Agent 00381

Hooray 🥳

Intergalactic Police Interceptor An interceptor model for the intergalactic police protecting the life, health and interests of respectable citizens of the Union of Intergalactic Republics!Main functions:- Rotating and tilt of front and rear engines with two control joysticks on the rear deck and central tunnel- Opening doors (Butterfly at the front and Suicide doors at the back)- Working Landing Gear(for convenience, there are two levers on the bottom) Secondary functions:- Opening trunk- Three screens and small joysticks for drivers additional - the flame in the engines can be adjusted

Hello guys, some days ago I've started new moc for the contest. I decided to build the police side cause it's more stylish for me and I have more details in white/black. The photo below is for inspiration, not exact prototype To begin with, I decided to make a floor then bodywork and more structure more bodywork + B-pillars and more... then I have started to build the engines then added rear lights

then I made the landing gear, door mechanisms and new rear mechanism for the engines

The last variant of the front end

the last variant of the front steering system and the first variant of the engine tilt mechanism and front end design: Second variant of the grill (trying to make a cadillac):

Is the use of homemade stickers allowed?

Goooood morning, I continue to keep the WIP topic ...then I added a seat and more seats with control joystick The first prototype: the first variant of the front steering system:

Thank you, first of all I should connect rear and front mechanisms and only then show to everyone

then I've made mechanism for steering and backward motion then I've built front engines

Some photos. More you can see in my inst: Features: Steering by HOG(the wheel on the roof) and steering wheel Rear wheel drive Rear suspension V6 fake engine Opening hood and all doors Identical to the original size (1 stud wider)

Hello, I have almost finished recreation of this set and I have some photos in the process of creating, so this is a small WIP

The future has come! Let's think that there are screens inside that display the image from the cameras That's good idea!

26. 5550 Custom Rally Van remake Original set: 5550 Features: Steering by HOG(the wheel on the roof) and steering wheel Rear wheel drive Rear suspension V6 fake engine Opening hood and all doors Identical to the original size (1 stud wider) P.s. I didn't make this model with yellow stripe, because I haven't got enough details in this collor Discussion topic:

Ladies and gentlemen, sirs and miladies, I want to introduce you the Rolls Royce phantom V limousine 1960 James Young series!!!The process of creating this model took more than half a year, and I am very pleased to present you the result. In the model, I made sure that all the functions worked softly and pleasantly, and the body was strong and rigid for torsion and bending.Chassis Functions:1. Front independent suspension with caster and convergence2. Rear axle with Pahnar rod on springs made of pneumatic hoses, height adjustable3. Turning the wheels using the removable HOG or steering wheel in the cabin.4. Working "automatic" gearbox. There are D-N-R modes, they are switched by a lever from the passenger compartment, in D mode you can choose one of 4 speeds (movement of the red gear).5. The work of the fake V8 engineFunctions:1. Opening all 4 doors2. Opening of the 2-fold hood3. Opening of the trunk. There is a lock that supports the trunk in the open position and does not allow it to open spontaneously.4. Opening the glovebox5. Folding armrests in front and back6. Folding additional seats at the rear7. Rising partition between the driver and the rear passengers. Instruction Building process you can see in my inst:

The black bars simply indicate where the glass borders are, because in the original the A-pillar is the door and the transparent part to convey the shapes of the glass This is a video of the prototype, now the engine is firmly fixed. The rubber is used to rotate the steering wheel

Then I completely made the front part. I tried to put forward the headlights more similar to the original, but they look a little strange. I think the front of the car turned out to be quite beautiful

I decided to make the front part with a small angle of the hood to give the car aerodynamics and design. Yes, I changed yellow to red, cause I haven't got enough parts in the original color.

So, the first thing I had done was the chassis with steering (working steering wheel and HOG), fake V6 and rear suspension Then I started making the back part, but now I don't like it, so I'll remake it.

Good work, man! I really like the front grille and the suspension test in video. Are you from Russia?

Yes, I tried a lot of variations with the panels, that's the best. I would try using hoses if I had them and you would need to use more than one and this a bit destroys the concept: the upper and lower tubes seem to define the border of the wing

Yes, maybe the the bodywork looks a bit cuttered for you, but there are not so many types of panels in lego and I tried to use them properly to make the model more plump and soapy in the right places. Can you tell me, which places you would like to change and what details you would put there. The same situation with the rear, what details of it you don't like? About the gearbox: there is not much space inside the hood, so I decided on this layout. The gearbox with a red gear works well if the shafts are spinning, and there is no more compact 4-speed gearbox in lego yet, so we have that we have

Maybe spirit is hidden, as on the modern rolls I just couldn't find the suitable part

I searched and was surprised, there are no such photos, but you can see the chassis details here https://www.instagram.com/tv/CM1SrtjJhF3/?utm_medium=copy_link

Its "Panhard rod", sorry, translation difficulties