-
Content Count
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by ArtemyZotov
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Nope, the suspension hasn't been changed since the release at all. But you are right, the ground clearance on the renders was a bit higher (approx. 1mm). I've just compared it. My mistake in modeling (actually it's quite tricky to model the shocks with proper angle in 3D, as they are compressed in real life at idle position when it's not compressed in the software)- 19 replies
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey there, as you might already know, I released Maserati MC12 last year. But I only managed to publish the video review today (I lacked some white pieces previously) While preparing the video I have updated the gear-shift mechanism, because it caused the turning angle of the front wheel was limited. Scale: 1:8 Length x Width x Height: 63 x 28 x 15 cm Features: - V12 piston engine with rear-wheel drive - 6-speed sequential gearbox + N + R (neutral and 1 rear speed) - steering with working steering wheel - front and rear independent suspension - adjustable front suspension (a real MC12 feature as it has a long front bumper) - doors are supplied with shock absorbers which helps to hold the doors in open/close state. - removable trunk cover and roof You can find more photos on my BrickSafe page https://bricksafe.com/pages/ArtemyZotov/maserati-mc12-18/physical-build- 19 replies
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Unfortunately, I stll haven't had those shocks and thus I didn't consider them. But I'm sure there aren't enough room under the front cover to place them because of the little gaps and the suspension adjusting system. Thank you for your feedback! It really inspire me.- 19 replies
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The only one brand I gave my permission to sell my MC12 as set is LesDiy (I hope I won't be banned for mentioning it). I'm not sure if they have sub-brands, but I believe the most of those sets you saw are all stolen.- 19 replies
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
There are no details on that- 19 replies
-
[MOC] Maserati MC12 (1:8)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Thank you! But CaDA rejected this MOC.- 19 replies
-
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I don't know when it will be released, but I hope it will be this year. I have added motorization support (1 servo + 2 L motors + LED frontlights + LED taillights), changed lights to translucent, changed rims from black to chrome, reinforced roof, A-pillars and rear arches. You can find a photo of updated design on my Instagram. -
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Mazda RX-7 VeilSide Fortune from "The Fast And The Furious: Tokyo Drift" Hi all~ My English is not perfect, so I can't write long descriptions and you can find some information below. Scale: 1:8 [1:7,7 is more accurate value] Dimensions: 56x27x15 cm Weight: 2,5 kg Features: - Manual model (No RC and motorized functions) - Working rotary engine in 1:8 scale - 4-speed sequential transmission (one direction shifter: 1>2>3>4>1) - Steering with steering wheel - Full independent suspension (double wishbone) - Modular chassis - Openable doors, trunk and hood - Doors with locks Full photo gallery: https://bricksafe.com/pages/ArtemyZotov/mazda-rx-7-veilside-fortune Instructions: https://rebrickable.com/mocs/MOC-57488 Video: -
[CADA] CADA General Discussion Topic
ArtemyZotov replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey there~ Long time no see here on Eurobricks. I'm glad to present my first collab project with CaDA - RUF CTR 2017 (1/12 scale) -
[MOC] Brian's Toyota Supra (1:12)
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi there, here is my latest build - Brian's Toyota Supra MK IV. Scale: 1:12It has the same scale as 42111 "Dom's Dodge Charger" set Features:- RC controlled (driving and steering)- 2 L-motors for driving- 1 L-motor for steering- Openable doors and hood- Modular building (the chassis and the body are built separately)- Doors are supplied with shock absorbers which helps to hold the doors in open/close state. I recommend to use "BrickController 2" app for better experience. Free stickers are available to download, you can find it on my BrickSafe page. I printed all black logos on transparent self-adhesive film and printed colored prints on white self-adhesive film. -
[MOC] Brian's Toyota Supra (1:12)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I asked them and they answered that they ain't interested in this design. -
[MOC] Brian's Toyota Supra (1:12)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
There is no secret, it's an ordinary hinge with one vertical axle of rotating, a L-shape beam just helps limit the opening angle of the door. Thank you all for your kind words! -
[MOC] 10290 - UAZ 3303 (1:16)
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Alternate build of the "10290 Pickup Truck" set.Medium truck UAZ 3303 aka "Tadpole" is one of the legendary Soviet Union cars.The car has been manufactured since 1965. Features:- 1:16 scale- openable doors and trunk- rigid structure- all accessories from the original set was not used, you can put them into the trunk Instructions: Rebrickable- 10 replies
-
[MOC] 10290 - UAZ 3303 (1:16)
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Thanks you all for the kind words! Video is released.- 10 replies
-
42115 - Lamborghini Sian FKP 37
ArtemyZotov replied to Ngoc Nguyen's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I saw yellowish lime before in reviews, but in my 42115 there are green liftarms... I'm very disappointed( Manufactoring date is 11 2020 https://photos.app.goo.gl/7cQfmypyTSh4qLv2A -
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
@lorenzo_00_h built my RX7 with chrome wheels and black interior details + maximum amount of black pins was used, looks more authentic -
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I know many people buy chinese brands, so I did a collage with some variations I like white version, but there is no ogirinal LEGO white mudguard for the front wheels. -
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I know that the engine works not properly, but it is impossible for me to do realistic kinematic in this scale =) I watched your video before, you did a great job, but I wanted to create my own engine. -
[MOC] Han's Mazda RX-7 VeilSide Fortune (1:8) + Instructions
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
No, the first photo is the same as video preview... I reloaded it. Thanks all for good words~ -
[B-model] 42107 - Ducati Diavel 1260 S
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
-
[B-model] 42107 - Ducati Diavel 1260 S
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi all I won 42107 set as prize for latest TC18 contest and I'm glad to present my unofficial b-model ot thit set. This is 2020 Ducati Diavel 1260 S Features: - steering - front and rear suspension - working fake v2 piston engine - folding stand Perhaps the instructions are will be available later -
[TC18] Technic Small Car Contest - Results Topic
ArtemyZotov replied to Jim's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Thanks for the contest! I was happy to take part in this competition. -
[TC18] Ford GT 2005
ArtemyZotov posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everyone! I decided to join the contest) I built one Ford GT in bigger scale (using 56mm tyres) in 2017 year. But it is new challenge - build it in smaller scale. My first attempts to replicate original shapes: -
[TC18] Ford GT 2005
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Free instructions are available now https://rebrickable.com/mocs/MOC-42772 -
[TC18] Ford GT 2005
ArtemyZotov replied to ArtemyZotov's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Today I tried to render Ford GT with 42098 set to check the scale (Because the real one was taken apart a long time ago, I leave only the car). Fits pretty well Instructions are coming soon (today or tomorrow)