Search the Community
Showing results for tags 'STEAM'.
Found 189 results
-
1920's Adventurers tramp steam ship (Eastern Star) - enlarged real life MOC
Murdoch17 posted a topic in LEGO Action and Adventure Themes
I built this 103-stud long 1920's Adventurers tramp steam ship from two Adventurers sets: I used the boat from set 5975 (T-Rex Transport) and modified slightly to resemble set 5976 (River Expedition). The ship features a lifeboat, steering wheel, and a smoke-stack plus I have the bridge with removable roof for the top deck of the ship, and captain's quarters for the lower floor. I also have signs on the front of the ship spelling out the name of the vessel: the Eastern Star. Built in 1915 for the Octan Petroleum Corporation as an ocean going tramp steam ship (made for hauling huge pumping gear out to remote oil fields in the Middle-East), the Eastern Star ran aground off the coast of southern Italy in mid-1916 while heading to England. Captain Karloff (who now owns the ship after buying the wrecked hulk), with help from mechanical genius Mac McCloud, rebuilt the vessel to be sea worthy once more. This ship has been an great help in getting huge treasures, such as the lost golden dragon of Marco Polo, back to western civilization and into museums where they belong. The ladders hanging on the side of the lower deck lead the way to the ship's bridge on the upper level. The life boat is also back here, just in case of emergencies! Here you can see inside the ship's bridge (upper deck) and captain's quarters. (lower level) Some of the recent cargo of the Eastern Star includes: - a gyro-copter (set 70913 MOD) - silver ingots and coins - silver and gold nuggets - Dynamite (the accompanying plunger is in the Captain's Quarters / map room) - Ancient spears - the Maltese Falcon - the Burma Chicken (long-lost cousin to the Falcon) - two halves of a long-lost pirate's treasure map - Money - large rough-cut ruby - poison bottles - antidote bottles Here is a closer look at the gyro-copter model which was heavily modified from set 70913 (Scarecrow Fearful Face-off) from the LEGO Batman Movie line. I added the classic two seat Adventurers cockpit piece which is usually used on land vehicles, plus a new set of vintage 2003 landing skids. This model also comes with red and green navigation lights and two independent propeller blades. The gyro-copter is usually used in tandem with the Eastern Star steamship, scouting ahead for signs of villainy and danger and reporting back to the Eastern Star and / or home base at the supply depot. The copter is nicknamed the Lightning Rod, for it was Charles "Lightning" Kilroy who designed it. When not in use, the copter is stored on the cargo deck of the tramp steamer. As usual, comments, questions, suggestions, and complaints are always welcome! -
4-4-2 "Atlantic" steam locomotive with Great West passenger train
Murdoch17 posted a topic in LEGO Train Tech
I don't see many 4-4-2 Atlantic types steam locos around in LEGO, and even less orange-colored trains besides the TGV-like Horizon Express and SP Daylight 4449. This should fix both problems at the same time, and yes, it's build-able in this color in real life. The Atlantic type 4-4-2 (4 leading, 4 driving, 2 trailing) was the top-of-the-line express train hauler in the middle 1890's to early 1910's. Some continued right up until the end of steam in the Fifties, with the Hiawatha's of the Milwaukee Road hitting 100 MPH speeds daily with this wheel arrangement. The engine should have "3110" printed on it's cab and "GREAT WEST" on it's tender in 1 x 1 tiles. The cab of the loco with four printed gauges and the firebox door. Four identical passenger cars in matching orange paint-scheme are pulled by the Atlantic-type steam locomotive. The words GREAT and WEST are supposed to be printed on the 2 x 4 tiles on either side of the cars. Here you can see the whole train at once. I'm not sure when or if this loco and it's consist will be built, but if it is I will update this post here with better, real-world photos. LDD file available at this link here. As usual, Comments, Suggestions, Questions, & Complaints are always welcome! -
