-
Content Count
5881 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by efferman
-
42113 Osprey, Mods and improvements
efferman posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Beside the Colour swap to make the Osprey buildable with actual parts there are some functions which may not work or look properly. so feel free to add your mods here. please dont discuss here about the release, there are several topics for this. Here are some .io files to rebrick the Set. my Overhaul starts with the wing in Parking position. -
[SET] Creator 31146 or the Resurrection of 5590 Whirl and Wheel Super Truck
efferman replied to pow's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi, Yesterday i bought the 31146 and made some changes on it. The free instruction is online at Rebrickable. https://rebrickable.com/mocs/MOC-178013/efferman/micro-black-cat-31146-overhauled/#details -
42177 Mercedes G500 4X4
efferman replied to SNIPE's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
AMG did the new one, not Mercedes, and the 42177 is a Mercedes license -
42177 Mercedes G500 4X4
efferman replied to SNIPE's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Good point, iam thinking to much in RC compatibility, and a G has to be offroad capable. Four of them are probably to hard for a 2900 piece model, but with the size you are right. -
42177 Mercedes G500 4X4
efferman replied to SNIPE's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
i predict planetary hubs, because actually only the AMG G63 4x4² has portal axles. The G500 4x4² is not longer produced. -
Third Party Tires for Lego Technic Rims
efferman posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
you know that the lego tires are often too wide for their diameter or the pattern is only street legal and nothing for real offroad driving. now i have found some RC crawler tires which fits nearly perfect to the 8110 unimog rims. the tires came from the german manufacturer ansmann and have the number 211000224 the diameter is 108mm and the width is 40mm or 4,25"x1,45"- 1,9" they are ballon tires with a very soft rubber compound and with a foam inside here some pics if you know some other compatible third part tires, please tell it us.- 689 replies
-
- where can I buy these wheels
- Third Party
-
(and 3 more)
Tagged with:
-
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Yes, and it works like the lego actuator, but the xl actuator von cada has a stud more stroke, but has the same length retracted. But, the pistonrods are not fully metal. it is the official CaDA Webshop, so you can thrust them. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
it was in the white SUV, but i have forgotten in which function. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
oh yes, the classic sports car looks like a porsche, but it is built totally different fom the lego porsche. Or does the lego porsche has an independent front supension and is prepared for RC? The Dark knight is 1:10 and the Lego Senna has roundabout a scale of 1:16. ok, the stickers are looking similar. The monster truck is built totally different than 42099 . Single motor with two speed gearbox and solid axles, and not two motors with independent suspension. OK, the body follows the same design idea, but it is still different. the Viva hypercar, was well designed by T_lego and brought as Set by CaDA in collaboration with @T Lego Do you have seen other remarkable resemblances? -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
please show these Sets with "remarkable resemblence" about the licences: CaDa doesnt allow violations against licenses. For example, i made different body types for their small humvee and asked if they would make a set of the three body types. They said no, because they only have the license for the humvee with the angled roof. So be sure, every licensed model on the CaDA website is a real licensed model autorized by the manufacturer of the real thing. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
holy, this is probably the reason for the misalignment. beside the wrong oriented connector, the front tires are not mounted like in the instruction. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
the second steering axle has a larger angle than the first one, so there are two options: The steering levers of the first axle are on the second axle or the gear racks arent properly aligned. The second one is more plausible. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Ok, i have a to take a Look at this. Edit: your steering System is not properly aligned. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
please make a picture -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
It is prefered by CaDA, so they told me i have to do the motorisation as option. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
First glimpses of the 787B iam curious if there will be a bigger one. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
For sure, but i found instantly one error in the instruction. Tie the rope to the crossaxle in step E160 and not onto the hook in step E161. The winch is much faster this way. Do you have already built the Gearbox? Was it to complex? -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Thank you very much for your observations. A pretty heavy package arrived a few minutes ago More pictures will follow: Part list: -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
there will be shocks like this or better in one of the upcoming models, but these models are still in development. So it will take a while. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I have more than 20 15L flipflop Beams in my Crane truck, so they definetly exist. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The case is harder to open than the Lego diff, but it is still possible. The diff is on the left side of the picture -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The Gear is part of the differential case and can not be used as single gear. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Where do you have seen them? i don't have seen it yet. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
My contact at CaDA said the Crane Truck will sold only non motorized, to keep the prize in a resonable range. -
[CADA] CADA General Discussion Topic
efferman replied to Milan's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
it works with the CaDA Gears, and actual lego Clutch Gears. It works also with the orange white Differential case. The 28Z Gear is part of the mould so it can't be used separatley