tomek9210

Eurobricks Citizen
  • Content Count

    149
  • Joined

  • Last visited

Everything posted by tomek9210

  1. Thank you! I need to substitute it in LDD and I figured it would be similiar in size to that piece.
  2. Hi, can anyone help me with this: LDD hasn't got this part in its inventory: https://www.bricklink.com/v2/catalog/catalogitem.page?P=52730&idColor=85#T=C&C=85 Can anyone measure it in comparison to this part: https://www.bricklink.com/catalogItemIn.asp?P=42610&in=S I need to try the size before I order parts. Thanks!
  3. tomek9210

    Outlaw...a Crowkillers production

    It is a small turntable - https://www.bricklink.com/v2/catalog/catalogitem.page?P=99010&name=Technic Turntable Small Top&category=[Technic]#T=C&C=11
  4. You have built it wrong. The +o beam should be turned 90 degrees, so the 'o' part of it is inside the rim. Look here:
  5. tomek9210

    DNR Shifter Issue

    Don't use 3L beams. Use longer beams instead and attach them to the chassis.
  6. tomek9210

    DNR Shifter Issue

    The beams holding the shifter should be part of the chassis, now they are not. The mounting points are too far away from each other.
  7. tomek9210

    DNR Shifter Issue

    Maybe use driving ring extenders for the shifter and then use the other holes of the bracket as well. It might help.
  8. tomek9210

    Technic 2020 Set Discussion

    Finally #3 Red connectors on 42106!
  9. Not only JLR comes back to I6. Mercedes too. I6 are better in terms of balance than v6. And the sound is nicer :)
  10. Then why this model has I6 engine when they are going to have v6 ones?
  11. No, according to wiki it has R4 and R6 engines.
  12. tomek9210

    [WIP] Datsun 240Z .... body work slow

    You can use this part: https://www.bricklink.com/v2/catalog/catalogitem.page?P=6572 It works great in custom built hubs.
  13. What about 42099 joints and hubs? I know that upper ball joint is fixed, but sides can be used for building a custom one hub over the existing one.
  14. Awesome. I can't wait to see first results. I hope for caster, kingpin and nice turning radius :)
  15. I hope you will document the development on YT :) Do you plan to use your own turntable hubs?
  16. tomek9210

    42110 - Land Rover Defender

    3? I thought they are 2 studs deep when I saw the video reviews. The suspension arm 'hides' one stud into the rim, so with hub itself it makes 2 studs deep.
  17. tomek9210

    42110 - Land Rover Defender

    Hi, can anyone check the depth of the rims? A photo with a beam or an axle would be great. Thanks!
  18. tomek9210

    [MOC] Rolls Royce Phantom (2018)

    This is my experience and just physics. Compressing force is verical, so when the spring is mounted this way, it helds more weight than angled one. Imagine the triangle of forces. But this is your setup, you know all details and space you can use in front suspension, so whatever suits your needs is ok :) Have you thought about adding torsion bar and anti-roll bar?
  19. tomek9210

    [MOC] Rolls Royce Phantom (2018)

    One more thing - have you tried to make the hood a bit angled? Just a stud of difference between windshield and grill would result in a better overall look. Now it is very boxy.
  20. tomek9210

    [MOC] Rolls Royce Phantom (2018)

    Mounting spring vertically, not angled, would help, because the stiffness is higher then.
  21. tomek9210

    [MOC] Rolls Royce Phantom (2018)

    Now the wheel arches look too big for wheels. Technic wheel arches looked way better.
  22. tomek9210

    42110 - Land Rover Defender

    Volvo had such engines, even transverse V8 :)
  23. tomek9210

    42110 - Land Rover Defender

    It will be very MOD friendly - extending the wheelbase, adding RC, adding more speeds to the gearbox etc. Adjustable suspension would be great, even if it will be done like in the Bruno's P1. I like the look of that car, colour is great too, especially for military MOCs.
  24. tomek9210

    42110 - Land Rover Defender

    Do I see correctly that there is 3l perpendicular connector used for torsion? I really hope for deep offset rims and at least Ackermann steering :)
  25. Hi, sorry for digging up the old thread, but I think my questions fit here. How deep are those rims? 2 studs? Is the axle hole 1 stud long? What is the usable diameter of the inner part of rim? Thanks!