Hogwarts Express and 4-6-0 steam loco Hogwarts Castle (5972)
Murdoch17 posted a topic in LEGO Train Tech
(Note to mods: please leave this in the train tech forum, as it is be Harry Potter related, but it is more of a train build than anything else. Thanks in advance!) Since the rumor is that Harry Potter is coming back this summer, but without the Hogwarts Express. I thus made my own, but we will see if it gets built in real bricks by summer..... HP universe / Film History: Leaving from Kings Cross' Platform 9 & 3/4 to Hogsmeade Station at exactly 9 AM, the Hogwarts Express carries students (and sometimes faculty) to and from Hogwarts' School of Witchcraft & Wizardry in the Harry Potter series of books and movies. It has been seen in every Harry Potter film, from it's first appearance in the beginning of Philosophers Stone to it's last at the end of Deathly Hallows. (part two) The Hogwarts Express is usually only in the film for a short while, and it is generally a pleasant journey from Kings Cross to Hogsmeade, although Harry Potter, Ron Weasley and a certain Flying Ford Anglia might beg to differ! The Hogwarts Express is usually made up of four corridor passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. The train is supplied with all kinds of goodies and sweets, from Bertie Botts Every Flavor Beans to Chocolate Frogs. The locomotive is a heavily modified version of LDDModelmaker's Black 5 model with some parts from set 79111, Constitution Train Chase. The tender features a three wheeled bogie design modified from the one in Anthony Sava's ALCO MRS-1. The middle axle moves side to side, as to allow going through switches and curves without issue. The numbers 5 9 7 2 go on the sides of the tender... it's not prototypical, I know, but it works well enough. Also, The boiler is a modified version of set 79111's Constitution steam engine. In this false-color image, the red parts slide, the blue ones stay put to allow for the loco to go around curves and switches. (BTW: There are parts underneath that keep the sliding bogie from falling out.) The train is currently made up of five cars that are slightly different than the actual British Railway MK I coaches used in the films. The Hogwarts Express is usually made up of four corridor passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. Also, the end car is not accurate to the films, but is what I prefer to the alternative: a gangway leading nowhere with no red light on the end. the baggage / coach car (known as a combine) three regular coaches guard coach This was made by me in Microsoft Paint sometime in 2014, and was based off a image from a Google search of the Hogwarts Railways logo. EDITED 7/4/2017 to bring up to date with new pictures and ldd file. Model to be built in real life sometime around Christmas 2017. EDITED 1/19/18: Since the rumor is that Harry Potter is coming back this summer, but without the Hogwarts Express. I thus made my own, but we will see if it gets built in real bricks by summer..... Any questions, thoughts, or complaints are welcome! -
I've been quite busy with a project of mine...and she's coming along very nicely. I've named the locomotive Anton, and she's a 0-6-0 tender locomotive. She's the one between the Iron Workhorse and the Winter Holiday locomotive. I'm currently planning how to design the tender, as I want the power functions in the tender. the question is, what size tender should I attempt? Too long and it looks quite ridiculous to have a small locomotive with a large tender, and too short, and I won't be able to fit the train motor anywhere. Of course, Power functions are expensive, and that's why the tender is still in the planning stage. Apologies for the photo quality.
