Search the Community
Showing results for tags 'Porsche'.
Found 102 results
-
[MOC] Porsche Boxster/Cayman
Thirdwigg posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I'm sure like many other builders, I have been enamored with the 15 wide car scale ever since the 42098 Car Transporter came out. I have enjoyed all sorts of little cars by so many different designers, and have made a couple of them myself. The little axle base engines have been fun to see develop in many different applications, and make a great sound. Plus, being not too part intensive makes for a lot of accessible builds. As a longtime Porsche fan, I have longed to MOC some of their cars, but I have not been able to come up with a decent Boxer engine, which is key. @steph77 came up with a nice little design with a 911 designed a while ago, but I wanted another idea. I first came up with a little idea, but it did not save any space from the standard piston parts. And, visually, my eyes were drawn to the crankshaft and mounting, and not to the pistons. But I liked the rotating connectors. So after a little more tinkering, I came up with this: There are three cams on the crankshaft, and an upper pivot for each "piston." Each piston is mounted on the connectors, and swings in and out, as the crankshaft rotates. It's not perfect, but the size is right, and it makes a nice little racket while moving. Naturally, I needed to build a car for the motor. A 911 will happen at sometime, but there are not many Boxsters/Caymans out there, and I have a deep love for both. Also, after building the E30 series last year, I thought another car group would be fun. I stared with a simple mockup, with the engine in place and some other functions, and I like what I had enough to keep going. Steering with HOG is in, as is the rear differential. Then I realized I would need to have a convertible top. This may have been a step too far. I worked on a number of mechanisms using the draft table below. I think this is draft 3 of 8. The top is still not finalized, and might not be for a while. But I have enough of the placement of engine, axles, bodywork, to know the constraints I have for the top. I'll get there, but it may take some time. The idea is to have the HOG on the armrest when the top is down, and manually extended by an axle through the roof when it is up. I tend to build a Studio file when everything is done, but this project is requiring a little more design/redesign, so I have a couple of drafts in Studio now. And this is where the "final" draft currently stands. I'm not sure about the roll bars right now. I love the look, but the part is a little rare. We'll see where this goes. Not everything is working great yet, so if I can't figure it out, maybe I'll just end with only a completed Cayman. I welcome your questions, comments, and insults. -
My 23rd alternative for set 76901. This time i used ONLY parts included in set mentioned before to build a famous german sportscar - Porsche 911 GT3. FREE INSTRUCTIONS: https://reb.li/m/140170
-
Hi, guys! I know that, there is February yet and we're before March release, but let's start new topic! So, at first I want to say that 2023 wave is amazing. New brand, new mudguards, new windscreens! Whoah! And there are my speculation/cars I want to see in Speed Champions 2024: ~ Porsche 911 GT2 RS Clubsport 25 ~ Porsche Taycan ~ Audi e-tron GT ~ BMW M6 ~ BMW M4 GT3 & BMW M3 1991 ~ Ferrari 499p LMH ~ Ford Focus RS 2021 ~ Honda Civic Type R ~ Cadillac LMDH What do you think about my cars? What cars would you like to see? Show your speculation/wishlist.
