don't really mind. The nose of the CLAAS looks so cool. Especially with the weights on the front attachment and those new tires. I really love this picture. Another think I absolutely love is the cabin of the model. All kinds of small details and the overall look is stunning. The crane is....well.....a crane. It's not ugly, nor is it a beauty. Technically it's working properly, which is the most important thing. It does kind of bend over a bit, but it doesn't bend the chassis. It's caused by the way it's mounted to the rear attachment. Raising the attachment will straighten the crane a bit. The rear attachment is quite solid, which is good thing. The outriggers need to used for extra stability. This side view show what I mean by the crane leaning over. The rear view of the entire model. I love the fire extinguisher and the 50 km/h sign! Another front view of the model. LEFT OVER PARTS Quite a few 1L Connectors left. Makes you wonder whether I skipped a few. Or they are used in the B-model. FEATURES AND FUNCTIONS So the model looks good. Does it function properly?! And what exactly are the functions?! After the last building step, the manual shows four pages with functions! The first two pages concentrate on operating the crane and cabin, using the PF functions. The other two pages focus on the different steering modes. Let's take a look at the video to see these functions in action: The front attachment is manually operated and can be raised and lowered. Attaching to the chassis is easy, so it can be easily changed for another attachment. There's a front PTO, which leaves you with loads of options. I'm sure we will see some nice MODs being published in the future. Rotating the cab is quite fun to do. It works as expected and the automatic raising and lowering of the cabin adds coolness to the operation. Thumbs up for the rotating cab Then there's the three mode steering. Basically the steering modes work fine. The mechanism is very clever. So it all good? Well, there are some minor issues. Turning the steering gear needs quite a bit of force, which can result in accidentaly turning the cabin instead of steering. Another issue is the significant amount of slack in the steering mechanism. New wheel hubs were introduced this year, but they are no improvement in terms of slack. This model is best steering when driving it. This will reduce the amount of force on the steering linkage and it will also diminish the slack. All in all the steering modes work properly and the entire steering mechanism is awesome. This makes up for the lack of rear wheel steering in the Porsche! Like I said earlier; usually I am not a big fan of cranes. However, this one works properly. The motorized functions have been implemented very well. They are easy to operate, without confusion about which function does what. The manual functions work as expected, nothing special. I haven't paid much attention to the tires so far. I reckon they deserve a review of their own. Enough has been said about them already, so I will simply echo what other have been saying; they are awesome! Best tire since the Unimog tires. They have enough grip for Truck Trial. One thing I am not sure about though is how well they will stick to the rim. As you can see in the video, they detach pretty easily. Something which might happen when driving through rough terrain. I hope TLG will release a smaller version of these tires in the near future, for other tractors or even combine harvesters. Both the attachments can be mounted and dismounted easily and the mechanisms to do so are nifty. Attaching an axle to the PTO can be tricky, but it will get easier after some practice. B-MODEL When building the B-model the tractor remains intact. The crane turns into a silage plow, which actually looks quite good. I will leave this one for you to build SUMMARY To summarize how I feel about this set is pretty easy. I love it! This set has everything a proper Technic set should have. Stunning looks and lots of great functions. Not sure if this is the best Technic set ever, but it is the best Technic set I ever reviewed. PROS Looks amazing Lots of functions Super cool three mode steering Functions working properly Lots of playability Front and rear PTO Suitable for MODding Lots of new pins and connectors Cool new tires Some parts in new colors Battery box nicely tucked away inside the model CONS Slack in steering Steering needs some force and can result in turning the cabin instead Makes you want another one I'd like to stress that these cons are really minor cons! SCORE Okay, so how do I grade this set? 9 DESIGN CLAAS written all over it. Looks amazing. 9 BUILDING EXPERIENCE Starts a bit unstructured, but ends well. 10 FEATURES Can't do any better than this. 9 PLAYABILITY All the cool functions offer lots of playability 9 PARTS High quantities of new pins and connectors. Oh, and them tires! 9 VALUE FOR MONEY This is what to expect of a big Technic set. 9,2 PINNACLE OF LEGO TECHNIC FINAL WORDS This set will be modified heavily, utilizing the front and rear PTO. Can't wait to see what people come up with. It's only a matter of time before we see a double wheeled version: Well, that didn't take long (posted by ctx1769, see next page): And what to think of a potential new CLAAS Lexion Combine Harvester with new smaller versions of the CLAAS tires in the rear. Yes please! Thanks you for reading this review. All pictures can be found in my album.