-
Hi all, After finishing my first steam train MOC 6 months ago- the iconic Gresley streamliner 'Mallard', I was eager to get started on another engine. After digitally designing a large roster of engines to the same scale, I decided to stick with the classic LNER designs and build my own take on the iconic Flying Scotsman. The build has evolved slightly since the original design, but not by much. Below is the original render which included the bar along the and green tender wheels. The build began with laying out the wheelbase. This also matches the wheelbase of the Mallard MOC. Then, the tender- complete with all the power functions elements! The motor's proportions meant the tender has 3 wheels instead of the accurate 4. Note the clipped wheel cover on the front axle. It wasn't an easy decision but the details look so much neater because of it. The boiler was next, and after a swift bricklink order the pieces came together very nicely. Lastly, the wheels! I can't say I've seen any MOC's that have used Big Ben Brick's Green wheels before, but here they are, and they look fantastic. There is still plenty to work on, such as decals and working piston rods (that don't obscure the width of the build too much). Fr now though, I'm happy to call this finished. For now. EDIT: I recently made a Youtube video taking a closer look at the MOC, where it can also be seen in action. I'd love to hear your thoughts on the build, please feel free to leave a comment! I'll leave with a few more images of the build. - Isaac Info on the Mallard MOC can be found on this thread:
-
Adventurers "Deja Vu 2" - steam-powered Junk (70618 MOD)
Murdoch17 posted a topic in LEGO Action and Adventure Themes
To create this steampunk-like Adventurers vessel, I added six studs of length to the Destiny's Bounty (set 70618), removed the sails, lanterns, flags, plants and assorted details. I then put twin smokestacks on the deck, and dual paddle wheels amidships. I was inspired to do all this by this picture of a prototype of the Destiny's Bounty from the "Making of the Ninjago movie" book. (Pic courtesy of legozeba's Flickr page) The rear of the ship is supposed to feature "Deja Vu 2" in printed 1 x 1 tiles next to the telescope on the balcony. I'm still working on the inside details, which should hopefully have an engine room with boilers to power the paddles. I haven't thought up a backstory for this ship.... yet. (I'm still working on incorporating it into my Adventurers / Monster Fighters / Pharaoh's Quest / Alpha Team shared universe story-wise.) Any thoughts, ideas, criticism, or complaints are welcome, and are helpful in making the ship better, so please, post away!! EDIT 101/10/17: I just added restyled and enclosed ship's bridge with actual windows, plus a new name: Deja Vu 2. I bet you heard it somewhere before... -
I would like to present my latest modeling project, the Central Railroad of New Jersey's Blue Comet. You can read all about this train in my Brick Model Railroader article. http://brickmodelrailroader.com/index.php/2017/10/26/a-tail-of-the-blue-comet-the-seashores-finest-train-in-lego/#comment-1172 Photos can be found on my Flickr page. https://www.flickr.com/photos/steampoweredbricks/albums/72157665457857519 Comet Train Set 01 by Cale Leiphart, on Flickr Comet Locomotive 01 by Cale Leiphart, on Flickr Comet Observation 03 by Cale Leiphart, on Flickr Cale
-
While the winter train and station were taking form, done this little side job for my kid to play, got excited and forgot what I was building in first place... Oh, and "Catzilla" finished the big sets.. snowflake train 01 by Rafael Costa, no Flickr snowflake train 02 by Rafael Costa, no Flickr
-
2-6-0+0-6-2 (Double Mogul) Garratt-type steam locomotive - real world MOC
Murdoch17 posted a topic in LEGO Train Tech
This steam locomotive is a 2-6-0+0-6-2 Double Mogul (Garratt-type) steam engine. This type of wheel configuration was built for use on railways in South America, Australia, Africa, and England in at least six different track gauges, according to Wikipedia. None were built for use in North America like my model is supposed to be, but I'm ignoring that fact. The engine I have made traces it's lineage to a model originally designed by Anthony Sava as a 4-6-0+0-6-4 but with fake pistons and with small-size friction bearing wheels. I added Big Ben Bricks medium flanged and blind driving wheels for use with the working pistons. The very inspirational original Sava engine is available for purchase in PDF