-
[MOC] [MOD] Dodge Challenger SRT - 10295 b-model
Marcin Majkowski posted a topic in Special LEGO Themes
Dodge Challenger is one of my favorite cars. Both, the first generation and the current one, regardless of the edition, always gives me the effect of an uncontrolled wide smile on my face. After Lego released the Technic 42111 Dodge Dom set, which didn't really appeal to me, I lost hope of a 16 stud wide Creator like Mustang. However, in order not to disappoint Dom and faith in the family, the idea was born that it could be built from the 10295 set. In anticipation of your comments, yes I know it is too short. It would be useful to extend it by 2 studs. One on the hood and the other in the cabin. In the middle part it was my conscious choice, but the second one turned out to be an accident at work. Unfortunately it can be seen very much. The second biggest problem with the Challenger is the B-pillars and the roof. I'll not talk about it. Contrary to the Hummer, I tried to make as few compromises as possible and used most of available bricks. There is a steering axle connected to the steering wheel. 16 studs wide. Openable door and hood. A mock-up interior with folding seats. What I am most happy about is the back section, which I had absolutely no idea for when building it. These single-set rebuilds are a lot of fun. It reminds me a bit of the times when as a child I got my first sets and tried to reproduce the models that were presented on the back of the boxes. It seems to me that the fashion for rebuilds came from nostalgia for those times. In my case it is just like that. In addition, creating instructions is something completely new which also gives a lot of satisfaction. The one for the Challenger took me a lot of time and work. Its design is as challenging as the model itself. Technical info Rebuild of the set 10295 Creator Expert Porsche 911 Model: Dodge Challenger SRT Parts: 1247 - also used extra parts Height: 15 studs (12 bricks and 1 plate) Width: 16 studs (19.5 studs with mirrors) Lenght: 41 studs Functions: Opening doors and hood, moving wheels and a steering axle connected to the steering wheel. Instruction: 342 steps on 248 pages. Brickshelf Flickr Instagram Rebrickable -
Hello Porsche and Speed Champions fans, Porsche 906 aka Carrera 6 is a street-legal racing car from Porsche. It was announced in January 1966 and 50 examples were subsequently produced, thus meeting the homologation requirements of the FIA's new Group 4 Sports Car category to the number. The type would also compete in modified form in the Group 6 Sports Prototype class. For the year of the car's debut in 1966, it achieved numerous victories. The main inspiration came from a plastic toy car which I received as a child. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-106735/_TLG_/porsche-906 It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer the brick built solutions to keep the flexibility of the used parts in further builds, and therefore only a standard vehicle registration plate sticker is used. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic front, the side view mirrors, the side air intakes etc. . Maybe the most challenging one was the iconic headlight, lots of solutions were tested before the final one. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for one minifigure. I suggest to use a helmet or small hair. Thanks for visiting, _TLG_ Porsche 906 - Instructions 1 by László Torma, on Flickr Porsche 906 - Instructions 2 by László Torma, on Flickr Porsche 906 - Instructions 3 by László Torma, on Flickr Porsche 906 - Instructions 4 by László Torma, on Flickr Porsche 906 - Instructions 5 by László Torma, on Flickr Porsche 906 - Instructions 6 by László Torma, on Flickr Porsche 906 - Instructions 7 by László Torma, on Flickr Porsche 906 - Instructions 8 by László Torma, on Flickr
-
Porsche 911 RSR [RC MOC]
Daniel-99 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone! Im very glad to show my RC Porsche 911 RSR. As always, story begins far far in the past... My childhood dream was to get an RC car... Some time ago I shared with you a Corvette RC mod, and that was the "first step" in my dream coming true! In that project I understood, that a lego car can go a decent speed especially with the Buwizz 2.0. BUT... But the speed uncovered a another problem, that is the lack of control! Lego bricks have too much wobbling... Searching for the solution of this problem in the internet I found several buggy projects with technic bricks that has a positive caster... Ant I instantly understood that the positive caster is the thing I need in my car. Also, I was struggling a lot with gigantic scrab-radius. But in that time all rims produced by lego was symmetric. Finally, the Land-rover set has arrived... And the new rims give me some hope... Now I was going to build a 1:10 scale car. But the Land-rover set itself was a bad candidate for motorization due to it`s mass and a wobbly chassis. Due