Search the Community

So my first table were odds and ends of plywood joined together by plywood scraps underneath and placed on my dining room table. It was, in a word... rough. With the removal of the dining room table, an opportunity arose to build a new table in the basement under the stairs which doubles as the dogs "pound". The goal was to maximize space while leaving clear paths to get to the laundry room and the dogs area under the stairs. Also, there was a pillar to deal with. I started by staring at the space until my eyeballs ached. I really didn't want to make mistakes after cutting. Finally I came up with this sketch: Everything looks right on paper though. I decided to tape it out, to be sure it would work: The dimensions worked out to be 7.5 x 9.16 feet with an access space of just under 3 x 3 feet in the middle. I decided to abandon the "L" shape in favour of a square. Time to cut wood! Specifically, 3/4 inch plywood from Home Depot. I hate warping and uneven surfaces so I went thick. In deference to my family, I made the decision to add some rubber shelf liner material for noise reduction My last table I painted the plywood green. This time I went with vinyl cloth. My wife did an amazing job wrapping it for me. A table needs legs. These came from my local Canadian Tire 2 to a pair. To prevent bowing, I added a third leg to the long sections. The short sections got one leg each. The braces were added to level the connecting edges. Finally, as a finishing touch, it was decided to add skirting to the table. Ta Da! Now to the Nitty Gritty: Budget. The total cost was $426. It was more than I budgeted, but I was willing to spend a little more to make it look good. The skirting in particular was a bit pricey, but I figure If i'm going to blow all this cash on plastic, I can at least have a good space to put it on, especially since I don't use base plates. So overall I had a great experience making this. I am NOT a handy person, but I pulled this off (with help from my wife) and I feel very proud whenever I come down and see what I built with my own hands. I also like that it is modular and can be added to (or rearranged) in the future. for now, it's time to plan my layout! Here's what I've got in mind (note the bridge): Thanks for reading!

Hello everyone! I just recieved my 2014 set 21019 Eiffel Tower. I will try do to a review of it in the following days. If not, i will still post some photos of the box, booklet and set as soon as i have the opportunity. I'll be back with either the photos or the full review.