instructions format at Mr. Sava's official Bricklink store here. Even with the added pistons, the engine easily can go around corners and switches quite easily. I did have to add two weight bricks for the pistons to grip the rails sufficiently to move instead of scrapping along the track like they were before. The engine also features a nicely decorated cab with plenty of printed tiles. (The letters BRS are the initials of my fictional railroad: Brick Railway Systems.) I got this picture from Google as an example of how close my LEGO Garratt engine is to the real deal. (I couldn't find a "real" picture of this specific type, but I know it exists according to Wikipedia. So this O gauge model of it will have to do...) As usual, I have a color-matched train in the works that this engine is to pull. To see the Maintenance of Way crane train's topic click this link. Please let me know if you have any comments, questions, suggestions or complaints. Thanks for looking at my model! EDIT 10/16/17: I edited the engine by extending the boiler four studs. The pictures have also been updated as well. -
NOTE to the MOD: First off, I am sorry if this is in the wrong place. I wasn't sure where to place it, as it is a model using both System and Technic parts / techniques. Please move this as you see fit, if you need to move it at all. I just finished turning an elongated and enlarged version of set 42064 (Ocean Explorer) into a Adventurers style tramp steamship I call the Great West. The lift-away roof and bridge sections come off easily for access to the inside, and all the cargo is removable / interchangeable. Here is the original model, set number 42064, Ocean Explorer. I stripped the deck clean of all play features and attached models to give me a good foundation for my modifications. I also got rid of the helicopter and submarine. This ship is missing a few parts such as one of this for the bow in red, and two of each of these parts for the ships name, the Great West. The ship's name plates are located on the front of the bridge and the rear of the ship. I made the ship a whole section taller and longer to make it more proportional at mini-figure scale. The ship also feature wheels on the bottom for rolling along the floor / table / whatever. The two inside sections are mostly empty, but the captain's quarters goes on the lower deck, and the command bridge on the higher level. I'm not sure what to put in the lower section, but the upper section is mostly done except for the missing chart table. Any thoughts? Technic-heads, Ship-builders and Adventuresome fellows please chime in, as I am seeking feedback on this model. The LDD file is available here. Comments, Questions & Complaints are always welcome!
-
Hi I'm new in this forum (well, actually I have been reading here for a year) so I'll do something myself. Here I am presenting my Lego Thomas and Friends range that I have designed totally in LDD. It took me about 1 year till now (or even longer) to design all the engines. First we start with Thomas Then Edward, I designed the driving wheels higher as I would use Big Ben Bricks medium drivers for that model. Henry follows Then Gordon the Express Engine Duck the Great Western Oliver Arthur Molly Stanley Annie and Clarabel to go with Thomas The red coaches A well wagon Bulgy Maithwaite Station (not finished) And finally non-Thomas related stuff A narrow gauge train layout with the existing lego track A big train station And at last a GNR C1 Atlantic engine. That is the only engine that I actually have in real bricks, however the LDD model is a little bit different - I don't have green wheels and am planning to buy the XL Big Ben Bricks drivers which should look better. I built the model out of 2 Emerald Nights, however I don't have actual pictures for the real version. I hope you enjoyed it! ScotNick P.S.: I actually wanted to upload my Thomas model on Cuusoo, but as someone else made a (not the best) Thomas model before me they didn't allow me to. P.P.: Sorry, I tried to upload the pictures here but it didn't work so I put just the link there. Edit: Found out how to post the pictures directly.
-
I was thinking of building a locomotive with a boiler that is 3 studs in diameter. Part #30360 fits the bill nicely, but I cannot think of a part that will fill the middle gap. Do you have any ideas on how to do that, or is there another part that is 3 studs in diameter that does the same job better? Fig. 1 Part 30360 was produced by The Lego Group between 1999 and 2012.
