CoNSpiracy

Eurobricks Vassals
  • Content Count

    54
  • Joined

  • Last visited

About CoNSpiracy

Spam Prevention

  • What is favorite LEGO theme? (we need this info to prevent spam)
    City

Recent Profile Visitors

350 profile views
  1. CoNSpiracy

    Bluebrick Layout Software

    Thanks again for making the library available. This is very helpful and much appreciated.
  2. CoNSpiracy

    PF lights and "switch direction"

    Yes, indeed, the Technic Builders Guide 2nd ed. turned out to have an example which is pretty much spot on to what I want to do. With figures 9-23, 9-29 and 9-30 in the book, I am sure I can make it work like I want. Thanks again to all of you for your support. Much appreciated and exactly what I was wishing for!
  3. CoNSpiracy

    PF lights and "switch direction"

    Excellent, thanks! I have the book at home and will go check it out.
  4. CoNSpiracy

    PF lights and "switch direction"

    Thanks for sharing this.
  5. CoNSpiracy

    PF lights and "switch direction"

    @Captainowie I have been thinking more about the solution you suggested. I could start off with controlling the track switch with a PF motor, like in this video: HOWTO LEGO Train Motorized Points Switch. I would then need to have the drive / technic axle coming out the motor to continue on to two different PF control switches (8869). I guess I could achieve this by putting a gear on the technic axle coming from the motor, in order to connect with two new gears, each with a technic axle going into a respective PF control switch. But how to physically block the travel of the two switches in one direction each (as you suggested) in a way where the motor is not put under too much constraint and where the other “leg” of the mechanism would still rotate / make a change on the relevant switch?
  6. CoNSpiracy

    Bluebrick Layout Software

    Sounds really good. Will it be a complete library of all the TrixBrix tracks, including the odd pieces such as the buffer stop and short straight tracks (1/16, 2/16, 4/16)? I have just had a look at your homepage and your YouTube videos. Wow, your setup is really impressive - looking forward to seeing more footage, including some "how-to" videos :-) (In particular, I am interested in the software part, and how you have added sounds)
  7. CoNSpiracy

    PF lights and "switch direction"

    Thanks, I will give this idea some further thought. It would be quite heavy on PF components, though, since I need one set of PF lights to turn on in forward direction and another set of lights turn on in reverse. Thís particular feature is not for the houses. It is for a signal system for the train tracks in the layout, where I want to have a PF motor controlling a track switch and in connection therewith have green and right red lights changing whenever the track switch direction is changed by the motor.
  8. CoNSpiracy

    PF lights and "switch direction"

    Thanks for explaining and taking the time to make the diagram. I am afraid it is beyond my limited electrical and soldering skills so I will not dare to move further down that avenue Yes it would! Another other example of great use of such PF "logic" brick you describe would be when motorizing locomotives, which are designed to run both ways (e.g. the one from set 7939). Here it would be great to have front lights turned on only in the direction the locomotive is running. With 3D printing having become mainstream in recent years I am wondering why there are not more (or any?) third party products which link together with PF using the PF sockets. I am of course aware of the larger control units such as SBrick, but I am thinking about more simple products such as the one you describe. However, since Lego is now replacing PF with Powered Up, I guess third party companies won't have much focus on developing add-on stuff for PF in the future, either. I am currently making a big city layout including a train track, where I want to light up the houses in the city. As I am making the city in modules which are meant to be dismantled quite often and transported/stored separately, I need to make sure that the wires for the lights can be easily disconnected and connected again. For this purpose, I find all the third party lighting products much too vulnerable with their small connections. I have broken quite a few of them when testing the concepts. So I have ended up with using Lego PF lights and PF extension wires, in order to have the easy click connections with the PF sockets. However, this is quite costly as I want to light up quite a few houses. Also, because I don't like the bright white colour of the PF lights I have had to cut off the LEDs (and transclear plastic housings) and soldered warm white LEDs onto the wires instead... So a lot of hassle just because no third party products have a sufficiently robust (in my view) connection system.
  9. CoNSpiracy

    PF lights and "switch direction"