Hello everyone, Many of you have been highly anticipated of this elusive eleventh series and only until recently in mid-July where the Internet have seen picture leaks and distribution in Poland of this LEGO Collectable Minifigure Series 11. I am sure many of you are anticipating and wondering if this traditional pictorial review will ever come and I am extremely glad to be able to deliver once more to share this iconic reviewing traditional feature of my favourite LEGO Collectable Minifigures right here exclusively in Eurobricks. In the not too far distant past, The LEGO Group (TLG) had just recently released Series 9 in just six months ago and Series 9 is now slated for 'retiring soon' and 'sold out' in the Shop@Home/US. Series 10 is still currently available but I am sure with the new Series 11 coming to the stores worldwide, it is only a matter of time before Series 10 face the same fate as Series 11. LEGO fans will have to act fast before you miss the LEGO Collectable Minifigures craze. Firstly and always, I will like to give my very most sincere continued thank you and gratitude to TLG for giving me this very exclusive 'early' insight before others, so I could have enough spare time to work, evaluate and review this brand new LEGO Collectable Minifigures Series. I will also like to give my thanks to Eurobricks Staff/LEGO Ambassador, CopMike and my fellow Eurobricks Staffers for being so helpful and supportive to this reviewing endeavour. Last but not least, the most important person which I must thank, is my beloved wife, Kim/Belun for being very understanding and supportive throughout this chaotic and hectic period of ours! I am almost saddened if I can't release this review at the given releasing date especially since so many things are happening all at one go. I am truly glad that I am able to see the end of rainbow and able to share this reviewing achievement with everyone once more. As always, we shall do a re-cap for all of the past Eurobricks Collectable Minifigures polls once more. It started with a humble beginning of Series 1 followed by Series 2 in the year 2010 and it continue to spread like wildfire with another 3 strong waves of minifigures craze in the year 2011, putting Series 3, Series 4 and Series 5 in an excellent harvesting year. In the year 2012, we celebrated with Series 6, Series 7 and recent Series 8. With the beginning of the year 2013, we have the recent Series 9 and Series 10. Now, I will like to invite the Eurobricks Community to cast their votes into this brand new Series 11 poll statistics as well. Name: 71002 LEGO Collectable Minifigures Series 11 Theme: LEGO System / Collectable Minifigures / Series 11 Year: 2013 Minifigs: 16 unique minifigures Price for 1 box: USD N.A, GBP N.A, EURO N.A, SGD $294.00 Price for 1 packet: USD 2.99, GBP 1.99, EURO N.A, SGD $4.90 Resources: Brickset, BrickLink An image of an 71002 LEGO Collectable Minifigures Series 11 box This eleventh series came in a very nice and cosy green schema which certainly adds some holiday spirit into it which kind of suitable for the upcoming Christmas festive mood at the end of the year. [Reference 1] [Reference 2] [Reference 3] The 11 different colour packaging themes for Series 1 to 11 boxes The amount of efforts to retrieve all of these boxes from my storage area is pretty hard and I hardly have the desire to keep empty boxes in its original state since storage space is a scarce resource to me. Putting them together is just always an amazing feat and all of these boxes have actually exceeded the studio background height. However, it is definitely worth it to place all of the 11 LEGO Collectable Minifigures boxes together for this superb unique group photo which is a sight to behold to witness the different colour transition for the different series. What could possibly contain within these mysterious sealed packets? This is the next new incredible Eleventh Series for the legendary LEGO Collectable Minifigures Series Theme The LEGO Collectable Minifigures Series (CMFs) is slated for worldwide release on the 1st August 2013 or 1st September 2013. This is another outstanding piece of achievement for this very special LEGO theme, where it has successfully released a total of three series in the year of 2013. The TLG CMFs design team has certainly outdo themselves by able to amaze and marvel us with so many more new integrative and unique minifigures' designs. I am sure most of us have not taken aback by the recent maniacal craze of hunting Series 10 - Mr. Gold? Despite of the Mr. Gold craze, the LEGO CMFs theme remain a force not to be reckon with and continue to stand proud which shall remain as one of the popular themes to acquire for many LEGO fans out there. I will leave to our fans to decide for themselves if Series 11 continue to live up to the high expectations. To me, this series remain a huge importance in the LEGO history and affirming my belief that all of these minifigures in the past, present and future series will continue to be regarded as part of the 'Golden Age' for the LEGO CMFs theme. Please do note that the naming that I have use for this review are official TLG minifigures naming for Series 11. So, there is absolute no doubt or misinterpretation on the naming used. Front view comparison between Series 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11 packets Wow, just plain wow! Isn't it amazing when all of the packets for the entire series are placed together for a group photo? This is just so magical to see the entire different packets for Series 1 to 11. There are altogether 11 different packets and design packagings for this single theme since the birth of the LEGO CMFs. Many of the earlier series such as 1 and 2 are considered to be pretty vintage at this point of release since the access to acquire these older series are considered to be a hefty challenge for forking out more money to purchase them in the secondary market since they are released in lesser quantities unlike those more recent released series. Just take any of this packet and open it. If you can just hold all of the 11 packets in your hand based on the above illustrated image. Rip it open and you discover a random LEGO minifigure that can be special to the person who is buying it. Be it for the parents, children, AFOLs, casual shoppers, there is always a random something for everyone of us and I guess this is an easy way to bring back a person who is in the dark ages by tempting them to open up these packets! To add on, I actually got a bin of unopened packets which I have not marked them with, even though I am sure the minifigures which I have bought are the ones I like. It is just that it is still quite a random feeling for me not to find out what it is in there, without the touch and feel method. Take a closer look at these. This is the front view of the Series 11 packet, while this shows the back view of it. Last but not least, this is an image that shows the back view comparison of all packets. I am going to repeat this very same golden rule, likewise in all of my previous reviews. If you are intending to narrow the precious and scarce minifigures that you are collecting, please continue to hone the touch and feel method. It is an useful skill set to acquire and locate the minifigures that you want without wasting additional money to randomly acquire them especially when you are intending to buy large quantities. Your sole mission is to memorise and remember the minifigures assortments for each of the specialised designs. Isolate and identify the most unique accessory or accessories that appeared for the particular minifigure. From there, eliminate the torso, head and legs away and feel for other parts. The only disadvantage of this method is much idle time will be most likely wasted if the minifigures that you are seeking for does not exist in the box or ending up having sore numb thumbs after feeling. However, I personally feel that this approach is the most practical that works the best for me than any other uncommon approaches. Front view of the Minifigs Series 11 promotional leaflet Back view of the Minifigs Series 11 promotional leaflet 1) The savage Barbarian The savage barbarian can be regarded as a person who is perceived to be uncivilised, rude, wild, unrestrained and insensitive. More importantly, the barbarian is also known for its feat brute strength that could certainly overwhelmed its opponents in relative ease. The immense fierce appearance of his, is very taunting especially with the remaining battle scars that etched deep into his skin. Even though his appearance may not be as gallant as a shiny knight but his quest for freedom and brotherhood continue to be strongly desired. I could have make it up but the barbarian is someone who I will like to form a tribe of warriors or even mercenaries awaiting at the tavern