-
Green 2-6-2 (Prairie) steam loco with matching passenger train
Murdoch17 posted a topic in LEGO Train Tech
This 2-6-2 Prairie type engine was inspired by the My Own Train series of 2001 and a boiler from set 79111 (Constitution Train Chase). The passenger coaches and baggage car were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The baggage car has two opening doors, two sliding panel-doors and an "exploding" back wall inspired by set 79111. (Constitution Train Chase). The whole train together. Here we can see the rear of the train with the back wall (and dynamite) still in place. (You may notice the baggage car is a modified version of the green Western jail car I already have built) The yellow 1 x 4 bricks used are actually supposed to be green printed bricks with this on them. The tender features a coal bunker, and water tank, plus a ladder at the rear for accesses to the passenger train. The cab features a firebox door (a 2 x 2 round tile) and two printed gauge tiles. The coaches were inspired by set 10015 (Passenger Wagon), and set 10194 (Emerald Night). They feature no interior but all three passenger cars have four opening doors. The exploding baggage car was originally the Jail car from set 79111. (Constitution Train Chase) while gaining the styling of set 10015 (Passenger Wagon) and doors from 10194. (Emerald Night) This car has one play feature that is sure to blow you away: the back wall can be removed to get at the baggage compartment via the "dynamite" on the outside of the back wall. (actually, the roof top lever knocks the wall loose) Then your train robbers can make off with whatever valuable are inside! As usual, the LDD file for the whole train is seen here while the loco and tender by themselves are here. Comments, Questions, Complaints, & Suggestions are always welcome. This train is on my to-do list, but won't be built for a while... maybe this summer? -
Something I created last night in the studio. Honestly, I wanted to make a gritty, steam-punk inspired airship, mixing pieces parts from the Ninjago: Skybound 70603 Raid Zeppelin, 70601 Sky Shark, and Day of the departed 70592 Salvage M.E.C. All that I got from that was another pile of bricks. Also, a pilotable mech suit for Pirates. My inspiration was the Skeleton Mech that came with Ronin's Salvage M.E.C. Honestly, I wanted to make a diving suit for my LEGO CMF Series 8 Diver. After putting it together and taking it apart and rearranging the pieces so many times, I ultimately converted the Diving suit into a fully weaponized battle suit for the Brickbeard Pirates. Looking at the build, it looks like an extremely scaled down version of Kai's 70721 Fire Mech. Another source of inspiration, is Captain Metalbeard from the LEGO Movie. By far my favorite character, and set, from the entire thing. (I have made heavy modifications to stock Metalbeard from 70807 Metalbeard's Duel, as well as build from scratch with instructions, An Evil Robot variation of Metalbeard I've come to call Steelbeard. The foot on the left leg is the only thing I dislike about the entire build. It seems flimsy as it is supporting the entire thing, and consists of two bricks. I do like the grating on the angle piece, to make it look like a boot tread though. The major difference between this Moc, and traditional Steam Punk, is that this is more in line with the golden age of Piracy. Ergo, in lieu of a Steam Boiler, this battlesuit is fueled by Rum, grog, or anything else foul smelling that can burn in a boiler. Bilge Punk, if you would prefer to call it anything.
-
I am just curious, how long does blokbricks take to ship to the us? Are they any good? I've been thinking about the class 99.
-
This project was my first After getting the horizon express (my awakening from the dark ages), tried to learn something using the lone ranger constitution train, and a file or two from Murdoch17 (whom I cant thank enough, for helping the newcomers like I was, with the lxf files available), and after some modding and a trick or two here is the never ending project of mine, soon some passenger wagons to be added, for now just the locomotive and tender in black and white, literally... rahzmocOldWestwip01 by Rafael Costa, no Flickr rahzmocOldWestwip02 by Rafael Costa, no Flickr rahzmocOldWestwip03 by Rafael Costa, no Flickr
-
I just need some tips to build a steam loco. what parts would look good? also, would a single axle front truck, unflanged driver unflanged driver flanged driver unflanged driver config work?
