Search the Community
Showing results for tags 'TECHNIC'.
Found 1584 results
-
[MOC]◄Dodge Challenger 2008 SRT►[2021]
Michael217 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Dodge Challenger 2008 SRT Hello everyone It's the first of August and I'm in a hurry to share with you another project! This time I collected the younger Dodge) And this is the third car of this brand in my garage! Description: - Drive - 1 Buggy motor - Steering - Servo - Nutrition-Small BB - Brain RC brik - Independent front suspension - Rear suspension bridge with four-point mounting - The steering wheel turns with wheels - Open the doors, hood, sunroof - Well-designed interior and under-hood space - About 2000 parts Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/dodge-challenger-2008-srt Enjoy your viewing! Rate, comment! Thanks!) -
[TC20] 8408 Desert Ranger
Leonardo da Bricki posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello! I am finally back from a long 3 year dark age... Though I will be disappearing again to finish my senior year away at university. I logged on just in time to see that I had 3 days left for this contest, so I challenged myself to a one-day build. And I think I have successfully completed the challenge! Here is my revamped take on the classic Technic 8408 Desert Racer. Clean and proper photos will be forthcoming tomorrow, with daylight, alongside an entry topic. Basic info: 1. The original model, being studfull, had a lot of half-beam differences. I have tried to replicate these as closely as possible, leaving the chassis an even width (4,6,8 studs) while the front axle has a half-stud offset, along with the fake engine, not to mention the entire steering system... 2. Some colors have been changed, including, but not limited to: the front bumper is now Dark Bluish Gray, as I don't have the cams in Light Bluish Gray, the flex axles are not black instead of Dark Gray, and all the bevel gears are now Tan instead of Light Gray. Also, the Light Gray 24-tooth crown gear that drove the engine is now replaced by the modern Dark Bluish Gray 24-tooth gear. The fake steering wheel is Dark Bluish Gray, as I apparently cannot find my Light Bluish Gray steering wheel... 3. All original functions have been kept, including rear differential, HoG steering, and fake V2 engine, driven by the rear axle. Please give feedback on this model, I would love to hear what could be improved. Photos: [TC20] 8408 [TC20] 8408 Revamp [TC20] 8408 Revamp [TC20] 8408 Revamp [TC20] 8408 Revamp Cheers! - Leo -
[TC20] Super Car - 8880 studless
Shumo Lego posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
8880 can be called my favorite set of a series of Techniс, and I have long wanted to touch it by assembling it from modern parts, because I don't have any old ones, and it's too expensive to buy the original set. Getting started: Some teaser: Almost done: Final result: Description: All the features of the original set are preserved: steering of all wheels from the handle on the roof and from the steering wheel in the cabin, a model of a v8 engine with a fan, a 4-speed gearbox, all-wheel drive with three differentials, independent suspension of all wheels; Additional functions: Opening the engine compartment with a support, lifting the headlights with a lever from the cab; Comparison with the original: I'm sorry that I published all the photos at once, and not sequentially. This is my first competition for Eurobricks, and I did not immediately understand the rules. I hope I did everything right :) -
How do you build a 2 speed automatic transmission?