to accept any dangerous and highly paid quests. Parts assortment The parts assortment is decent and I am glad to see two sharp gladius swords that allow him to master duo swordsmanship which clearly demonstrate his strong offensive approach. There are two different prints on his either side view. The first image show the wrap on his wrist while the second image show the wrist guard or similar on his other hand. I am also very pleased to note the side prints of his legs which add some fair details in it. There is also back printing at the back of the Barbarian. The hairpiece also reminded me of the character, Prince Dastan in the Prince of Persia movie which is a fine hairpiece to use it for many other scenarios. Aren't we look quite similar to one another? Fighting for my freedom Ferocious Warriors 2) The stoic Scarecrow The stoic scarecrow may look unglamorous but in actual fact, the scarecrow's main intention is to act as a decoy or mannequin which resemble in the form of human being wearing in old tattered clothings. It is placed and positioned in the midst of the crop fields to discourage the presence of birds such as crows or sparrows to disrupt the growing of crops. Basically, the Scarecrow is meant to scare these birds away. It is not the same type as the DC Batman Comic villain, 'Scarecrow'. For my take, I am extremely happy to see a scarecrow looking character appearing which is geared towards the LEGO Farm theme. I will probably welcome a fleet of these scarecrows to be ready for placing in the crop fields. Parts assortment The parts assortment is excellent. You are able to notice that the straw hat and the crow are some of the appealing factor and it is probably good news for some fans that the two parts can be separated from one another which will allow them to use the black crow as another fine piece of animal and the straw hat as an useful new head-ware. From this angle, you are able to take a closer look at the scarecrow Furthermore, I am most welcomed with the inclusion of the uncommon pitchfork accessory which was recently re-introduced back as reddish brown colour unlike the old Classic Castle brown appearance. Till this date, there are a total of 17 sets which contain a pitchfork. You will also notice that there are some detailed side printing on this side and the other side which both reflect different prints at the sleeve. Not to miss out, that there is a back printing as well. This is indeed a fine designed minifigure in this series. The body of the Scarecrow My crops will be safe from crows 3) The festive Bavarian Lady I supposed this festive looking lady is originally from Bavaria which is located in south east of Germany. Her attire is a type of traditional dress, known as Dirndl. Pardon for my lack of knowledge in this area, as I have only commonly seen this attire in Germany where many young women are seen wearing during the period of Oktoberfest in Munich. Nonetheless, this is a very lovely and bubbly female minifigure with its slight freckled wide grin smile. I will definitely like to use her as a medieval villager since her outfit is rather suited in that era. Parts assortment I really wish to see her holding a mug of beer, but perhaps it is not recommended to be seen at her hand since TLG's general target audience is the children. Her hairpiece is a new lovely ponytail design and you can enjoy the beautiful sight right from her back. The green and white apron is made up of cloth piece which is similar to the past recent cloth skirt pieces like the Series 8, Fairy. The pretzel is still a nice repetitive accessory which is first seen with the Series 8, Lederhosen Guy. Will you like to have some delicious pretzels? Forest Friends 4) The nasty Evil Mech Evil space villains welcomed a new addition into the space family and able to match up with the first Series 9, Battle Mech. This nasty looking evil mech is more cold looking and it is randomly rumoured to be associated with the Classic Space villain, Blacktron. It does not look friendly and certainly pose a threat to many others. Parts assortment The parts assortment is decent and even though I am really glad that this Evil Mech come with a space weapon but I did not expect to see a loud hailer and a illuminate green cone to form the space blaster. I am more hoping to see a complete new design of the weapon to increase the space weaponry assortment. After you have removed the Evil Mech's helmet off, you will be able to notice the green looking robotic head with all of the laser targeting markings and range on the visual lens. There are nice detailed printing which can be found at the side, while at the back revealed his large jet-pack that enable him to manoeuvre freely above ground. Taking the Evil Mech's armour off Space Rivals Space Factions 5) The fearsome Tiki Warrior The fearsome looking Tiki Warrior is my favourite character of the lot, simply because it re-introduce the presence of Classic Pirates, Islanders. It is also a magnificent design of a total re-creation of this defender of its native tribe which will be seen in some illustrative images below. I could see this character being very popular among Castle and Pirates fans, and more importantly you will soon be able to understand the key reason of its popular artificial demand. Parts assortment The parts assortment is very good and if I will like to improve it further, I will certainly like to see an inclusion of a newly designed shield. The giant face mask is made up of soft-medium rubber material and the paint detail is excellent. Not only to mention that they have re-introduced the Islander's hairstyle. You will be able to observe greater details from the side view. You are my protector Meet the Tribal Warriors Tribal Warriors lining up A little modification to the Tiki Warrior Protect our villagers from danger 6) The yummy Gingerbread Man This minifigure will certainly make lots of people smile, and I myself included. The yummy Gingerbread Man is a very delicious biscuit or cookie which is baked for special festive occasions.It even have its own fairytale story. I will be very most tempted to dip it into a glass of milk, but fortunately this is inedible and it will probably be good to leave it intact. Parts assortment The parts assortment is pretty neat and the design to create the Gingerbread Man is amazing. It has the height of the regular LEGO minifigure and yet it has a very unique body constitution which can be seen from the side and the back. The headpiece is a flat circular structure which enable him to lie just flat on the oven stove for baking. The colourings of the facial exp<b></b>ressions, buttons and legs are equally impressive. To be honest, I can't find much flaw in this design and I think this is one of the nice design in this new series. The red mug with the print, 'Dunk Me' is equally great and such mug designs are always much preferred than just mono looking ones. Dunk Me! Don't eat me LEGO Fairytales 7) The festive Holiday Elf Holiday Elf are great helpers to Santa Clause. Because without their hardwork, children from all over the world will not have Christmas presents. Therefore, this festive dwarf-looking Elf is on a mission to pack and wrap presents for Santa Clause and it is definitely a nice minifigure to add into the seasonal characters together for celebration. Parts assortment The parts assortment is nice especially with the 2x2 printed gift wrap tile which proved to be versatile for many other building purposes. A different teddy bear colour shade is also nice to be included with this minifigure as it created more gift variations. As you can see from the side and the back, you will notice that the elvish ears are attached to the green hat. Christmas Gifts Where shall I wrap you in? Working very hard for Christmas 8) The elusive Yeti The elusive Yeti or commonly known as the Abominable Snowman may not be a myth afterall especially since the TLG designers have managed to capture such cute lovely looking Yeti instead. When I first see the possibility of this character appearing, I wondered how it will look like. To my expectations, the Yeti is unbelievably adorable which could be inappropriate for some and since this is also not a costume minifigure, then I believe the usage of it as a practical joke will be rather real to our LEGO minifigures. Parts assortment The parts assortment is decent and the new blue ice cream stick is welcoming. You can observe the white fur on the torso and legs and along with the brand new headpiece for the Yeti facial exp<b></b>ression. The back view reveal the different layers of furs that depict the Yeti's iconic feature. Run for our lives!!! 