to the lack of skills in bodywork I decided to modify the lego set. I choose a Porsche 911 RSR set for my needs. One would ask me: why you call this RC mod a MOC? Well, the cassis of lego sets are totally inappropriate for making RC cars - most of them are too wobbly and weak. Moreover I wanted to build a positive caster. So I decided to build a custom RC chassis that will for to the bodywork of the initial lego set. Here is a front suspension. Yeah, that is my first "finished" chassis with suspension. Do you see some unusual ideas? I managed to build a double steering arms in order to make the steering system stronger. Moreover, I made a double steering rack steered with a single gear... On the back I decoded to build a live axle with motors connected directly to wheels: no friction on gears, no weak universal joins... I used the original instructions to check the dimensions! Here you can see the finished chassis - nothing special! I placed several smaller wheels for comparison. I would like to mention, that my first RC car was build with the smallest wheels (the very right wheel on the photo). The main reason why I build a car with small wheels was the lack of power the lego motors have (as I thought back then I was at the very beginning of my lego technic build experience). The main question for now: will the motors have enough power to move this big chassis? I made the first drive, and the car really goes well! Unfortunately I did not make a video, but it was going about 7-8 km/h - that was not a bad speed comparing to the 9398. After finishing the chassis I started the bodywork. Then I build front and back parts of the body (with a lot of changes from the original) I decided that it would be great to have a single body-unit that sits on the chassis on several attachment points. And this is the result: The main reason why I build a detachable body is because I was going to make modifications of chassis! Hope you like my post and the car ;-) Feel free to comment on technical aspects. P.S. one fan fact about this car: this RC car has only one gear! - sounds crazy, isn`t it, -
42137 - Formula E Porsche 99X Electric
Ngoc Nguyen posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
From promobricks.de: For € 49.99 you can get a 422-part Formula E Porsche in January. In terms of color, the model comes very close to the prototype with a white-black basic color and a red wing. The details, straight the nose and the upward sloping halo, are probably less well taken. Apparently this model is also equipped with a pull-back motor. Set number: 42137 Name: Formula E Porsche 99X Electric Number of parts: 422 Release date: January 01, 2022 RRP: 49.99 euros -
[MOC] Porsche 911 GT2 RS
Lukes_Brick_Studio posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone, I am really glad to present you my new MOC, a replica of the Porsche 911 GT2 RS. My goal was to built a fast and good looking car, so it has not that much technique inside of it (it just uses one single gear for steering :) ). This model is RC and has the following features: Rear wheel drive powered by 2x Buggy-Motors (top speed is around 12-13 kp/h, in ludicrous mode 14-15 kp/h) Steering powered by a servomotor Working rear lights Independent wheel suspension Opening doors and detailed interior and exterior The car is powerd by Buwizz, so it has plenty of power. Dimensions: length: 35,5 cm | 46 studs / width: 15 cm | 19 studs / height: 11,2 cm | 14 studs Scale: 1:12 The model is relatively small compared to the Lamborghini Sian. Important Picture from the bottom ;). I made some 3D printed wheels and panels for the car. The car with normal lego wheels. You can find more pictures (including some from the building progress) at: https://bricksafe.com/pages/Lukes_Brick_Studio/porsche-911-gt2-rs Comments, suggestions and questions are always appreciated. See you. -
Hello, as you might notice my name is secret... for now! I recently bought my first Lego set in 8 years and I'm excited to get back to my love for Lego. Here is what I picked up:
-
[MOC] Classic Porsche 911 1:10
lnteknik posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone, hope you are doing well. I have recently re-visited a model which I started building years ago when I first dove in the world of lego technic. I have made some final adjustments and the model is now complete. It's my pleasure to share it here: 911S 2.4L from the 70's - 1800+ parts - 1:10 scale - air-cooled flat six - 4 speed manual gearbox (an adaptation of the gearbox found on @Charbel's Volcano supercar) - working steering wheel - independent rear suspension - macpherson strut front suspension (courtesy of Gergely's Technic Models on Youtube) - openable doors, bonnet, and engine cover What do you think? P.S.:This MOC shares ~70% of the parts with set 42096 - Porsche 911 RSR. And I have also make sure no blue pins are visible outside. If you are interested, instruction is available here And with the orange F150 fenders available, I'm thinking about building a Targa version too :) -