-
Hi guys. I'm quite new to Eurobricks and this is my first MOC. I'm from Britain so have done a quite recognisable Great Western Railway pannier tank. I've experimented with 2 liveries a British Rail black (post 1948) and GWR green (pre 1948) I have never used LDD that much so any hints are tips will be appreciated. Thanks
-
Hello fellow builders! I felt that it was finally time to share with you all something that I've been working on/ playing with for a while now: My L-Motor Frame. L-Motor Block Types by Nick Jackson, on Flickr The concept for this project was to create a stable platform on which (primarily) steam engines could be produced with less motor& cable obstructions. L-Motor Block Types by Nick Jackson, on Flickr This would then allow the engine's body to be built relatively free of electrical components, or crammed with them in the case of tank engines. L-Motor Block Variants by Nick Jackson, on Flickr I think that the most interesting part of the frame is the fact that it is easily modifiable, and can essentially go from 2 to 7 axles! At the time of writing this however, I've only dared to go up to 4 axles for a related project. L-Motor Block Variants (2) by Nick Jackson, on Flickr Hopefully these frames and their different gear ratios will inspire you to make a steam engine! Although, there are a great many European engines that are not steam, but employ connecting rods for their drive wheels. L-Frame with Medium-Large wheels by Nick Jackson, on Flickr Lastly, here are some alternative wheel sizes that you may be interested in. These are made possible by the work of BigBen Bricks and @Shupp. The smallest feasible size would be the Medium-Large drivers by Shupp. These would need a bit of reworking from a standard L-Frame in order to clear switches and such. New Wheels!!! (2) by Nick Jackson, on Flickr Here, a set of XL wheels from BigBen fit nicely on a standard frame. L-Frame with XXL wheels by Nick Jackson, on Flickr And, by upgrading to the longer frame size, you could even accommodate 6 of Shupp's XXL wheels! Hopefully this post will benefit everyone, but moreso people who've had a difficult time getting into trains, and especially steam! Please, let me know your thoughts, and definitely share your ideas for a potential future build that might benefit from this design! Oh, and here's the link to the files: https://drive.google.com/open?id=0B9xAgBdzDImZaFFsM2lGVkdmcEk Thanks for reading, ~M_Slug357~
-
"The Crash at Crater Canyon (part 1)" is a thrilling two-part episode of the 1950s / 60s TV series Woody's Roundup. In this episode, Jessie the yodeling cow-girl is knocked out by Prospector Stinky Pete, as she had discovered Pete's plans for Sheriff Woody and the town he protects via the mine tunnels under the town filled with dynamite and nitroglycerin, set to blow up high noon the next day to destroy the town in a giant sinkhole. Jessie is then placed unconscious on a steam loco which is uncoupled from it's train and sent hurtling uncontrollably through the wilderness to Crater Canyon, where it will meet the Cannonball passenger train on the bridge. (Thus destroying the only fast way to town and keeping Jessie out of the way for the town to explode with Woody saving Jessie and not in town to stop Pete's plan.) Naturally, Woody rides out on his horse (Bullseye) to save Jessie,who has at this point woken up and discovered the throttle lever missing and steam loco's brakes disconnected. This episode ends with this scene above: Jessie reaching for Bullseye and Woody while both trains are barreling towards each other and certain destruction, while the timer on the clock in town square ticks ever closer to noon. What happens in the next episode will never be known, as the show was pulled from the airways as the film office where the future episodes and unfinished scripts were kept burned to the ground, destroying all the un-aired episodes. It is assumed, though, that Woody rescues Jessie, stops the town from exploding, and jails Pete all before the credits roll. The real scene takes place on my Eads bridge with engines 2 and 3, plus the passenger train for the latter loco. The yellow steamer is not even finished: the side not shown is missing one wheel and moving piston and was carefully staged to hide this fact! The story behind the picture is 100% fake, as the Woody's Roundup only exists in Disney / Pixar "Toy Story" films. (specifically the second one) I tried using every to make the story sound believable for that era of TV it was set in, such at the middle 1950's to early 60s when Howdy Doody and Westerns in general were very popular. What do you guys think?