9) The adventurous Mountain Climber The adventurous Mountain Climber is a professional high risk taker that challenge high altitudes right to the top of the summit. Apparently, he is well-trained with his trusty equipment gear including those mountain carbines that are seen at the waist. His specialised profession is medical expertise and I trust he is able to assist others since he bear the proficiency badge that will readily available to help his team mates and others. Parts assortment The parts assortment is not too bad and the equipment of the mountain climber is pretty good too especially with the new rope that will assist him in the climbing expedition. His availability will serve useful mountaineer expeditions. Climbing up with bit by bit Fear of heights??? You will be our medic specialist 10) The industrial Welder The Welder works hard in the strenuous tough environment of many industries where welding expertise is required. Welding can be considered a dangerous specialised profession where safety has to be considered and applied at the highest personal protection level. Without those personal protection equipment in place, it will put the Welder in a vulnerable position that will compromise his safety. Parts assortment The parts assortment is good and you will be able to observe the good selection of his welding equipment that make up of the following welding components including the printed flammable 1x1 orange cylinder bottle. He also donned in his protective long sleeve jackets and heavy duty leather gloves together with his wielding helmet to protect his eyes against from high UV light. I am tired after an intense day of work Assembling the Robot together Shall we head to Jim's bar for a drink? 11) The analytical Scientist The analytical Scientist will always review the test results carefully before proceeding further, likewise with her many unknown chemical substances that are available at her disposal. She will be able to mix different chemicals together to form many different possibilities that will assist in her research. It is welcoming to see a female Scientist joining into the City civilians population. Parts assortment The parts assortment are not too bad especially when there are two new viral bottles in light blue and green chemical liquids. Her clean white outfit also match her profession well and I will also suggest to use it for other medical professions as well since their attire is relatively similar to one another. On another note, I have to take a very close look and realised that this Scientist is known as Professor C.Sodin. I could be wrong since my eyesight is getting much poorer. Therefore, it is definitely not quite regarded as a research assistant. Different sort of scientists DO exist 12) The slick Jazz Musician Aww, he looks real slick just like the Blue Brothers. His black cool outfit and his killing saxophone could just blow your mind away. I could recall fans hoping to see a Jazz Musician like himself and include him in a 'live' band for Jazz music coverage. It will definitely be a stunning sight. I am already thinking of some possible fun settings for him to perform. Parts assortment Everyone will like to zoom into the saxophone since this is one of the highly anticipated accessory in this Series. The design of the saxophone is highly detailed with its pearl gold colour. This will enhance the musical bands by placing more of such instruments into playing. As for the rest, his black attire is suitable and able to integrate as a regular City civilian Men in Black 13) The friendly Diner Waitress The friendly Diner Waitress is an iconic sight back in the United States, during the 1950s where you will be able to find them serving the dining customers at the diners by moving up and forth with the roller skates. The waitress are able to serve their orders with speed and ease through the roller skates. There are lots of balancing to be involved but firstly balancing yourself, followed by the order. Parts assortment The parts assortment is decent and the outfit certainly look pretty retro as well. You are able to see theback view of her in skates before she rolled off with the strawberry ice cream float order. As you looked closely into her uniform, you will notice that her name is called Tara and this is another fine secret teasing facts of the design team which are incorporated into the minifigure's design. The front of the LEGO Service Industry Can I be on your team? 14) The kind Grandma After seeing the first appearance of Series 10, Grandpa, I am already hoping for a Grandma to be accompanying our dear Grandpa. True enough without a long wait, the kind Grandma make its appearance into this series with many fine detailed features. I find it very heart warming to see TLG to able to create Grandparents into the LEGO family. Parts assortment Apart from the usual picnic basket, you will find a nice new animal cat that make a fine companion to Grandma and personally I find it to be well designed. You will also notice that Grandma's knitted sweater also revealed several cat's printing near its waistline. The back view also reveal Grandma's grey looking hairdo. Visiting Grandma Meow Meow and Woof Woof Both of them are still close as ever Grandparents are always such a great inspiration to our lives... 15) The dutiful Constable One look and you will know this Constable is doing his rounds in his No.1 Uniform in the United Kingdom even though it is quite uncommon for the law enforcers to be wearing this uniform in present times. It is very welcoming to see him appearing as part of the LEGO minifigures community. I am pretty fond of his moustache on his look which is deemed iconic as well. I could not find any flaws in it and the design is spot-on. Parts assortment The parts assortment is good and the baton is wonderful new accessory addition. You can see how the Constable able to grip his baton tightly at his hand. The custodian ('bobby') helmet is done in a very nice manner as well too and I am very pleased with it too. Apparently his badge indicates JCF and his collar ID number is 1337. I really wondered what does that mean. Anyone can enlighten me a little? Law Enforcers in the LEGO City and Town The iconic British characters 16) The caring Lady Robot I did not expect to see a female companion for our Series 6, Clockwork Robot and I don't really think it is necessary to create this design. It is a lovely design but I am not very fond of it and used it for other intended purposes than to place it by his side. I am sure it does appeal to fans who enjoy a good retro 1950s looking robots as a form of variation and as far as my limited memory could recall, I don't quite remember seeing a female robot version. I could be wrong. Well, to me, the Lady Robot will be my least favourite among the 16 new minifigures. Parts assortment The parts assortment is mediocre and there are no other accessory which can be held by her hand. At least, give her some equipment to hold onto, other than just empty hands. The design of the back view is the same approach as the Clockwork Robot which allow the robots to wind up its potential energy. The robotic duo Robotic Sidekicks A concluding thought for the Collectable Minifigures Series 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11 Let's take a moment and view this awesome super big family group image which I have assembled for your viewing pleasure! It is getting a little less comfortable and more complicated to assemble all of these LEGO CMFs within a 48x48 grey baseplate. It will be even more challenging for me to squeeze the next new series within this fixed boundaries but I am confident that I will be able to find a solution to it when the time comes. So, what do you think and feel of this entire LEGO CMFs with everything being presented in this image? In my case, it is simply amazing with tremendous loads of excitement to see this entire LEGO CMFs theme altogether. I fully understand that some of us are feeling very exhausted and tiring to continue collecting this theme as TLG has been releasing at a very fast pace since the year 2010 and it have revamped and given a new meaning of collecting these minifigures especially when one of each of this is simply a new identity of its own where there are so many new possibilities that have been created in just a single theme that is proudly a TLG's own unique product range. I will love to see this continue and wish TLG to strive harder to actively promote this LEGO CMFs as we moved on. I hope this will continue to serve as one of the landmark themes within TLG to reach out more LEGO collectors and fans of all ages because I am very confident that there is definitely one minifigure out there in each series that you will adore most. Now with a total of 176 minifigures released for the entire Series 1 to 11, not including Mr.Gold which unfortunately I do not have the blessings to own it and the recent acquired Toy Soldier that can only be obtained through The Minifigures Character Encylopedia. It is no easy