LegoBuilder919 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everybody. I am trying to put in a 2 speed automatic transmission, to a large MOC. I already have a 4 speed manual transmission, but it is hard to reach. I want something that when it goes up hills, it can automatically give more torque with out me having to shift it. Does anybody know how to do this? PDF instructions would be helpful. Thank you, LegoBuilder919 -
[TC20] 8846 Tow truck studless
mic8per_ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I have started building the 8846 Tow truck studless remake for the "[TC20] Technic Studless Recreation Contest" I have started with the front axle: As you can see, I will use a bit wider tires, also It will be one stud wider, so it will be 13, not 12 studs wide. Then, I have built the rear axle, and almost finished the chassis. This is all progress for now, more in next post. -
[MOC] Rock Crawler - 42114 C-model
mic8per_ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
RC Rock crawler. Features AWD drive without differentials using 69730 "Large angular position motor"(As it has realy good torque), Steered by L-motor, and springless suspension (concept by superkoala). Lack of differentials gives nice off-road perfomance, but the crawler has big steering radius due to that.42114 C-model. You can buy instructions here: https://rebrickable.com/mocs/MOC-81106/mic8per/42114-rock-crawler/#details Video: -
[TC20] 856 bulldozer revival
Toitoine posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Tractor 851 was the first set I had when I was 8 or 9. I wanted to make a new version but the set was already chosen by BrickBuildingFox for the contest. No matter ! So I will show you a studless version of the 2nd set I received few times after 851: the bulldozer 856. 856-01-original by avantime78, sur Flickr I will build it at he same scale, and try to respect as well as possible the color scheme. First step was to find the bag containing the parts, wash them, and after replace the parts (bushes, connectors 3651), brocken by the age, I built this old 856... Hopefully the gears were OK ! After I started by the bucket. I wanted it to be build with parts and not an all in one like black buckets. So here it is, the size matter the original version, 13 studs length and a flex on the Botton to close the hole. 856-02-benne by avantime78, sur Flickr 856-03-benne by avantime78, sur Flickr Now it's time to imagine and built the bull itself ! -
[MOC] Classic Porsche 911 1:10
lnteknik posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone, hope you are doing well. I have recently re-visited a model which I started building years ago when I first dove in the world of lego technic. I have made some final adjustments and the model is now complete. It's my pleasure to share it here: 911S 2.4L from the 70's - 1800+ parts - 1:10 scale - air-cooled flat six - 4 speed manual gearbox (an adaptation of the gearbox found on @Charbel's Volcano supercar) - working steering wheel - independent rear suspension - macpherson strut front suspension (courtesy of Gergely's Technic Models on Youtube) - openable doors, bonnet, and engine cover What do you think? P.S.:This MOC shares ~70% of the parts with set 42096 - Porsche 911 RSR. And I have also make sure no blue pins are visible outside. If you are interested, instruction is available here And with the orange F150 fenders available, I'm thinking about building a Targa version too :) -
Lego Mini Jeep Wrangler 1:15 MOC
dpi2000 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Mini Truck Model 8, Jeep Wrangler 1:15.No play Lego in over half a year, now 'Jeep' coming...At the same time,I would pay respects to Madoca.L motor +new wheel hubs, BuWizz normal.Infomations:L28xW14.5xH15cm, Weight: 970G,Still, simple and good playability, like RC, like real Jeep. instructions for free: https://rebrickable.com/mocs/MOC-79593/dpi2000/lego-mini-truck-wrangler-115-moc/#detailsThanks, again! Trial video This chassis part was built last year. -
[TC20] Volkswagen T1 Camper Van (10220)
RuTechBrothers posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I decided to join the Technic Studless Recreation competition. Someone starts building a car with a chassis, but I decided to start with ❤ The heart of the model will be a 4-cylinder opposed engine. -
[TC20] Indy Storm (8445)
dickylaban posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The set 8445 (Indy Storm) is a beautiful race car, it was the last studded set before lego technic goes studless. I start with the steering system It was the most difficult part to replicate due to its size. -
Kaneda's Bike (all Technic)