Porsche 911 10295
trinitechnic posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, Forgive me if I'm posting this in the wrong forum, I'm only familiar with the technic forum. I wanted to ask, would 10295 ultimately be available from retailers? I live in the Caribbean and have to order my lego from Amazon US, but I've noticed that 10295 is yet to appear for sale there. Is it that it would only be a lego store exclusive? The US lego site won't ship to me. If anyone can advise me I'd be most grateful. Sorry for being a bit off topic. -
LEGO MOC#72-3 German Police Porsche 911 I have modified the previous Porsche MOC to be the German Police version. I also created a stop motion animation story for them. Welcome to take a look:
-
[MOD] 10295 Porsche 911 Remote Controlled
Cyrix78 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I continue my mission to motorize the Creator Expert fleet, have already done a bunch other of them. I always try to make the motorization as inivisible as possible, you should not be able to see any electronics without looking very carefully. As the Porsche is pretty big and heavy I used ad Buwizz and a Large motor geared up 20/12 to give it the power that a Porsche deserves. If you do not need Turbo Power it could also be powered with a cheaper CaDa system. Since the PF servo is so big and bulky, i have used an M motor with a rubberband return to center function instead. Also added 2 pairs of Power Function lights, altough I am not totally happy with the front lights, but this was the best I could come up with. Because I am creating instructions for other to build this, I have not used any rare/expensive bricks and tried to reuse as many bricks as possible in new locations. It only requires about 150 extra bricks and electric parts. If there are interest, I might create Power Functions and/or Powered Up versions later. I have some ideas to hide the IR reciever and there is still space for a slightly larger battery and motor. Youtube video Rebrickable Instructions -
.thumb.jpg.fd2a9cb77204ad255ccaa0b983c2b569.jpg)
10220 Custom Porsche Rallycar
a1i2d3e4n5 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Alright, so this is my second post on Eurobricks, and my 3rd alternate of the 10220. Here I have a custom Porsche rallycar with some additional features. The "costum" stuff is a huge spoiler and rear seats. If you didn't know, most Porsches don't have rear seats. Functions Opening hood with trunk space Opening doors with nice interior With doors opened, the seats fold down to access the rear seat Opening trunk with flat 6 engine Soon to be on Rebrickable for $2.50 for instruction, search "a1i2d3e4n5" and find this model. Enjoy! -
MOC #72 1974 Porsche 911 Turbo 3.0 It is a minifigure scale Porsche 911. After I built the #75895, I was not satisfied with how it looks. So I designed my own version. The hood, doors, and the engine compartment door can be opened. Two minifigures can set side by side. I also created a stop motion video for this MOC. Welcome to take a look :)
-
This has been my first LEGO MOC, I designed this on BrickLink Stud.io after Porsche collaborated with Star Wars to make their own spaceship. When I first saw their design I instantly fell in love with it, and I thought I might just make that in LEGO. Thanks to everyone for taking a look. Pictures
-
Hi all, I'd like to present my latest MOC of a Star Wars ship that, er, hasn't ever been in Star Wars... Tri-Wing S-91x Pegasus MOC by TeddytheSpoon, on Flickr The Tri-Wing S-91x Pegasus Starfighter is a concept ship that was developed as a collaboration between Lucasfilm and German car manufacturer Porsche's respective design teams. I believe it was originally intended to be in the background of the Battle of Exegol, and the concept art was released to promote the film; although for whatever reason, it doesn't appear to be in the film. (That's only hearsay, by the way, I'm not 100% sure if that's true!) Tri-Wing S-91x Pegasus MOC by TeddytheSpoon, on Flickr The final design uses just over 1300 pieces, and the process was a real mixed bag. The central fuselage came together nicely and I'm very pleased with the cockpit area in particular, but I spent so long trying to find a decent SNOT solution for the wings that I eventually gave up and went with wedge plates. I don't think the result looks too bad though! Tri-Wing S-91x Pegasus MOC by TeddytheSpoon, on Flickr While I think the model is a decent representation of a pretty obscure ship (there's only half a dozen or so pictures that actually exist of this thing), I'll probably continue working on this - I think the landing gear in particular could use some work as it's pretty flimsy. I've also done some experimentation with luminous bricks for the first time, so I will likely do some moody darker renders next to bring them to the fore. Let me know what you think of this strange ship!