feat to be able to collect this entire theme especially when you have joined the parade much later where Series 1 and 2 are limited in numbers on a global scale. Although I have taken a long time to put these minifigures together for a new group image, but I have definitely and surely enjoy this process that is considered tremendously a lots of minifigures to be seen and is no easy feat to attain and to complete. Every time, I do this step, it is always very incredible to see how much and how far this theme had evolved to a greater magnificent transformation that formed a new pillar which formed the new blocks of LEGO products range. With Series 11 releasing soon, I am still quite unsure whether if we will see any Series 12 in the near future. I hope there is and we will be ready for the future LEGO CMFs Series. All in all, my wish is to be able to see this magical theme to continue wave after wave in every new calendar year. General Statistics for Minifigures Series 11 Below is the combination which I have received from my box, 4 Barbarians 2 Scarecrows 2 Bavarian Ladies 4 Evil Mechs 2 Tiki Warriors 4 Gingerbread Men 4 Holiday Elves 6 Yetis 6 Mountain Climbers 6 Welders 4 Scientists 2 Jazz Musicians 2 Diner Waitresses 2 Grandmas 6 Constables 4 Lady Robots Based on the above distribution, I have managed to achieve only two full complete sets of 16 one-of-a kind minifigures each. It means I will have 28 remaining random spares left. Read down to find out what are the remaining spares I have. My remaining spares 2 Barbarians 0 Scarecrows 0 Bavarian Ladies 2 Evil Mechs 0 Tiki Warriors 2 Gingerbread Men 2 Holiday Elves 4 Yetis 4 Mountain Climbers 4 Welders 2 Scientists 0 Jazz Musicians 0 Diner Waitresses 0 Grandmas 4 Constables 2 Lady Robots Data Analysis Based on the complete new data which I have complied, I have indicated my basic analysis based on my own take. Buying one full complete MISB box will allow you to achieve two maximum complete unique sets. I believe this is the new distribution which is being considered for a full box of 30 since TLG is intending to market the LEGO CMFs series with effect of the recent Series 9 to be sold in a box of 30 and 60 to market and reach out to new and different group of consumers. Therefore, if you are buying a box of 30, you will definitely be given a full complete set, while a box of 60 will certainly give you 2 complete set. On a personal note, I do not quite like the way the new distribution is being configured, not because of the given completed series for a full MISB box. I felt the allocation for the minifigures types is not quite the way I will like it to have. It is because there are not many filers minifigures under the group of six, like the Welders, Mountain Climbers and Yetis. I am not pleased to see these minifigures types to be given with a higher frequency. The only little consolation is the nice looking Constable being given the group of six treatment but still, I will prefer to see the Barbarian or the Tiki Warriors instead to be given a better distribution treatment. So far, each of the 16 unique collectable minifigures have an equal chance of getting 2 out of 32 packets, when a fresh untouched box is opened and consumers will rush in to buy it separately. That will be a 6.25% probability based only on 32 packets. When you add the remaining 28 spares into the calculation, the probability will varies further. 6 unique minifigures are now only available at 12 out of 60 packets and this translates to 20% in total and 3.33% each, which makes it very much harder than before to achieve by just doing it randomly. However, it is a great pity that the Tiki Warriors and the Scarecrows are classified as the lowest probability distribution point since there are only two each in each sealed box. The Tiki Warrior maybe classified as a potential army builder minifigure since it is closely related with the Classic Pirates, Islanders theme but I am not quite sure if it will be the most expensive minifigure in Series 11 even though it might be a very popular choice but definitely not as popular as its predecessors like the Series 2, Spartan or Series 3 Elf. There are lesser army building minifigures choices in this Series and the other likely potential ones will be the Barbarian and the rest of it will probably be good with just a few of them since this series is much inclined towards the City settings. I am neutral with the rest of the distribution and I really wish that some of the lowest probability distribution point like the Jazz Musician, Scarecrow and Grandma can be given slightly more in quantities . Overall, I am not very upset with the way in how the LEGO Collectable Minifigures distribution listing is being done but I am definitely not quite pleased about it. What do you guys think about this round of distribution? Do you share my same sentiments? To conclude and summaries, based on the probability demonstrated by this review, as an example, here are the results, Very High probability 1) Yetis 2) Mountain Climbers 3) Welders 4) Constables Total range: 40% (increases by 15% more based on 3 complete sets equation) Each: 10% Medium probability 1) Barbarians 2) Evil Mechs 3) Gingerbread Men 4) Holiday Elves 5) Scientists 6) Lady Robots Total range: 40% (remains the same based on 3 complete sets equation) Each: 6.67% Very Low probability 1) Scarecrows 2) Bavarian Ladies 3) Tiki Warriors 4) Jazz Musicians 5) Diner Waitresses 6) Grandmas Total range: 20% (decreases by 15% less based on 3 complete sets equation) Each 3.33% Some of my close-up images of my current LEGO Collectable Minifigures Series collection To conclude, the LEGO Collectable Minifigures Series 11 has done a good job to introduce more new minifigures into the LEGO CMFs theme that has reached another new heights. Perhaps, I felt that Series 11 did not create a larger hype other than not seeing the leaks earlier, but it does not create the greater hype due to lack of 'Where is Mr.Gold?' campaign or equivalent which is first revealed in Series 10. To me, that is a good news and it avoided unnecessary distractions which caused quite an uproar in hunting Mr.Gold. In this new Series, I noticed that there are more City related designs and professions than any other playing themes. The best thing about this new Series is to be able to see the new Yeti, Gingerbread Man and Welder which are totally a new designing concept that have never been seen before. It is no easy feat to be able to work on a continuous tight schedule and able to design and deliver new LEGO Minifigures with their wonderful pool of ideas which is obtained by many inspirations. I am confident that the imagination for creativity in the TLG CMFs design team will always be strong. This is also the only single avenue where we can see many exciting new minifigures at one go that can never be achieve in the regular LEGO theme releases where stand-alone minifigure concept is not possible where the theme revolve around it. Overall, I find this series to be a little weaker than its predecessors similar to Series 8, but I am not complaining that this series is not living up to my expectations as each of these new minifigure's design will be sought for by every different LEGO fans. Please note that the LEGO Collectable Minifigures Series 11 do not contain the placement of LEGO spare parts/accessories. This was practiced since the start of LEGO Collectable Minifigures Series 3. Summary review Playability: 8/10 (Many more new LEGO Collectable Minifigures integration across many new and existing themes.) Design: 8.5/10 (Good detailed and limited new LEGO minifigures' parts and accessories with more endless incredible accessories like the new cat, saxophone, baton, etc.) Price: 8/10 (I believe pricing will remain the same and to me, the quality has certainly improved on overall.) Overall: 8.2/10 (Another high rating for the LEGO CMFs and it is definitely worth buying and collecting these new minifigures.) I gave it a "5" based on my Review Score Card. What about yours? I hope every one of you enjoyed reading this simple review of mine. Comments and Criticisms are strongly welcomed. Pictures can be found in My Flickr and My Brickshelf (When moderated) If you are interested to read the past LEGO Collectable Minifigures Series reviews, you may find the following links below! 8683: Collectable Minifigures Series 1 8684: Collectable Minifigures Series 2 8803: Collectable Minifigures Series 3 8804: Collectable Minifigures Series 4 8805: Collectable Minifigures Series 5 8827: Collectable Minifigures Series 6 8831: Collectable Minifigures Series 7 8833: Collectable Minifigures Series 8 71000: Collectable Minifigures Series 9 71001: Collectable Minifigures Series 10 The LEGO Collectable Minifigures Series 11 will be launching on the 1st August 2013 or 1st September 2013 (worldwide)