roeltheworld posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi all, Though work on the MV-22B is progressing steadily, I took on this little side project over the past week: Making an all-Technic MOC of Kaneda's Bike! https _hypebeast.com_image_2017_05_jordan-peele-direct-live-action-akira-tw This is what I've got so far, and I still need to cover some of the interior behind the seat (for which I'll need to destroy my little Ferrari), as well as improve the stand: Ver3_06 by Roel Cruijff, on Flickr Ver3_05 by Roel Cruijff, on Flickr Ver3_04 by Roel Cruijff, on Flickr Ver3_01 by Roel Cruijff, on Flickr Of course, I'll put on a windscreen cut out from some flexible transparent plastic. Also I'll be laminating the stickers to put on with double sided tape. I think it is roundabout the same scale as my bionic Mandalorian as well, so he may be the driver! I wanted to make this model after getting the 42107 Ducati. Just by using the Ducati pieces I got this far: Ver1_frame2 by Roel Cruijff, on Flickr ...Which didn't quite cut it, but once the start was made there really was no turning back. Of course, the interim result is not as smooth and round as the original model in the movie, nor does it have the lines and technological ingenuity of Sariel's legendary model, but I'm quite happy with how it is turning out so far. -
Dear All, It's my first time entering a contest, but here goes. I'll be trying to recreate the set 8660 arctic rescue unit. I can rememeber that a nephew of my had all the sets of the arctic line, and it was really fun to play with. I'll try to do it with the pieces I have and I'll try to finish it in time. The hardest part will be to include the snowgroomer in the mother vehicle, but I'll make the best of it. -
Hello all Technic fans, let me present you my tribute to the famous Mercedes-Benz G-Class iconic car series. As a relatively new member, I must introduce myself. My name is Igor, I'm from Russia. Adult Fan of Lego, but I usually do this hobby with my 12 year old daughter. In fact, I'm too lazy to upload my MOCs anywhere, but this time I finally decided to do it. As it turned out, creating an instruction also takes a lot of time and is not as fun process as it might seem at the beginning. My MOC is not really an original model. This amazing MOC by Artyom Gabbasov strongly inspired me to build my own MOD. For some reason, it looks like this MOC has not yet been presented here. Basically, what I built was a deep modification of it. I disfigured the hood with system and added a couple more motors. Here is a short video review so that you could form an opinion on the look and functions. Sorry for the video quality, I'm just an amateur with an old smartphone. A few words about the details... Body. Still, time goes on and it seemed to me that the old body was no longer cool, so the choice fell on the new body of 2018-2021. In addition, I decided that it would be a BRABUS tuning. In my opinion, the 2018 body looks really modern and I really like it. The body of the G-Class is square, so it won't be possible to work it out on this scale. Therefore, I focused on such details as the bumpers, the radiator grille, as well as the rear of the car. I especially wanted to make the new optics of the car recognizable, so it took me so many LEDs. The hood was conceived in the BRABUS style, but how successful it is for you to judge. Perhaps some of the parts in the MOC will be rare, but I wanted to make the body as black as possible, without blue dots from pins, etc. Interior. Here I tried to work it out as much as possible on this scale. Moreover, I wanted to keep the rear row of seats, so I managed to fit two BuWizzes in the trunk. Wheels. I used RC wheels in this model because they looked better and were more suitable for drifting. I'm sorry this is certainly not original Lego, but the choice of 62mm Lego wheels is not as huge as we would like. Functions. The car was originally designed for racing, drift and fun. But after thinking for a while, I decided that converting the MOC into a boring regular version shouldn't be too difficult. As the extra functions, in the end, I decided to make the front L-motors removable so that you could quickly change the main transmission ratio. And I also decided that the quick-release rear axle would fit too. So that during the game you can change it to a regular axle (with a differential). I also made two color variations of this car. I like blue even more, but some details in this color are even rarer (shock absorbers, e.g.) You can find higher resolution photos here: https://www.flickr.com/photos/193022960@N03/collections/72157719220016393 If you decide to repeat it, then a free instruction is available here: https://rebrickable.com/mocs/MOC-77314/igor1/mercedes-g63-brabus-2021 Feel free to share your opinion about the MOC or ask something further about it. Thank you for your attention. -
[MOC] Mammoet PTC-200-DS RIng Crane
Aleh posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone, let me introduce my latest MOC – Mammoet PTC-200-DS Ring Crane made of Lego Technic! This particular model attracted me for a long time, but since I saw it on YT installing the highest wheel in the world at UAE, I decided to investigate it’s building.So I started from calculating it’s scale and number of wheels required. Railway ring set up crane’s scale. Then I decided to make 4 ¼ carriers with two 1/8 halves inside, each on 4 train wheels. So, all in all I required 32 train wheels. So, I started to look for them on BL.Building started from these 1/8 carriers. I wanted each wheel to be driven to spread the torque all over the chassis. So each ¼ carrier is driven by L motor. Totally 4 L motors rotate 32 wheels for crane rotation :)Then I started to build main superstructure (half). Build two similar halves and connect them. Then installed winches, counterweight box and booms. There is not too much information about this