    Thanks. So that would be the "D1 Diode Bridge" shown in the picture of the print board inside the middle brick (as per the homepage you linked to)? Could I achieve the functionality I am looking for by simply removing one of the connections on the print board?
  10. CoNSpiracy

    PF lights and "switch direction"

    Yes, but I want to make it so that if the "direction" on the battery box (or control switch 8869) is set to forward then the lights are turned on when the power is turned on, and when the direction is set to backwards then the lights are not turned on when the power is turned on.
  11. Per default, if I connect PF lights to a Lego PF battery box, the lights will shine no matter which "direction" is selected on the battery box (forward or backwards). The same applies if I insert a PF control switch (8869) in between the PF ligths and the battery box and change the "direction" using the control switch. Is there a way to make the PF lights work only with one of the directions? Forgive my ignorance and lack of electric knowledge, but would it work to cut one of the two middle wires (C1 or C2) in the PF lights cable (between the PF connector and the black brick)? Or would it just result in the PF lights not working at all?
  12. CoNSpiracy

    Bluebrick Layout Software

    Yes, but it would be quite some work for me to add all the houses I need to the package. I am creating a Winter Village layout with all the official VW sets plus some mocs. The area layer paint function could perhaps do the trick for me, if you could make it possible to go down to 1 stud? Otherwise the rectangular outline function I described would be extremely helpful, I think.
  13. CoNSpiracy

    Bluebrick Layout Software

    Ah, thanks I didn't know that. Size 2 seems to work better for me. I had actually tested the area layer mode before posting the feature request, but I gave up on it since 8 studs seems to be the minimum grid size. Otherwise it could do. How do I go below 8 studs in area layer grid size?
  14. I ended up with the following easy-to-do solution which does not involve soldering (only wire-stripping): For 10½ Euros I bought a universal wall wart power adapter which outputs 3-12V (3 / 4.5 / 5 / 6 / 7.5 / 9 / 12 V), stabilised, 1.0A. It came with a bunch of different interchangeable DC male plugs, including 5.5 x 2.1 mm: https://www.av-connection.com/?PNo=NNA-1165 For 1½ Euros I also bought a DC 5.50 x 2.10 female to 2-pin terminal block: https://www.av-connection.com/?PGr=10964, which connects with the above-mentioned DC male plug. I then cut a LEGO Power Functions 8886 Extension Wire in two halfs and carefully separated the four cables at the cut end so that I could strip the wire of the two middle cables (C1 and C2) and connect them in the female terminal block. The two outer cables (GND and 9V), which has no use in this setup, I left untouched except that I protected with two pieces of isolation tape. This works like a charm. I plan on adding a control switch (8869) right after this modified extension wire to allow for easy turning on and off. I noticed that without such control switch, if I turn off the power by just unplugging the wall wart power adapter, there is some residual / leftover power in the circuit which keeps the motor going / LED shining a few more moments. So now I just need to decide going forward if I want to keep the voltage output setting on the adapter at 9V or 12V. The PF motors run faster and the LED lights shine brighter at 12V, instead of 9V which, however, is closer to the output of the original Lego PF battery boxes.
  15. CoNSpiracy

    Bluebrick Layout Software

    About the font size in text layers, is it just me or does the text appear very big even with the lowest font size setting (8) in Arial? Much larger than for example the standard text saying "xx studs" when adding a ruler in a ruler layer. I'm trying to add some discreet text to my layout but it looks quite dominant even with font size 8 in Arial. Also, a feature request: In my train layout I would like to mark where my buildings are located. I know that this could be done by adding each house as a part in the parts library, but this would be quite some work. What I am after is a function (in a new layer type?) where I can create a box/rectangular with an outline (could be a black outline and transparent inside, or, the sophisticated solution could be to let the user define the two colours, including transparent). The size of the box (No. of studs of the 2x two sides of the rectangular) could be defined by clicking the mouse and dragging the cursor, and/or by an input box where the dimensions can be typed in. I appreciate that this would only make it possible to show the outline of rectangular structures, but it would be a very good starting point as most houses and other buildings consists of just one or a very few rectangular ground area(s). It would also allow me to mark my custom made roads (i.e. not using road base plates), side walk etc.