Hello i'm new here

Hi there, Click here to download the building instructions on my website! It has been a while since my last GBC. But I have made a new one with new modules in it;) Click here to watch the video on my website with more information etc.: Here's some information about the LEGO GBC 8. To download the building instructions and watch the pictures, please visit my website: http://pv-productions.com/lego-gbc-8/ This time I used over 2000 LEGO pieces. I used 2 XL motors. One for all the modules and one for the airpump. I also used the LEGO NXT to control the LEGO GBC with your smartphone, so you can wireless turn it off and on again. You can also control the GBC with a mechanical switch. I also used the LEGO NXT for measuring data for more details. So now you can see the balls that have passed by, the average amount of balls per second and a clock to see how long the GBC is running. The mechanisms and functions, which I used, do not all have names. So I named them again by function. 1. Stop-go mechanism 1: Stops balls and let them go by at the right time. 2. Sinusoid: Moves the balls by making a sinusoid motion. 3. Stop-go mechanism 2: Stops balls and let them go by at the right time. 4. Elevator: Lifts the balls to a higher level. Every time 3 balls can fit in the cabin. 5. Bridge: Leads the balls of yellow tower to the blue tower. When the elevator(4.) is down the bridge will go up and when the elevator is up the bridge is down. 6. Stop-go mechanism 3: Stops balls and let them go by at the right time. 7. Vertical pushers: Pushes the balls in a vertical way up. 8. Color sensor: takes measurements of the balls. 9. Ball pump: Pumps every time one ball. A new ball takes a place beneath another ball and then pushes them up. 10. Android app: Controls the LEGO GBC Website: http://pv-productions.com/ Facebook: https://www.facebook...206638589482664 Youtube: http://www.youtube.c...op?feature=mhee Support site: http://lego.cuusoo.c...deas/view/51642