crane in the network, so my build is based on some youtube videos and browsed images of the crane. I would not able to get any info from the company directly. So the crane may have some differences from the real model. And for some reason I can't say this is a scale model. For examble real crane has two rings with 64 wheels on each. Obviously, I can't build a model on 128 train wheels - this sclae is simply out of my budget.I was dreaming of a crane which would be able to lift up to 1 kilo. Luckily, this crane one can easily uplift even 1,5 Kg 😊Crane is powered by classic PF elements: 4 L motors for drive + steering rotation, 4 XL Motors for 7 winches. I recommend using 4 BBBoxes as a counterweight. Although only one is connected and needs to be charged. It would be simple to switch crane management to SBricks or Buwizzes (as there are five separate functions, you’ll require 2 sbricks or two buwizzes). Installing PU system instead of PF may become a challenge, especially for carriers. If you have only one battery box - this is not bad, crane is stable even with one battery box as a counterweight, but, obviously, it can't lift a lot or make a horizontal poisition. Crane is 210 cm high in the current configuration at it's highest position. Can lift 1500 gramms or maybe even 2000, but I didn't give it a try to save parts from stress. Fully RC with 5 channels with 3 IR receivers. Can be layed horizontally and back to working position without human help. More images Ah, building instructions are already complete and ready: https://rebrickable.com/mocs/MOC-77733/OleJka/mammoet-ptc-200-ds-ring-crane/#details -
[MOC] [C-Model] RJ's Johnny 5
RJ BrickBuilds posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is an alternate build of the Lego Set 42100, Liebherr 9800. Parts list used in the MOC is listed so you can opt to just buy the required parts instead of buying set 42100.Motorized features include: Tank drive for both tracks Arms upward/downward movements Head turn Head tilt Body tilt Manual play features include: Upper and lower eye flaps can be moved to show facial expressions. Finger movements. Limited manual arm movements Here's a link to the YouTube video to showcase its movements: RJ's Johnny 5 YouTube Video If anybody is interested, building instructions are available at Rebrickable. -
Strengthening U-Joints
Btotherad posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Okay, I had a quick idea that has not been completely thought out. So excuse the brevity and the stupidity if present. The dreaded CV joint. The haunted U joint. I had an off kilter idea I have yet to try out and didn't want to forget. I'm a loooooong time lurker here and almost forgot I had an account. Here's my solution. Has anyone here tried heat-shrinking the joints? If using a malleable type of shrink, it should still allow movement, no? And if this is not practical in theory, what about heat shrinking to the wheel hub? Maybe this is too quick of a thought but maybe would be valuable to others or possible spark investigation. -
[MOC] Ford F550 Heavy duty
LoMaC posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Instruction can be downloaded here. After second version of the Ford Bronco I decided to build another pickup from Ford, really love powerful truck with double rear wheels and also I wondered to use handlebars as part of the front grill and now you can see how this part is used in the model.As usually I am trying to follow some rules regarding the building process, therefore in this model I also used modular building, to simplify the process model is split by 4 steps.Dimensions: 18.5 x 46 x 15 studsWeight: 952 gFunctions: HoG (detachable) Working steering wheel in the cab Working V8 engine Openable all doors, hood and trunk Detailed exterior and interior Adjustable seats Modular building -
Curtiss P-40E Flying Tigers
roeltheworld posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Dear all, I'd like to show a MOC I finished last month: the Curtiss P-40E Tomahawk in the colours of the Flying Tigers in China. Tiger_11_wheelup by Roel Cruijff, on Flickr As you can see it's in dark green and khaki; colours which aren't readily available in LEGO sets. I had to order these bricks from CADA and wherever I could find them, so I hope I am not violating any rules there since these bricks are not from LEGO. Still, I don't regret it as my 'original' colour-vomit set made from mostly 42039 pieces just didn't have the right look to it: spareparts by Roel Cruijff, on Flickr It started innocent enough, with me making the front cowl and canopy... but you know the feeling, once you are that far it becomes a life mission and needs to be finished. halfway by Roel Cruijff, on Flickr At first the canopy could open, but I had to let that idea go when the controls were added. canopy by Roel Cruijff, on Flickr Really happy with the dihedral there. I used some black 15-length liftarms, which I have not been able to take out and switch to light grey. dihedral1 by Roel Cruijff, on Flickr Once the model was fairly complete, I ordered the various green and khaki parts, and came up with this: Blank_08_topview by Roel Cruijff, on Flickr Blank_03_sideview by Roel Cruijff, on Flickr Blank_05_bottomview by Roel Cruijff, on Flickr The flaps fell off right after I