-
Howdy! This is an update of a post I made earlier this year of a Durango & Silverton K-36 narrow gauge locomotive. I recently decided to submit this MOC to the Lego Ideas website as an effort to get Lego to produce more quality train sets. I shared my project with the good people at the Durango & Silverton Narrow Gauge Railroad, and I have been blessed to receive their full support and endorsement of my efforts. I consider the D&SNGR to be the finest railroad experience in the country, if not the world. If you haven't had the good fortune to ride with them, do yourself a favor and make plans to go as soon as possible. You will not be disappointed. Check out their Facebook page for information about the railroad and a look at their endorsement of this MOC. https://www.facebook.com/DSNGRR/ If you are passionate about Lego trains, as I am, please visit the Lego Ideas website and show your support for this MOC. Help me convince Lego to make this dream a reality and immortalize the great D&SNGR with the world's greatest toy! https://ideas.lego.com/projects/161449 Back to the MOC. Let's start with the engine. I am not a fan of Lego Digital Designer, so all of my MOCs are built through a trial and error evolutionary process. This is the first picture I stopped to take of the locomotive. By this point, I had nailed down the frame, wheels, and the driving mechanism. I opted for including all the power functions elements in the locomotive rather than the tender. Working on hiding the power functions. Taking shape Experimenting with the stack and the headlight. Finalizing front end. On to the cab. Getting close. Power functions access from the top. The motor makes a nice firebox. A glimpse of how the wheels are powered. Done! Now for a look at the evolution of the passenger car. Finally settling on the SNOT technique for duplicating the look of wood panels and windows with depth. Placing a horizontal stripe in the middle of vertically striped plates was a fun challenge. I eventually found a way to suspend the upper non window portions from the ceiling. I really enjoyed building this car. All done! I didn't really take any pictures of the caboose process. I essentially used the same techniques from the passenger car. The inside is pretty ugly though, as I only had so many pieces available in this color of red. Now for a few shots of the train all together! How about a little scenery? From the good folks at the Durango and Silverton Narrow Gauge Railroad! I took the train to Brickfair in Birmingham, Alabama, and it won staff favorite! Kids loved the bear in the cave. Brickfair is a blast. I highly recommend it to anyone interested in Lego or anyone with kids.
-
Can't get enough of steampunk so I figured I'd give it a go with a mech this time (my first try at that particular build). Hope you guys like it :) Steampunk Mech (6) by Andreas Lenander, on Flickr Steampunk Mech (5) by Andreas Lenander, on Flickr Steampunk Mech (4) by Andreas Lenander, on Flickr Steampunk Mech (3) by Andreas Lenander, on Flickr Steampunk Mech (2) by Andreas Lenander, on Flickr Steampunk Mech (1) by Andreas Lenander, on Flickr
-
4-8-0 steam loco with generic six car US freight train - real life models
Murdoch17 posted a topic in LEGO Train Tech
This 4-8-0 "Mastodon" type steam engine & it's six car freight train are hauling generic cargo on it's way to Anywhere, USA. This engine model was first built as a 2-8-2 Mikado (with running gear derived from Scotnick's 2-10-0 Decapod 9F) before having the front pony truck removed and a 4 wheel bogie from set 10194 (Emerald Night) added instead, turning it into a 4-8-0 Mastodon - type. The rear pony truck was removed as well, with the 79111-style boiler shortened and cab re-arranged. Together, these several different engines from four different eras and four separate builders come together to create this one 4-8-0 "Mastodon" type steam engine The coal tender was inspired by Anthony Sava's Pacific 4-6-2 model's oil tender with the letters "BRS" added in the middle of the tender using printed 1 x 1 tiles. I think the loco is much better proportioned to the tender now than before. In my fictional universe, the engine above pulls a generic mid-1900's freight train. This train consists of the following models: This drop side flat car was first part of set 2126 (Train Cars), but it didn't really have a purpose. It was hauling uprooted evergreen trees in the set, but that didn't look very good, so I changed it to generic freight. (My resident hobo usually catches a ride on this car.) This tanker car was inspired by set 7939 (Cargo Train, 2010 