Glycon, The Viper Tongue by Toto Hermanto, on Flickr

-

Hi there, I previously posted the LEGO GBC 8 but now, after a week, the supportpage of the project is finally published. So, support the project if you want. Thanks. Click here to download the building instructions on my website! Click here to watch the video on my website with more information about mechanisms, programms, buildinginstructions, music I used, etc etc : Here's some information about the LEGO GBC 8. To download the building instructions and watch the pictures, please visit my website: http://pv-productions.com/lego-gbc-8/ Bron: Geek.com This is not GBC builder Philip Verbeek’s first outing with the concept — he’s on his 8th GBC build. Some of the past ones have included ball launchers, ramps, elevators, grabbing claws, and more. This time Verbeek has gone for a very ambitious build consisting of elevators, moving ramps, and a crazy undulating bridge. He’s also incorporated Lego NXT that allows him to track data about system performance and control the whole thing with an Android app. This new GBC consists of about 2,000 pieces, which is fewer than some previous builds. The contraption is powered by 2 XL Legomotors — one for all the modules, and one for the airpump. The mechanical energy from the motor is transmitted to most of the modules via gears or a network of strings woven through the blocks. Possibly the coolest aspect of this GBC is the Sinusoid ramp at the beginning. Watching it undulate while suspended by a network of strings its kind of mind boggling. It must have taken a good long time to get it timed correctly. Verbeek has also been kind enough to give us a walkthrough of the design. You can follow along with the gallery above to see each module up close. Stop-go mechanism 1: Stops balls and let them go by at the right time. Sinusoid: Moves the balls by making a sinusoid motion. Stop-go mechanism 2: Stops balls and let them go by at the right time. Elevator: Lifts the balls to a higher level. Every time 3 balls can fit in the cabin. Bridge: Leads the balls of yellow tower to the blue tower. When the elevator is down the bridge will go up and when the elevator is up the bridge is down. Stop-go mechanism 3: Stops balls and let them go by at the right time. Vertical pushers: Pushes the balls in a vertical way up. Color sensor: takes measurements of the balls. Ball pump: Pumps every time one ball. A new ball takes a place beneath another ball and then pushes them up. Android app: Controls the LEGO GBC. If you think you have the time and patience to assemble your own GBC with near-clockwork precision, Verbeek has made the plans available to download. It’s also on Lego’s Cuusoo page, if you think it’s worth supporting. Maybe Lego will finally make one of the GBCs a reality? You can also track Verbeek’s projects on Facebook and his YouTube channel. Website: http://pv-productions.com/ Facebook: https://www.facebook...206638589482664 Youtube: http://www.youtube.c...op?feature=mhee Support site: http://lego.cuusoo.c...deas/view/51642

Widowson-class Courier by TenorPenny, on Flickr Widowson-class Courier by TenorPenny, on Flickr Widowson-class Courier by TenorPenny, on Flickr A Dutch design, the Widowson space frame was constructed as a pleasurecraft, originally, marketed at the super-rich seeking something more stylish than a shuttle, and smaller than a yacht. The stock model is decidedly average in the performance stakes, slow to accelerate and of limited top speed. Desperate to elevate the appeal, the Dutch makers paid a fair sum of cash to have the Widowson placed into a modern action holo-vid, with astounding results. Sales skyrocketed, and soon unlicensed engine augments and upgrades were being released onto the market, with young rich kids and oligarchs paying large sums to have their Widowsons "overclocked". After upgrade, the ship could reach sublight speeds unheard of by other ships of it's class. Illegal racing circuits sprang up, with the racers pushing their ships closer and closer to the edge. Some pilots even died in their attempts to win, only adding to the mystique and attraction to Widowson circuits. Crew: 1-3. Armament: Stock: None. (After upgrades: wild variations.) Engines: Utrect 640-combination. (After market kits: variable.) Computer: Personal Data Engine, 2.3.

Hi everyone !!! This is my first post My name is Raúl, I'm from Lima - Perú (South America, Machu Pichu hehehe) I'm a Lego HARDCORE fan. In Perú, Lego is VERY expensive (twice as expensive as Europe) and very limited support, but with tons of effort we can build some dioramas hehehe This is my second diorama. It's an expo in Lima (october 26th), and was a little expo but very significative. Album in flickr: Take care See you soon El Pirotecnico PD: Sorry for my bad english

Hi all, A while back I posted my medieval abbey in this forum. Thanks to everyone who posted there, sorry if I didn't reply to specific questions but I was away at the show and since I came back I have been away a lot with work. I am hoping that this time I can respond to questions in this thread! As I mentioned the abbey was part of a collaborative display created by 8 builders (names are Flickr links): James Pegrum, Barney Main, Luke Hutchinson, Harry Russell, Steve Snasdell, Jimmy Clynche, Tom Coleman and your humble narrator. This display was on show at the Great Western Lego Show in Swindon, which took place in October 2013. The display was approximately 4m by 5m, and due to a cutout area measured 14m2. Although most of us had never met before in person, we had great fun displaying it and enjoyed our weekend. We might even do another display at future shows! Below are a few photos, although a few more will be appearing in the coming days. There will eventually be [Prev] and [Next] links on every photo to take you through them (42 'official' photos) but we are waiting on a few people posting theirs so please be patient! This time I promise I will answer any relevant questions 8 Display from South by Cuahchic, on Flickr 1 Display from South-East by Cuahchic, on Flickr 5 Town Square From Above by Cuahchic, on Flickr 9 - Overall view of Tigelfah by peggyjdb, on Flickr 1 Tigelfah Castle and town by peggyjdb, on Flickr 8. The land of Tigelfah by Invicta Bricks, on Flickr 1. Overview of the Town & Abbey of Tigelfáh by Invicta Bricks, on Flickr