took this photo, so I fortified them since. They are controlled with a level in the cockpit, but I like the way they slope in down position: Blank_07_frontview by Roel Cruijff, on Flickr The flight surfaces are controllable by a small joystick behind the cockpit. It was very hard fitting the mechanisms in there, and I am afraid to take it apart for a picture as it'll be a challenge to put it back again. Tiger_12_controls by Roel Cruijff, on Flickr I am most proud of the landing gear retraction system. As you may know, the gears of a P-40 retract one after the other, so I always wanted to make it fully manual operation. Here below you can see how it works. You turn the small black cog to drive the linear actuator. this will push the gear axle back and forwards. A fixed cog at the base drives the wheel axle, and the 90 degree turn becomes a 90 degree twist, making the wheels fold neatly under the wings: Blank_13_wheelhalf by Roel Cruijff, on Flickr Blank_12_wheelturn by Roel Cruijff, on Flickr Here is the mechanism in case you'd like to try it: https://www.mediafire.com/file/fqgxwfmazzuclv0/Gear_retracting_mech.io/file The decals are simply laminated colour prints stuck with double sided tape. Works like a charm. Hope you like it and that it may inspire more WW2 aviation models! -
[WIP] Lexus LC500
StudWorks posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is my first 1:8 Lego car and my passion project for over three years. I had just finished the chassis and the bottom of the grille before a big move meant I had to wait a whole year to work on this again. Here are the blueprints for the model using Sariel's model scaler. Pic 1 is in inches and Pic 2 is in studs. This is my first accurate Lego exterior job so any advice would be appreciated. -
[MOC] Technic Tractor (Building Instructions)
makushima posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Lego Technic MOC - Technic Tractor Building Instructions: https://play.google.com/store/apps/details?id=max.moc.technic.instructions.prime Lego Technic MOC - Technic Tractor (Building Instructions) Lego Technic MOC - Technic Tractor (Building Instructions) -
Ferrari F2004 1:8 MOC (with instruction)
lnteknik posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone. I would like to share a MOC I have just completed: Ferrari F2004 F1 car It’s in 1:8 scale with 1700+ parts. Some features: working V10, pushrod suspensions, steering wheel, removable front wing, rear wing, headrest, and engine cover I have uploaded some pictures to bricksafe: F2004 Bricksafe Instruction is also available here: F2004 Instruction -
Technic-Hub - What's the rubber button for?
Andman posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Title says everything. Does someone know? -
Hi everybody, I'm newbie to the EB, so I'd like to introduce myself with this humble MOC. I'm a fan of LEGO Technic and pneumatics, especially RC ones. I hope I will meet here more fans of LEGO Technic pneumatics. I'd really appreciate any discussion and suggestions. Features: Powered and controlled by BuWizz 2.0 + 2 x Sbrick + PS4 controller + BrickController 2, 16 RC functions (12 can be used at once); 7 x PF motors - 4 x servo motors and 3 x L motors 6 x PF LED RC AWD powered by a PF L motor - with a central differential and gearing including the difference in the wheels’ diameters; pendular driven front axle controlled by PF servo motor - the pivot point is above the wheels’ axle to limit overlapping wheels on the front loader - like in a real tractor; differentials on both axles; 7 RC pneumatic functions controlled by 3 PF servo motors - 3 of them can be used simultaneously (selected manually). 3 at the front to serve the front loader, 4 at the back - one for 3-point hitch, and 3 outputs for additional attachments; pneumatic pump powered by a PF L motor and connected with all RC controlled pneumatic valves. It works proportionally to the opening of the pneumatic valves what ensures smooth work of pneumatic functions. Front loader with 4 attachments - brush grapple, wrapped bale grab, pneumatic sliding pallet forks and bucket; PTO shaft - powered by a PF L motor; trailer hitch; opening hood and doors; lights - front and rear, roof spotlight, blinkers, beacon lights; simple interior - steering wheel and driver seat; Here you can see it in action: -
[MOC] ◄Volkswagen Beetle "Bugzilla" WRECKFEST► [2021]
Michael217 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Welcome to my garage LEGO!!! Hello! My name is Michael. I'm a Builder from Russia, I love muscle cars! Volkswagen Beetle 1968 "Bugzilla" This time I collected cars from a very cool computer game Wreckfest! The assembly was very difficult, especially because of the spikes! Description: - Drive - 1 Buggy motor - Steering - Servotronic - Power supply-Small BB - The steering wheel turns the wheels - Open doors, hood... - Fashion salon - The receiver is hidden in the cabin - 2000 + parts - Two bridges, front bridge with Ackermann angle, rear with two Panar rods (for better stabilization) All this business is supported by the combined traction of 11 students. Instagram: https://www.instagram.com/lego_muscle_garage/ Join my group in VK: https://vk.com/legomusclegarage All photos on the link: https://bricksafe.com/pages/Michael217/volkswagen-beetle-1968-bugzilla