KingPixels

Bootleg Super Heroes minifigs - worth it or not?

Recommended Posts

My Xinh Spiderman wave came in and I just assembled it and her are a few thoughts on it.

Iron Spider: better than the SY one as this one has the iron mandible connection in the back printing and has the iron mandibles.

Green goblin: no flaws in the printing comparing it to the jr set, the cap piece fits a bit loose. Feels nice also. Not extremely cheap plastic.

Doc Ock: haha my figure came with half a hair piece. Kinda disappointed but the seller said he'll send me a replacement for free. As for the tentacles and the printing it's accurate to the set from 2012 (?)

Spiderman 2099: this figure actually has back printing as well as arm printing compared to the SY one. Well done xinh. Also the eyes are more menacing.

Spiderwoman: the figure seems plain for some reason, not sure why. But looking at photos and videos of the authentic SDCC one it's accurate enought.

Scarlet Spider (?): not sure of this figure since it doesn't look like Ben Reily. Probably my favorite figure out of the wave since it has arm printing and back printing. The back printing is very fine and the spider is cleanly printed on.

Spider Gwen: People didn't like this figure since it seemed plain, the printing on the hood is neat as well as the paint aps on the arm. The figure has back printing also, here on my figure there's a noticeable printing error on the stripes.

Spiderman Noir: I enjoy figures that aren't extremely detailed and done with one or two colors (See Pogo Movie Wolverine, or Iron Spider) but the colors on here seem lazy. I feel if I play with this figure or get grease on it, the printing will rub off. Still not bad since we got this figure. The wave doesn't seem like it's going down in quality. Same plastic of the Xinh Civil war wave.

Edited by Kire

Share this post


Link to post
Share on other sites

That black panther seems good

The cloak and collar are two separate parts and it had two collars which was a bonus. The leg printing's a bit off and all the figures are a little loose round the joints.

OK aren't the best brand, but at least they do their own thing rather than just copying Lego designs.

Share this post


Link to post
Share on other sites

Got my OK Civil War wave, so for those who were interested in the Ant-man and Crossbones figures:

uDTKUz9.jpg

What about falcon wings?? Looks good!!

Share this post


Link to post
Share on other sites

Hey has anybody bought custom super hero minifigures from the "brickkit" store on bricklink? I want to buy all his marvel sdcc custom figures but i want to know how the quality is first...

Edited by Stan-Lee

Share this post


Link to post
Share on other sites

What about falcon wings?? Looks good!!

JKbXzbb.jpg

I think they're a thin plasticard. The off-cut that was in the head hole doesn't seem to tear.

Share this post


Link to post
Share on other sites

If that is the actual Pogo figure then they have made an astounding effort to improve their quality.

Figures of that quality and with their scope of releases would put them top of the tree for me. SY can be fantastic but their design team can be terrible. Clones of genuine Lwgo releases don't interest me as I have every DC figure but even if they clone some of the better digital custom figures then they're the ones to watch.

Share this post


Link to post
Share on other sites

Are these repacked with the goblin king???

They've been out a long time - well over a year that I know of but probably a lot longer.

Share this post


Link to post
Share on other sites

Are there any bootleg minifigs with this hairpiece? I'm looking to make an Enchantress figure and I think that hair would work better than the standard blonde LEGO female hairpiece.

s-l1000.jpg

Share this post


Link to post
Share on other sites

Are there any bootleg minifigs with this hairpiece? I'm looking to make an Enchantress figure and I think that hair would work better than the standard blonde LEGO female hairpiece.

s-l1000.jpg

I got a couple of them from lego brick & pieces. Think no bootleg has it blonde

Share this post


Link to post
Share on other sites

Got my White Tiger PG038 yesterday. The printing is pretty good on the front. A few blurry edges on the back. One arm had a dimple. The package was missing the black ponytail (but I got a free black plastic sprue! :wink: ), so I added a black hairpiece of my own.

27015746704_8ab673b165_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27625888645_61c5039700_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27552865441_802bb6dbea_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27015761544_7a06bf0e4b_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

Received my Sabertooth PG034 too. Printing was really good on this one and it included the claws.

27526507612_41c783d501_m.jpgSabretooth - PG034 by Kilty ONeal, on Flickr

27592071446_5f6676e21a_m.jpgSabretooth - PG034 by Kilty ONeal, on Flickr

Share this post


Link to post
Share on other sites

Got my White Tiger PG038 yesterday. The printing is pretty good on the front. A few blurry edges on the back. One arm had a dimple. The package was missing the black ponytail (but I got a free black plastic sprue! :wink: ), so I added a black hairpiece of my own.

27015746704_8ab673b165_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27625888645_61c5039700_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27552865441_802bb6dbea_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

27015761544_7a06bf0e4b_m.jpgWhite Tiger - PG038 by Kilty ONeal, on Flickr

Received my Sabertooth PG034 too. Printing was really good on this one and it included the claws.

27526507612_41c783d501_m.jpgSabretooth - PG034 by Kilty ONeal, on Flickr

27592071446_5f6676e21a_m.jpgSabretooth - PG034 by Kilty ONeal, on Flickr

Nice figures!!! Which aliexpress seller?? Not order another Pogo figure??

Share this post


Link to post
Share on other sites

Nice figures!!! Which aliexpress seller?? Not order another Pogo figure??

I got those two from Megao Electronics Trade on Aliexpress. Shipping was really fast. I'll probably order more from them when I see something else that I like.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.