jasoriab

Thank you very much, the stud.io file is enough since I only needed the design of the 8-gun turret. My doubts were how you had joined the two rows of 4 cannons, and the total number of pieces each turret needs, both doubts already clarified. Originally the ISD Monarch mounts fixed turrets, although in my case I modified them so that they could rotate, in a design that I found on reddit, I upload a couple of photos of the modification, in case you are curious. As soon as I have the necessary parts, I will upload some photos of the result ;) Thank you very much again!

Hi Kdapt-Preacher first of all, I want to tell you that I love your designs, and I have already replicated some of them. I would like to change the turrets of my Monarch ISD to your ISD2 octuple-barrel turret design. I think it would look much better with them than with the ones that the Onecase MOC comes with. Do you have the PDF manual, the list of parts for one of them or the Studio file? I would like to try to see if they fit in the holes of the original ISD turrets. Thanks!!

Hi! No, I haven't started building the TIE Defender yet, I'm in the process of collecting bricks to use.

It's a project I want to build this year, so if the mods aren't too complex, and they show up clearly in the photos, it would be a good choice along with the instructions in Brick Vault. Do the current instructions include the stand? Could you add them as a separate file to the current instructions zip? And one last question, are you planning to add the Defender to The Perfect TIE Collection - Minifig Scale pack?

Hi @Jerac Returning to the thread, I would like to ask you if you have planned version 2 of the TIE Defender, applying similar changes that you have made in the Fighter and the Interceptor, new 4x4 top dish from 75300 T/F, stand, etc...

Thank you very much @bobs_cycle_shop for the detailed photos of the support for the ship. I already have an idea of how you have built it, and I will try to make a similar one for me. The use of technic liftarms L3 and L5 is a very good idea. This Is the Way. I really liked how the Razor Crest turned out with those pieces in BLO @azanderk Decided that I will not test how it looks with the pieces in yellow, as soon as the BLO pieces arrive at home I will mount them to the ship. Thanks for showing us the result. ;) You're welcome!

As @Jerachas given his approval to share it, here is the link to the list of parts needed to convert Tan to BLO in xml wanted list format for Bricklink https://mega.nz/file/XxFCSbZR#ylf6tYRfnoo6qsIdeRvc06lUq95gQ87x7KjpWUc385Q The pieces "Plate, Round Corner 3 x 3" if you want you can use the ones you already have in tan color, since the are not visible when mounted inside the panel, but I have included it so that the conversion to the BLO color of the front panels are complete. It is not a bad idea to buy some extra 1x1 and 1x2 plates, in case you want to modify the decoration in BLO by personalizing it. ;)

I have made a wanted list in bricklink of all the pieces that originally come in Tan color to order them in BLO, excluding those that are not visible because they are part of the internal structure of the ship. If @Jerac doesn't mind, I could share it here to make ordering easier.

I have had to order them all at Bricklink, I didn't have a single piece in BLO color.

I don't think it would be very complex to change the pieces to the new color, in two or three hours it would be done. I'll start on one side and change all the Tan pieces on that side to see how it looks. If the result is convincing, I'll do it on the other side.

I want to try two colors, one is yellow and the other the color that LEGO has used in the UCS, Bright Light Orange, to see what the result is, to replace the Tan color of the front part of the ship. The problem is that there is a specific piece that does not exist in yellow, so some areas of the Razor Crest would have to be redone. This part is: https://www.bricklink.com/v2/catalog/catalogitem.page?P=26604&C=3#T=C&C=86

Lego Razor Crest UCS 75331 building instructions are now available for download. https://www.lego.com/en-us/service/buildinginstructions/75331 They can serve as inspiration to further improve our beloved ship.

Hello @bobs_cycle_shop I've seen the photos of your Razor Crest mods and they look great. Congratulations!! I really liked the black stand on which the ship rests. Could you post some more detailed photos of him? Is it possible to build it with the parts from the stand @Jerac made for the Razor Crest? This way I would occupy much less space when exposing the ship. Also if you could upload some more photos of the cargo ramp with the actuators, and the parts you used for said actuators I would greatly appreciate it.

A new Razor Crest update with these mods posted by @Lfm55 and @bobs_cycle_shop would be great. Thank you very much @Jerac for offering to update your magnificent Razor Crest.

Hi @Jeffersc Could you put some photos of the lower part of the engines? I am very interested in seeing how you have done the lower zone (at 6 o'clock) to try to do something similar. Thanks a lot!!

OK @Redbird11 No problem for me to wait for you to finish these changes. Enjoy your vacation!

Hi @Redbird11 Could you detail the pieces I would need to eliminate the gaps between the wing gears? I am not clear on the references and the quantity of them that I would need. I'm a newbie to ship mods... Thanks!!

Hi Redbird11 I think the mods you have done to the imperial shuttle are magnificent. I would like to modify mine the same, adding the ramp and the landing gear. Could you send me the file with the instructions? Thank you very much in advance. Regards,