Search the Community
Showing results for tags 'Mashup'.
Found 7 results
-
Get ready to sail the 7 star systems with this fearsome vessel! Solar powered light speed engines, a fearsome crew of 4, plus their one legged captain, this ship is ready to tangle with anyone who comes across it! https://ideas.lego.com/projects/f8b37d14-140b-4d3c-a43c-04b246421ffc/comments_tab?comment_uuid=548d54cb-e7c5-498b-a41f-77cbcc5359df#comment-548d54cb-e7c5-498b-a41f-77cbcc5359df&gid=1&pid=1
-
Weak clutch gear [idea]
Captainowie posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Howdy folks. Like many of you I'm sure, I'm taking the time to do a bit of building in the time off between Christmas and New Year. I've come across this little design that I haven't seen before, and thought I'd share in case someone finds it useful. If you would normally be using one of those white 24-tooth clutch gears (that slip after a certain torque is reached) but the torque limit for that gear is too high, or you can't fit the spur gear easily in your drivetrain, you may find this construction useful: Now, I accept that in practice it could be trick to work this into a MOC - the gear can only be supported one one side (unless you put a pin-joiner on the end and extend the axle from that) and a stud away from the support at that. But these aren't insurmountable, and if it's all you have, then you'll make do! On the other hand, it's also useful if you want to _add_ friction to a drivetrain for whatever reason. An alternative to sticking a normal gear on a friction pin. Owen. -
[PORSCHE] [MOC] Porsche 914.5 SpyTarg
TheMindGarage posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is my entry for the Rebrick competition. Essentially, it is a mashup of the 911 Targa and 918 Spyder (the 914.5 is the average of the two model numbers). It is built to 1:10 scale. Back in 2011, there were rumours of Porsche introducing a model between the 911 and 918 Spyder (one website did joke about calling it the 914.5), but such a model hasn't yet been manufactured (although it is being developed as the Porsche 960). The model is roughly 1:10 scale at about 58 studs long, 25 wide (27 including mirrors) and 16 high with 68.8x36mm wheels. Please bear in mind that I am a relatively inexperienced builder having only been building for 2 years and with only a few thousand parts to hand - by the end, I had completely run out of light grey parts. I went for function over form - while I am good with making ultra-compact mechanical systems such as gearboxes and suspended axles, bodywork isn't really my strong point. Sorry that the video is a little shaky - looking into getting better video equipment. Please watch it - you'll get to see the internal workings right down to the core! I haven't provided many pictures here because the detailed stuff is in the video. This is the FULL video (>1min) - the video I submitted to the Rebrick competition is a cut-down unlisted version of this. A full list of functions: Flat-6 piston engine in rear, driving rear axle. 8-speed paddle-shifting gearbox (sequential) for the piston engine. PF Large motor driving the front (no gearbox, just like the 918). Unfortunately, I don't have any IR components other than MINDSTORMS, so it isn't RC. Full independent suspension with non-zero camber and castor angles (I think it also has kingpin inclination - not sure about that). Steering wheel operates 4-wheel steering. The knobs on the front (black 12-tooth gears) and rear (hidden, accessible through rear window) control the suspension's ride height. Each wheel has its own control, so it is possible to make the car lean to one side (might be useful for oval racing). Two seats in the front with opening doors. Retractable rear wing. Folding targa-style roof. I also made a few custom stickers for this model (unprofessionally of course - just printed them out on paper). The Porsche logo is on the front, the steering wheel and the wheel hubs. The rear air intake slits (911-style) are also done with a sticker. I added the Porsche brand name and a fake model name on the back. The "Spy" and "Targ" bits were edited out of the actual "Spyder" and "Targa" logos; the "914.5" was done from scratch. The number plates aren't my own - you may recognise them from the 42043 set. You can probably tell that I lacked good headlight pieces even after searching though my dust-filled System brick collection. The best I could find were white 24-tooth clutch gears - I guess that gives it a hardcore-TECHNIC feel. Thanks for reading :D! -
[PORSCHE] [WIP] 914.5 SpyTarg
TheMindGarage posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
About 5 years ago, rumours were around hinting at a new supercar positioned between the 911 and 918 Spyder. Some dubbed it the "914.5", coming from the mean of the two model numbers. Unfortunately, such a car hasn't yet arrived, and I plan to solve that problem. This will be the true "Dream Porsche", taking features from both the 918 Spyder and the 911 Targa. It will combine the hybrid all-wheel drive and 4-wheel steering of the 918 with the iconic rear-mounted flat-6 engine and roof of the Targa. Here are my definite features: Flat-6 engine mounted in rear 8-speed paddle-shifting manual gearbox (connected to piston engine, driving rear) Fake electric motors "driving" the front and rear (as in the 918) Full independent suspension with camber angle, castor angle and adjustable ride-height (independent adjustment for each wheel). Not sure where the ride-height controls will be - probably under the front hood. 4-wheel steering (as in the 918) operated by the steering wheel. Opening hood and locking doors. 2 seats inside. Folding roof modelling the 911 Targa's mechanism. Here are features that I might add if I have enough space and parts: Brakes - not sure how these would be operated if they get added. A PF Large motor and battery box to drive the front axle. Like the 918, the front is single-speed. Unfortunately, the only RC stuff I have is MINDSTORMS, which would be too bulky for this. Opening rear revealing the engine. The car will be 1:10 scale - considerably smaller than the 911 GT3 RS from LEGO. I haven't started building yet - I still need to add a couple of finishing touches on my current build. However, most of the "technologies" (such as an 8-speed gearbox and adjustable suspension) already exist in my current build, so this will likely be finished by mid-July. UPDATE 1 (03/07/2016): Paddle-shifting mechanism and steering wheel mount Having dismantled my previous build, I have built this compact steering wheel mount with an integrated paddle shifter. The two levers on either side of the steering wheela are paddle-shifters. They shift when pushed inwards. Here is a side view: Each paddle makes a lever move downwards and hit the cross-shaped element. I initially used a knob wheel, but it was too small for the lever to make it advance far enough. When the lever extends, the cross rotates about 75 degrees before the lever blocks it from going any further. When the paddle is released, the lever retracts and allows the cross to rotate the final 15 degrees. The paddles have rubber bands to make them return to their original position when released. The part with the wedge-belt wheels can slide a short distance. It too has rubber bands - this makes the cross "snap" to the nearest 90 degrees and provides the turning force for the final 15 degrees of rotation. There is also a universal joint - this is connected to the steering wheel. -
Bit of a mashup but ostensibly a Scooby Doo MOC for Brickvention. DSCN0252 by Gav*, on Flickr IMG_0699 by Gav*, on Flickr
-
If ghosts need busting on Mars, this is how it might be done In LDD, I modified the original Cuusoo/Ideas version of the Mars Rover to have a Ghostbusters feel, attempting to add as many of the greebles present in 21108 while still retaining the Rover feel and function. Added a proton pack to the front and then the Rover's instrument boom becomes the nozzle, with silver flex hose connecting the two. The wheel hubs on both original sets are the same size, so easy to use 21008's wheels, and silver wheel covers, with 21005's tires. Also attempted to capture the 21008's Caddy tailfins onto the Rover body. A little photoshopping on these images to add the sticker images to the model. Too much? Sacrilegious? Are you ROFL? I want to see what people think of this before I go get the parts, as I won't part out my Ghostbusters set just yet, but will mod the Rover accordingly,
-
Right now (1-23-14), over at TeeFury there is a cool mashup of Lego minifigs and Shaun of the Dead! I picked up one of the Lego themed shirts, but some of you may also like the more Cornetto Trilogy related shirt.