Just a quick, yet surprisingly complicated build. I’m rather happy with how it turned out; it’s simple but it works and I think it looks great. Really, I’m just using this as a test run before I eventually make a micro Barad-dûr; which I intend to use the cool Palantiri head for the eye once it’s released (See it here! I called it! No one can use it! ). Regardless, I’m happy with my Orthanc, especially with the spires which use Venom’s new back piece to hold them in place. Enjoy ~Nemo

Captain America vs Red Skull The Star-Spangled Superhero takes down the Red-Headed Menace of Deutschland! Featuring a Custom printed Red Skull head by Christo; given to me in a trade with RaincloudDustbin. Thanks man! Enjoy! ~Nemo

A man participating in holiday festivities realizes he is in danger from forces beyond his reckoning... This is my first attempt at a horror-type film. While I am pleased with the result, there are (as always) places for improvement. Comments, constructive criticism, and suggestions for the future are most welcome. Please enjoy Predation!

The Dark Thunder by Kosmas Santosa, on Flickr This is my first moc post in EB, I have read the rules but still if I'm doing anything forbidden or wrong please let me know :) The Story: The rider's name is Chris aka Wrench, he is a brilliant mechanic and the one who made the bike. It was made a year after his wife and 5 years old only son died in a horrible event. He made this hoping to find new purpose and bury his deep torturing grieved by going to new places and finding new challenges. The bike itself are made to endure long journey and various terrain and made with a very strong yet light material main chassis which is great as the main based in case there will be needed custom necessity for the bike to be added in the future. The name 'Dark Thunder' came from the extremely loud and intimidating sound of the bike that you can recognize miles away, for sure it can be a good news for his friends and a very bad news for his enemy when they heard the sound of the Dark Thunder. === The Build: I build this actually for an entry of BrickFanatics moc MF Vehicle Madness, which you can find in here: http://www.flickr.com/photos/kosmassantosa/10273153116/ It is build to fit a regular minifigure without any modification technique on the minifig to sit there. Since it's minifigs size so I still can reuse this moc to fit and fill my Lego city's street...yippeee :) === My Flickr Page: http://www.flickr.co.../kosmassantosa/ *still failed to insert links in my signature :(

Going back to an original design idea and not a remake now, I wanted to this time build something small but agile, that could seat two people. A bit of inspiration actually came from Star Trek Nemesis from those Scorpion attack fighters. I wanted to do something like that because as since it seats two people, you could see it being hijacked by some protagonists in order to get away from where they are being held captive, whether it be a base or a large ship. Out of all of it comes the Blacktron Insector. Space Shots

Rojolele by Toto Hermanto, on Flickr

Hey all, Here is the first backstory build for my character in GoH. This whole creation is dedicated to Luke Watkins, and his amazing techniques! Thank you so much for sharing them! Story: As Feren grew older, he felt the need for adventure. Time and time again he left for long periods of time on search for adventure, or on mission for his father, the Earl of Ancroft. Finally, his father gave him the biggest mission of them all.....take back the island of Marrock. Ever since the Earl had heard of some outlaws landing and populating the small island, his small island, he was itching to send some men to take Marrock back. Now he had the chance. He gave Feren a small detachment of troops, his chief archer Robin (also Feren's friend) to train more troops, and let him ask his friends. Feren excitedly wrote a letter to 2 of his best friends, Edvin and Lydia, who immediately replied in the positive. They arranged to meet at Lydia's cottage, Letholdus Cottage. When, Feren and his men were nearing the meeting place, his fine-tuned ear picked up the sounds of metal on metal. He and Robin rode ahead, with the 2 steeds for Feren's friends. When they arrived, they found Edvin and Lydia dueling.... Enjoy! For The Glory Of Avalonia!! Soli Deo Gloria! Matthew Oh

Recently I had the idea that I can use the camera while building. I decided to make a video with pictures taken during the build. I used the Canon EOS 550D and EOS Utility. First I built 42011. I made about 450 photos. This is the result of this operation: Another set was 42006 Excavator. In this case, I made a 1450 photos. The mistake I made ​​was half the battery. In the film, if you can not see when I take out the battery and Stand the tripod. Photos were taken at night with a fluorescent lamp. A little strange being built with the knowledge that the picture is taken every 5 sec and you have to take your hands :). Significantly increases the time to build if you shoot images. Here is the result: I think to build all the sets in this way. For sure I have to build 42000 and 9396. Here a link to my YouTube channel: http://www.youtube.com/user/sives1pwse Sorry for spelling errors

She's an alien starfighter with disguised form. Unlike human starfighters, the machinery, movement and mechanical is also designed differently. Please enjoy and feel free to leave any comment. Cassiopea by Toto Hermanto, on Flickr

Every Lego Star Wars fan has come across that one set that, while it may be good, could be better. This is a stream to share your modded Star Wars sets and ships, not for MOCs, but the sets in which you have decided to improve upon what's already there.

http://i44.tinypic.c...com/15ozcrn.jpg

-

MY MOST VALUABLE COLLECTORS ITEM :) ONLY 200 EVER MADE! :wub: :wub: