Search the Community
Showing results for tags 'Creator'.
Found 210 results
-
I built this little diner to fit into my Modular town. It occupies a single base plate and can serve as an end cap to a row of buildings, but has facades on three sides. To date, this is one of my favorite builds. A little close-up of the marquee: Ground level view of the restaurant: A little profile shot: And then the top came off! Plenty of seating inside: Hamburger, fries, milkshake, or a fresh slice of pie today? The staff is always friendly and helpful. There's always a hoppin' tune playing on the jukebox. Situated in a busy area of town: Thanks for looking! You can see additional pictures (with more details) in my Flickr gallery!
-
Having recently taken inspiration from SearchFunction's 'Living Small' builds, I have finally gotten around to finishing this MOC. It has been rebuilt a few times, reducing the size to try and get the scale right. I would be more happy with more detail on the interior but I am signing this off as finished, so I can move on to my next project. I present to you a Bungalow with Dormer. Currently resided in by Dave the Flower Cart seller. This building comprises of an enterance hall with stairs to the first floor. On the gorund floor, a spacious and well equipt kitchen leads you to the light and very large 'lounge diner', complete with french doors to the garden, bay window to the front, fireplace and an inviting bay window seat. Upstairs we have the large master suite, which has its own sizeable ensuite bathroom. It took me ages to get the roof to sit correctly. It is largely based on SearchFunctions plate design, however i have added some 2x2 tiles to try and get that slate roof effect. I did have skylights in one version of the second floor but it didnt give me much room to work with so I went with the dormers instead. Planning out the top floor was very tricky due to where the stairs came up and not eating into the bedroom too much with unnessecary walls and corridors. With regards to the large amount of Tan... this is what happens when you buy the Tower Bridge as your first set for building mocs with. Hey ho, it doesnt look too bad, Struggled with detailing the exterior, hopefully the next one will be better right? There are more pictures on my Flickr account. C&C always welcome and thats again to SearchFunction for the inspiration. LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr LEGO Bungalow with Dormer by Chris Brown, on Flickr
-
MOC: Masahiko (alternate build for 31032 Red Creatures)
gonzilla posted a topic in LEGO Historic Themes
Wasn't sure where else to post this, Historic seems like the best idea. Here's an alternate model for the 31032 Red Creatures set: Instructions can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=558155 -
Ever wonder where the minifigs are buying all those coffee mugs? My newest modular is a kitchen store: The first floor is the kitchen store.... Cooking classes are offered upstairs... Here it is next to the Fire Brigade and my candy store moc: Thanks for looking!
-
Hi everybody! :) I'm new to the forum and wanted to share my latest MOC, and in doing so I hope to start a discussion on the set that I've designed and I'm sure that there will be some really interesting dialogue as a result of this. To get something out of the way (and quickly), this set is my very first Lego Idea and as of today it is live - please support it if you think it has merit as a potential Lego set! Monster Miner / Wheel Loader And now, some reflection on the process that led to this model and some thoughts about Lego in general! I'm almost 33 years old and have been mad about Lego for as long as I remember. I love to create things with Lego, and for about 25 years now it's always been Technic-style diggers and cranes, sometimes other construction vehicles, all with functioning gear trains and realistic movements. I'd say that this set I'm sharing here today is the culmination of between 25 and 30 years of Lego experimentation and prototyping. and I just feel that every aspect of this set has "clicked" (pardon the pun) and I'm so happy finally to be able to include a little bit of everything in one big, imposing set. My thinking on Lego today is that there are many sets which don't look very Lego-like (certainly in the MOC realm), and I'm confused by that. Why conceal the medium that makes Lego what it is? With this model I decided to embrace Lego as an educational childs toy (which is what it is, first and foremost), so instead of concealing all the studs and making this more of a replica and less of a toy, I have tried to retain the inherent Lego-ness and sturdy playability of the exterior whilst presenting an equally impressive and more grown-up sort of "model" that would appeal to teenagers and even adults. Basically, it's Lego city, Lego Technic, Lego Model Team etc. rolled into one. Whether that works or not... is up to everybody else! So what do you folks think? Must Lego sets be "niche" products if they are to succeed as merchandise, or is it possible to stretch things a little and cater for more than one market with just one set? To put it another way, I reckon this is the set that I wanted to find in the pages of the 1990s Lego catalogues, especially at the back, in the Model Team section. That's why I built it. Is it just me, or is there intrinsic appeal in this sort of set that straddles the fence delineating different Lego lines? Here are some more pics which may or may not influence your input!
-
Hi, guys. My name is Wojtek (you spell it 'Voyteck'), I'm from Poland, born in the late '80s. Writer, game designer, text designer, enthusiast of various things like video games, speculative fiction, classic cars, bass guitars, music... I work at a game development company as that guy who creates various text related stuff ('Oh, you make games? So you must be a programmer!' 'No, ma'am, I write story and characters.' 'Oh, ok... Mighty fine weather, now isn't it?'), while at home I create a big S-F project containing novels, stories and a tabletop games. I'm also an AFoL that was rescued from the Dark Age by his girlfriend who started to gift some nice sets to him. My love for Lego was reborn and never was stronger (man, I need to un-dig the old sets!). When it comes to Lego, I won't shy away from neither building nor brooming and swooshing. My thing are mostly Creator and Technic sets and I build mostly vehicles of different kinds. I also like LDD, but I use it mostly to generate building guides for my more successful MOCs and to visualize stuff from my private project since my 3D soft skills are absolute zero, while my Lego-building skills are at least decent (I hope). Cheers!
-
From David Thomsen: -Sci Updated with pictures on 6 Nov 2014,
-
Creator is a weird beast of a series: mini-figure scale sets of different sizes, non-min-figure scale vehicles, and basically anything that qualifies as 'miscellaneous.' This year, one of the more colourful sets appearing in the line is Rainforest Animals. Let's take a look! Set#: 31031 Name: Rainforest Animals Theme: Creator Year: 2015 Pieces: 215 Minifigs: None MSP: U.S.$14.99 Peeron Brickset Bricklink The box The box is nothing surprising, the main model, with the two alternates on the side. At a glance, the shades of green used are really attractive. It jumps out off of the shelf, especially compared to a lot of the other Creator sets, which tend to have a lot more sky blue shown. The back of the box shows the 'action' features, such as they are. They will be shown in depth as the review goes on. The booklets The books have images based on the box set. They are cleanly designed with the requisite ads and piece list in the back. The Pieces The set is relatively small, and outside the googly eye printed pieces, nothing was particularly surprising. I love the colours though. The greens are lush. Build One: the piraña The base of the fish is solid, no hollow space in this build. The set(s) uses pieces in an unusual way in places. The bridge of the nose at the front uses two of the pivoting pieces that are normally used for doors and such are stacked and used only to get a nice texture to the front of the fish. Those sorts of irregular piece usage separates professional Lego builds from amateur ones. And a few steps later, it's finished! It's not a complicated build, but it is very, very economical and polished. The fins are solid and don't flop around. The base is stable, it won't fall over. I like the curves on it. It cuts a nice silhouette. And one from behind, for completionists. Build Two: Chameleon The second build is the chameleon. The base of it is solid as the piraña is. It's quite a chunky thing. I think the colours are a little more random than in the piraña, but nature is like that, and the three shades of green play well off of each other. The legs are put on, and I think they work better than they should. The feet are just stacked corner pieces. It works though, and they are very stable. The ability of the head to tilt is smartly restricted. It keeps it from going to unnatural positions. An unused hinge keeps it from flopping down too much. This is my favourite model of the three. It's got a funky quality to it. Build Three: Parrot/frog/fly The fly is a very simple build, and cute too. Next is the frog. Again, not too many steps. The hinged back feet are a clever design. The final frog is pretty nice, and has one action feature: A gaping maw. The shape of the big green slope is very close to an actual frog's shape. Could that be its original purpose? The third build is the parrot. At first I was a little baffled by it. Where is everything going to go? Unlike the other two, this thing is hollow... But there is a purpose for this! Turns out the next step solves a little mystery. The horizontal set is turned up, and feet are put on. The next steps build a very well designed head, that snaps on top. This kind of reminds me of the parrot from those Three Caballeros cartoons. Anyway, he's built, and he's a beaut. Of the three, this definitely uses the colours the best. The wings look surprisingly organic, and can splay out like a real bird's might. And go back. This is the weird thing. The head tilts back so you can feed it, as seen on the box. The set comes with four little beige pellets. So why was the inside hollow? Well, the tail pops up and... The bird poops? I guess that's what they're going for. It's interesting, anyway. So that's the third build. It uses a majority of the pieces, and is the one with the most natural colour scheme. The Final Verdict Design: 10/10 I have to review this on what it is: a set under $15 with multiple builds. It's not mind blowing, but nowhere in the set does anything rub the wrong way. The proportions seem right, except possibly the fly. Build: 7/10 It's not boring, but it's not anything I've never done. The parrots feet are interesting, and I like seeing the snot techniques in the build. Playability: 8/10 The fish isn't playable at all. But the piraña, parrot and frog are posable. And kids love things with pooping action. Price: 10/10 I thought this was $30 at first, but upon checking, no, it's $15. I thought $30 would be reasonable, but at $15, it's a good deal. And I love all the colourful, curved slope pieces in the set. Overall: 9/10 This is a solid set, not a must have, but a set that shows what a creative, smart toy Lego can be, away from licenses and flick fire missiles. I would recommend this as a present for any young person. So, it's good. My personal favourite build was the chameleon, and my daughter liked it too, using it as a dragon to fight with Mario, until she smashed it into oblivion. It unlocked her imagination, and that's what this stuff is all about, right?
-
Hi, It's my new Friend. Happy Doggie from Lego 31019 (Forest Animals).
-
2015 LEGO CREATOR Houses Sets Click for more high-resolution images on flickr. 31035 Beach Hut 31036 Toy & Grocery Shop
-
A wise man once said: "The future is what you make it." And what better way to create the future than to build it out of Lego! Since TLG always strives to inspire the builders of tomorrow, it is only fitting to make one of their Creator sets centered around futuristic vehicles. This 3-in-1 set gives us a glimpse into a possible future with three different kinds of vehicles: a mech, a jet, and a car. But does this future look bright or is it a dystopian nightmare? Let's find out! Set Number: 31034 Name: Future Flyers Theme: Creator Year of Release: 2013 Pieces: 237 Minifigs: 0 Price: $24.99 / €19.99 / £17.99 S@H description: S@H Bricklink Brickset The Box The box art is the same as all the other recent Creator sets featuring a yellow sidebar with the 3-in-1 logo in the upper right corner and the two alternative models displayed in boxes below it. Since this copy of the set came straight from Lego's headquarters in Billund, this is the European version of the box as you can tell by the lack of a set name and part count. The main image depicts the giant robot landing in a desert setting. The sky looks very interesting as it transitions from day to night from the left side of the image to the right and there are some meteors flying overhead. Maybe this is supposed to be some kind of alien planet where such a thing as a half-day-half-night sky can exist. Or maybe it is supposed to indicate the passage of time, symbolizing the movement towards the future... or maybe I'm just reading too much into the background image. The top of the box features the inventory and a 1:1 scale picture using the robot's "eye" for reference. There isn't much on the back of the box. It only shows the 3 different models and a small picture that tells you that the robot's jetpack is detachable. On the right side you can see that this is the type of box that has two tabs which make it easier to open it. I miss these tabs. Why don't American boxes have these tabs anymore? I bet it's because of people ripping them open in stores and stealing their contents. You disappoint me, 'murica! Inside the box there are three instruction booklets, one for each alternate model, and two bags, one smaller than the other. There aren't really any rare parts parts included, however many of them are quite useful, such as the white curved slopes, trans. light blue parts, and big and small ball joints. Here is a random instructions page. The part call-outs and building steps are pretty clear and the light blue background provides a nice contrast to the illustrations. To build up suspense, I will be reviewing the models in order from smallest to largest, building up to the main model. So let's start with the Future Flyers model that is not a flyer at all: The Car The build of the car is pretty straight forward, but somewhat unconventional. The chassis is made up of some parts that would usually not be used for the base of a car, such as wedge plates, curved slopes, and that white boat hull piece. Next, the aforementioned seemingly random parts are covered up by various plates. I like the cylinders in the back here because they give the impression that they could be part of the engine. After about 40 steps, the car is finished. It looks quite nice and does have a somewhat futuristic feel, especially thanks to the trans-light-blue bits. It doesn't resemble any particular existing car, so I'm guessing it's supposed to be a concept car. This is especially evident by the double canopies which are reminiscent of concept cars like the Ford Futura (which later got turned into the 1966 Batmobile). However, I feel like it doesn't really fit into the theme of Future Flyers. I think it would have fit the theme much better if the designers would have made the wheels like the ones of the DeLorean or Nick Fury's car and thereby turned it into flying car. Of course that would have required hinges or other parts that this set doesn't include and I realize that this is just an alternate model, but I'm just nitpicking here. Hey, I think I just figured out what makes this car so futuristic! Look, it has no steering wheel! This here must be one o' them fancy new self-drivin' cars. Unlike the DeLorean, this car fits two minifigs comfortably. However, since the inside of the car is filled with those random pieces, they sit a bit a high. Thanks to all the curvy white slopes, the car has a nice aerodynamic profile. Looking at it from the front, you can see that a ball joint was used to add detail to the grill of the car which is an interesting choice. The back is fairly plain, but it looks quite good. I especially like the use of the light blue dishes as headlights. The only thing that bugs me a bit is the small gaps between the upper corners of the bumper and the fenders, but it's hardly noticeable. Thankfully this is a Creator set; otherwise there would have surely been a license plate sticker covering the 2x4 tile. The Jet Let us now move on to the second alternate model, the jet. Its construction is fairly normal, except that the wings are only attached by one stud. Also, note the Mixels ball joint at the front. I will be talking about it later. The build lasts about as long as that of the car and there are approximately the same amount of parts left over. The finished jet looks very nice and slick. It looks like a high-end jet, and it's a vehicle that is designed to fly, so unlike the car, it fits the Future Flyers theme very well. Here is a look at it from the front. I really like the design of the nose as it cleverly uses the Mixels joint that I pointed out earlier to attach the second sloped wedge part upside down to the bottom of the jet's hull. It looks very good from the side as well. The only things that look a bit off are the gap between the wings and the top part of the plane and the holes in the fins of the jet that are created by the arches, but I don't mind them too much. It has two engines in the back which are constructed using the wheels of the car. I am very happy with how this model came out and I would really like it if it weren't for the play feature. The designers of this set decided to make this a variable wing jet which is not a bad idea as it adds playability. Usually, variable wing jets sweep their wings backwards to increase their speed. But for some reason they chose to base this model on the rare type of jets that sweep their wings forward instead of backwards. I had not even heard of this forward design before and I am not a fan of it. I would have much preferred it if they would have used the swept-backwards wing design which could have easily been done by attaching the wings from the back instead of the front. The wings in the back and the fins can be tilted up and down as well. Here is a comparison of the two flight modes of the jet. To me, the one with the wings folded forward just looks weird, so I'll keep them in their default state. The Robot Now it's time for the main attraction! This is the model I was looking forward to the most, so I saved it for last. You start the build by constructing the robot's torso. Next, you build the arms and legs which can get a bit repetitive because each pair is almost the same. Lastly, you add the jetpack, the head, and the shoulder pads. The finished robot looks quite impressive. He has the same color scheme as the Mindstorms NXT robots which suits him nicely. His design kind of reminds me of a Transformer, like a mixture of Starscream and Soundwave from Transformers Prime. Kinda makes me wish it could transform into a jet without rebuilding it, but Lego probably wont make Transformers anytime soon. That translucent blue dish in his chest is reminiscent of Iron Man's arc reactor. The figure has some interesting proportions with its large hands and feet and it short torso. The wings can be folded up so that they are level. I personally prefer them angled like on the box art though. They can also be folded all the way down for when the robot isn't flying. The jetpack is only attached by a Technic axle to make it easy to remove it if you so wish, however it is stuck in the robot's back so firmly that it is hard to remove it without breaking off a few pieces. Also, as you can see here, the two rockets are only attached by a clip hinge which allows them to be tilted a bit. Not sure what the point of this is, but maybe it's to make them easily removable as well. In addition to the jetpack, the robot also has jet engines built into his feet to help him fly even faster. You can see them in the following picture where he is enjoying a break. What? Even giant crime-fighting robots need to relax every once in a while. The sides of the robot's feet are open so that you can see the jet engines inside which adds some nice detail. Also, there is a red plate with a rail on each foot to keep the knees from bending too far forward. As you can probably tell, the figure is a bit back-heavy, so you may need to lean him forward a bit. This figure has quite a lot of poseability, especially in the arms. The wrists can turn, and the upper legs, shoulders, elbows, and even the head are on ball joints, so you can make a wide variety of poses. And thanks to the shoulder pads being on clip hinges, they are never in the way of posing the arms. Here is the robot taking a fighting stance. Unfortunately, like most Lego mechs, he is missing some articulation in his feet, so you need to balance him on the tips of his toes when spreading his legs. Despite the lack of a hip joint, you can also achieve the overused Iron Man pose: Or if you're more into DC, you can have him do the Superman pose when he's flying. Here is a comparison with Build-A-Buzz, another buildable figure with a jetpack. The robot is about the same size as Buzz (if you don't count the helmet), but while he doesn't have turning hips like Buzz, he has a lot more articulation in his arms and head. Honestly, I wish the Mixels would have come out before the Toy Story sets because Buzz's poseability would have benefited greatly from those small ball joints. Ratings Design: 4/5 - The designs of all three models are pretty good. The robot looks cool and stylish, the jet is sleek, and the car looks sporty. I do have some nitpicks about each of them, like the non-articulated feet of the robot or the reversed variable wings of the jet, and I still don't feel like the car fits the theme of the set, but I get why it's included. Build: 4/5 - The builds are satisfying. It's not too challenging and doesn't take very long, but there are some interesting techniques and the dismantling and rebuilding of the set into the different alternate models will keep you busy for a little while. Playability: 5/5 - I'd say this set is quite playable. The robot has some of the best articulation I have seen in a Creator robot and all three of the models are very swooshable. Parts: 3/5 - Like in most Creator sets, there aren't many rare pieces here, but they are all quite useful, especially for the type of futuristic MOCs that this set is meant for. Price: 2/5 - This is the weakest aspect of the set. $25 for 237 pieces is pretty high, especially for a Creator set. Overall: 4/5 - This set is pretty good as far as 3-in-1 Creator sets go. The main model is great and the alternate models are pretty good too, albeit nothing really special. And it comes with some nice useful parts to boot. The only downside is the price, but I hear that Target has it for $20 which is much more fair, so if you can get it there or at a sale, I'd say pick one up, especially if you're a fan of robots/mechs. I hope you enjoyed this EB Reviewers Academy review. By the way, does anyone else feel like this set was inspired by a certain Collectable Minifigure?
-
A little urban renewal to transition the Detective Office part of town with the more classy modulars... my latest modular is "Chop", a small Asian fusion bistro in an Art Deco storefront. Oddly enough, I've wanted to use fish as an architectural element for a long time. 1st floor interior: Decorative wall panels. 2nd and 3rd floor feature a nice but somewhat cramped 2 bedroom aparment. Next to a couple of my other mocs. Thanks for looking! (Sorry the photography isn't great.)
-
Hi all, I had an idea to build this artwork for my wife as a present since she & her siblings traveled around in a T1 as a family, anyways my wife did not want it however I finished it all the same. Contains several rare parts, especially green, has been professionally framed using museum quality glass. I exhibited it at the recent Sydney Brick Show (Australia) with a great response, thousands of photos taken of it with most comments saying it is 'Cool'. The number plates are engraved along with the VW emblems (chrome plated then engraved) plus chrome plated tiles under the headlights & indicators - thanks to Auri @ Chrome Block City. Thanks to Andy Warhol for the inspiration. Thanks for looking - OMR PS - this is my first (and possibly only) artwork - I'm an Engineer who builds in Technic. :-) VW.artwork.5 by OneMoreRobot_NZ, on Flickr VW.artwork.2 by OneMoreRobot_NZ, on Flickr VW.artwork.3 by OneMoreRobot_NZ, on Flickr VW.artwork.4 by OneMoreRobot_NZ, on Flickr
-
Hi everyone. This is my conversion of the Lego Creator Palace Cinema into a gig venue for rock bands. The video details the current changes and future plans for the MOC. I hope you like the plan. I'll post updates as the internal features develop. Let me know if you have any ideas or comments. I'd love to hear from you. Thanks, Mike
-
Hey bro! Time to build birds! I prefer peacocks. ^^ Now, three boys are struggling to take this girl home. And here comes a winner. They since then live very happily~~~ ... until finally they are disassembled by me. LOL
-
At the moment I'm collecting a number of buildings together for a possible Lego City and these 2 are my latest buildings. They are expanded versions of the 2 buildings in the Lego Creator Bike Shop & Cafe set. .
-
Happy Valentine's Day! Here is my latest modular MOC - a Candy Store with an upstairs party room. The design is done in the style of an 1890s iron facade. It's only two stories, but not as small as my Florist and Lawyer's Office MOCs. The first floor Candy Store interior: 2nd Floor Party Room Interior: Next to Palace Cinema for comparison: Thanks for looking!
-
Deciding on a Lego House : Stop Motion Lego Creator Log Cabin #5766
omnipotent666 posted a topic in Brick Flicks & Comics
A stop motion video i made a little over a year ago while building all three variants provided in the instructions for the Lego Creator Log Cabin set #5766. The lumberjack does have a tough decision to make. -
2014 LEGO CREATOR Houses Sets Click for more high-resolution images on flickr. 31025 Mountain Hut 31026 Bike Shop & Café
-
Just wondering, has anyone heard whether TLG will release a second wave of 5 Mini Modulars just as they did for the first 5 modulars a number of years ago? I really enjoyed that set, almost as much as building their bigger brothers. Since we are now counting 10 modulars I can imagine the next 5 mini modulars are due...
-
Winter Village Express-- A new project at LEGO IDEAS-- Coming Soon!
James Mathis posted a topic in LEGO Train Tech
It's here! Or, rather, over there, at LEGO® IDEAS. Thanks for checking this train project out. If you like it, I'd appreciate your support vote at the IDEAS project page. If you don't like it, or might like it, let me know in the comments what you would have modified or added. with gratitude, James https://ideas.lego.com/projects/85295 Custom Winter Village™ LEGO® train project, arriving soon on track LEGO IDEAS™. Can you smell the coal, oil, steam, and pine? Can you feel the crisp chill in the air against the warm aroma of spiced cider and nutmeg atop a mug of nog? This project awaits approval, after which your support would be greatly appreciated to enable potential production and begin revenue service. Check back in about one week for additional "Winter Village Express" train project details and get your ticket to travel back in time on a winter holiday as this project goes "live" on LEGO IDEAS. "Tickets, please." ;-) Thanks for checking it out. sincerely, James Mathis -
Hey, I'am working on a Lego train and my layout is fine. It's now time to add houses and so on. I already have Creator house 4956 and 4886. They look fine and size looks good. I plan to buy modular to create a small city. I would like to know how modular will looks side Creator house. I also see some modular-like : 31026 Bike Shop & Cafe. I'am searching for pictures with Creator houses, modular and those modular-like. I would like to know if size match and if they can be mixed. Perhaps I don't use the good words to google for picts but I did not found such pictures. I found a picture form this topic but the viewing angle did not help to compare. PS : Sorry for my poor English. It doesn't help to search...
-
Hi everybody! I'm new to this forum and I want to show you my first Lego Idea: the Brandenburg Gate!! It comes with over 9000 pieces and it' really really detailed!! Here's a render of my project I need your support to transform this in a real Lego set!! Support me at https://ideas.lego.com/projects/87619 Thank you!!
-
It's a train, for a village, in the winter, or other scenic season. In case you don't visit the Train Tech forum, I'd like to announce this complementary themed train set for which I'd greatly appreciate your support vote over at LEGO IDEAS. Direct link to the Winter Village Express Train LEGO IDEAS project: link removed Cross-forum discussion link in Train Tech: http://www.eurobricks.com/forum/index.php?showtopic=102281#entry2053104 Looking forward to your likes and dislikes, suggestions, and opinions. Thanks for checking this out. James Mathis
-
Lego Creator 31007 alternate- RacingCar Thanks for watching! Peteris