-
My first Technic
discoburg posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The 42096. -
Overall I'm quite pleased with it, wanted to brick build the 1979 Kremer Racing livery but that's difficult to get right, so went with Martini livery instead. Just got reminded that this looks like Autobot Jazz too. Thanks for viewing :) KMPMOCS
-
[WIP] Porsche 911 RSR
jensbrix posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi, I've been working on this project in recent months, and I felt like sharing it at its current state. The majority of the design is based on my favourite car, the Porsche 911 964 RS 3.8. However, as I find it difficult to replicate the front of the 964, I've added a bit of the 911 997 GT3 RSR into the mix. At this point, the content of this post is only related to bodywork as I've always found it very difficult to develop. I've also worked on the chassis in parallel, which contains steering (maybe HoG should be added), suspension, a flat 6 engine, and a manual 4-speed gearbox with linkage. Maybe I will include the chassis in the next post. The front and rear axles are 25 and 27 studs wide respectively. Obviously the A-pillars are still missing, and some parts of the bodywork are still floating. I'm currently considering if the roof should be narrower and tilted slightly, but I guess it will be more clear when I start to design the A-pillars. I'd be very happy to hear some ideas for improvements, things that seem out of proportion and general feedback. Also, I installed BrickLink Studio to make the renders, but I found it difficult to make the 19L flex axles around the wheel arches look natural. Do any of you have some good advice on use of the flex tool in Studio? Best regards, Jens -
Hi everybody, This is my first post on the forum but i've been an Eurobricks fan for several years! Every MOCs that I see on the forum inspires me a lot. So here's a Porsche Dealership that i made on LDD last year. I'm looking to build it for real soon. There's a full dealership interior, a Porsche Design Shelf and a repair shop. Hope you like it! Tom PorscheStore_1 by Tom Clair, sur Flickr PorscheStore_4 by Tom Clair, sur Flickr PorscheStore_3 by Tom Clair, sur Flickr PorscheStore_2 by Tom Clair, sur Flickr PorscheStore_5 by Tom Clair, sur Flickr
-
[TC18] PORSCHE 911 RSR
Silvavasil posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everybody! Thanks to the organizers for this contest, I will participate for the first time! I chose the Porsche 911 RSR We are waiting for a detailed car with high detail. Doors and engine compartment open Rear independent suspension HOG and I will try steering control Mid-engine Maybe stickers Wheels 49.6 -
This is inspired by the Rothmans livery. The stickers are from Speed Champions Ford Fiesta set, would love to have dark blue mudguards but they are very rare at the moment, and unfortunately those inverted slopes aren't available in dark blue. Thanks for viewing :) KMPMOCS
-
My latest MOC, an 8-wide Porsche 917K. Studio file available for sale on Rebrickable : https://rebrickable.com/mocs/MOC-30893/KMPMOCS/porsche-917k/#bi Thanks for viewing :) KMP
-
[MOC] 2019 LEGO® Porsche 99X Electric
Malte-Dorowski posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
1:17 LEGO® Porsche 99X Electric The TAG Heuer Porsche Formula E Team is using the Porsche 99X Electric for the first time in the 2019/2020 season. In mid-October 2019, the Porsche 99X Electric will be in action for the first time during test driving on the racetrack. The electric drive technology "Mission E" was already introduced by Porsche in 2010 with the first Porsche hybrid race car, the 911 GT3 R Hybrid. The 800-volt technology used in the Formula E is also used in the production sports car from Porsche, the Porsche Taycan. The Porsche 99x Electric accelerates from 0-100 km / h in 2.8 seconds. LEGO® 1:17 scale replica of the Porsche 99X Electric consists of 458 LEGO® elements. By Malte Dorowski - malte-dorowski.com