version) and by Anthony Sava's recent pick-a-brick MOC-up tanker car. (seen here.) I was inspired by this photo by JB Lego to build this boxcar (seen here ) They are made to haul generic freight, such as anything from unfinished car parts to prized paintings... and yes, the doors do open! Inspired by the green tractor trailer from CITY set 4204 (The Mine), this bathtub gondola is carrying boulders from the mine destined for the gold refinery where they will be opened up and the metal extracted to make coins and ingots. I have adapted this UK inspired model of a brake van by Fireglo450 (see it here ) to be a more American inspired caboose. The caboose has no interior, and the red marker light can go on either end of the model to represent the end of whatever train it is being hauled behind. -
Hello, I would like to present my latest train MOC: a German steam engine. Steam engines appeal different from country to country. In Germany most steam engines had a red wheel undercarriage, steam engines in some other European countries too. For those who like steam engines completely black: all parts for this engine are already available. For those who like a red undercarriage: please support this set on LEGO IDEAS (https://ideas.lego.com/projects/133465). The steam engine bases on the steam engine https://en.wikipedia...i/Prussian_G_12. This steam engine was a goods train locomotive, and as goods train locomotives have small wheels for high traction force I used small LEGO train wheels. I did not like the plain, high gloss surface of the tender, so I decided to take bricks with studs on sides. These studs symbolize oversized rivets. I watched LEGO sets like freight train 60052. This set does not contain only a freight train, it also contains a truck and a fork lift. So you can transport something with the truck to the station, load it on the freight car and take it to the next station. At 1925 there were only a few trucks and no fork lifts, so I decided to add a horse carriage. Now you can play as you can play with freight train 60052: you can transport something to the station, load it into the freight car and transport it to the next station. Ludger
-
This is my latest project: a 4-6-4 Hudson Dreyfuss inspired stream-liner and it's corresponding train. It was heavily inspired by pictures from Anthony Sava's photo-stream from 2008 and 2007. No instructions were used to build this model. The railway name on the sides of the tender will read Legoredo Northwestern Railroad. The sides of the engine shall have the number 7444 written on it in official printed 1 x 1 tiles. The engine number comes from the screenshot number that was the first WIP shot that I took and coincidentally is near Mr. Sava's 7244 number on his Hudson - type. Here is a link to his model and the only picture I worked from: https://www.flickr.c...s-55973205@N08/ The rear of the engine has a ladder, two hand rails and a red marker light. Here is a close up of the nose of the engine. Fictional engine background: These fifteen 4-6-4 (4 leading, 6 driving, 4 trailing) streamlined steam locomotives were designed for fast passenger work on the Legoredo Northwestern Railroad. The three best riding locomotives of the batch were shrouded in a streamlined, aerodynamic casing, and were assigned to “the Rocket”. This meant they were usually flying along at top speed from New York City to Seattle, with one train going one way and another going the opposite direction. The third engine was held in reserve in case of breakdowns, ready to go at a moments notice. Fictional train background: Here we see the Dreyfuss Hudson pulling a passenger train called "The Rocket", heading from New York City to Seattle via the most northern transcontinental line in the USA. The train is run by the Legoredo Northwestern Railroad and gets it's name from the very fast speed of the train, and for the originator of all modern steam engines, George Stephenson's "Rocket" of 1830. This new train started being run exactly one hundred years after that famous engine began the era of the Iron Horse. The train consists of one baggage car, three passenger coaches, and one observation car. (these coaches are not in the LDD file) NOTES & LDD FILE: Here is the original NYC loco I was inspired by. (picture from Wikipedia) I have found over 500+ parts for this train, so this Art Deco loco and ti's consist will be (hopefully) finished by the end of this year. I also have the LDD file for the engine by itself here ( Hudson locomotive only ) comments, Questions and Complaints are always welcome!
.thumb.JPG.1493565333fc74a41021a3de1870838e.JPG)
