CopMike Posted January 5, 2014 Here we can post the new parts coming in the 2014 sets as as opossed to the Survey: New parts and new colors thread in the Embassy, where we wish for new parts/colors. Here´s a list from Bricklink with new parts & stickers. So here's a new part... Share this post Link to post Share on other sites
Alfadas Posted January 5, 2014 Not a lot of interesting parts for me, just that 1x4 mason brick you show in the pic! Share this post Link to post Share on other sites
emilstorm Posted January 5, 2014 Thanks for the BL link, will be interesting to have a closer look tonight at work... ;) Share this post Link to post Share on other sites
LEGO Historian Posted January 5, 2014 (edited) Not a lot of interesting parts for me, just that 1x4 mason brick you show in the pic! That 1x4 masonry brick is a nice addition... but like the 1x2 and 1x4 log bricks... it doesn't complete a "system"... a corner brick and a 1x1 brick would be a nice addition for both modified brick types. Also... since I never saw the back side of the masonry brick type... a nice surprise... a "rusticated" brick type... Rusticated bricks can also create some nice historic looks... http://upload.wikimedia.org/wikipedia/commons/c/ca/Palazzo_Pitti,_cortile_1.JPG Edited January 5, 2014 by Rick Please keep embedded images to a maximum of 1024x768 px. Share this post Link to post Share on other sites
Andy D Posted January 5, 2014 At first look there are three parts that look interesting Grass stem http://www.bricklink.com/catalogItem.asp?P=15279 Slope http://www.bricklink.com/catalogItem.asp?P=15068 Pineapple head http://www.bricklink.com/catalogItem.asp?P=3626cpb1018 Andy D Share this post Link to post Share on other sites
Mikuri Posted January 5, 2014 New technic part could be a nice addition. http://www.bricklink.com/catalogItemPic.asp?P=11214 Share this post Link to post Share on other sites
jodawill Posted January 5, 2014 Here are some more interesting ones: Wedge, Plate A Shaped with 2 Rows of 4 Studs Plate 3 x 3 Cross Tile 2 x 2 Corner And the Flounder minifigure(?) looks really nice. That 1x4 masonry brick is a nice addition... but like the 1x2 and 1x4 log bricks... it doesn't complete a "system"... a corner brick and a 1x1 brick would be a nice addition for both modified brick types. Also... since I never saw the back side of the masonry brick type... a nice surprise... a "rusticated" brick type... Rusticated bricks can also create some nice historic looks... http://upload.wikime...,_cortile_1.JPG A brick L-shaped corner would also be nice. Personally, I've always wanted them to make some more of the log-type bricks. I've always wished they made a 1x1 log brick for the western sets. Share this post Link to post Share on other sites
Lego Otaku Posted January 5, 2014 Something for the corner, and release all variants of masonry bricks in dark red. Share this post Link to post Share on other sites
jodawill Posted January 5, 2014 Something for the corner, and release all variants of masonry bricks in dark red. That's hilarious. I can't believe I've never even thought of having them in dark red. That would definitely make more sense. I think the dark red tiles used in the modular firehouse look better than those bricks though. Share this post Link to post Share on other sites
Faefrost Posted January 5, 2014 That's hilarious. I can't believe I've never even thought of having them in dark red. That would definitely make more sense. I think the dark red tiles used in the modular firehouse look better than those bricks though. Reddish brown and dark brown would be really useful too. Look how brick like those colors can be in the Pet Shop. The masonry bricks are great for adding just a touch of texture. Share this post Link to post Share on other sites
Gnac Posted January 5, 2014 (edited) Here are some more interesting ones: Wedge, Plate A Shaped with 2 Rows of 4 Studs Plate 3 x 3 Cross Tile 2 x 2 Corner I am also interested in these! Oh, two more things to add, which are not yet on Bricklink: 14720 - Beam I -Frame 3X5 90 Degr. Hole Ø4.85 15461 - Double Snap With Hole Ø4.85 Edited January 5, 2014 by Gnac Share this post Link to post Share on other sites
caperberry Posted January 6, 2014 TLG updated their online inventory on Jan 1, so there are plenty of exciting new elements to be found on Brickset that are yet to make it to Bricklink. Like Sand Blue cheese! http://www.brickset.com/parts/new/?DateAdded=01/01/2014 Share this post Link to post Share on other sites
Aanchir Posted January 6, 2014 One new mold that I haven't seen discussed in detail anywhere but which has amazing potential is 14301 Flex Tube 12 M. It's basically like 30527 but with sturdier 3.2mm connection points rather than single stud/anti-stud connections. This is great news in my book because my memories of that piece deal largely with it popping off when you don't want it to! Legends of Chima introduces 15071 Gun Base 1X2X2/3 W.Knob/Shaft, an amazing new weapon piece that I think a lot of other sci-fi builders should pay close attention to. Share this post Link to post Share on other sites
escortmad79 Posted January 6, 2014 Legends of Chima introduces 15071 Gun Base 1X2X2/3 W.Knob/Shaft, an amazing new weapon piece that I think a lot of other sci-fi builders should pay close attention to. That + equals Share this post Link to post Share on other sites
Faefrost Posted January 6, 2014 Legends of Chima introduces 15071 Gun Base 1X2X2/3 W.Knob/Shaft, an amazing new weapon piece that I think a lot of other sci-fi builders should pay close attention to. neat! I can see a lot of uses for that. Guns. Cameras, tools, details and greebling. thrusters, etc. plus the potential for some interesting direction changes. Share this post Link to post Share on other sites
qiadris Posted January 7, 2014 The cinderella wheel seems useful for Castle. Share this post Link to post Share on other sites
paul_delahaye Posted January 13, 2014 Considering the cost of injection molds, there are a lot of new parts here, and only a few do them appear to add value, most can be achieved using a combination of other bricks. Share this post Link to post Share on other sites
SweetiePie88 Posted January 13, 2014 agreed. I'm looking at a few different examples on the list. Like the ball and chain, what's wrong with a tecnic ball and short chain combo? 2 molds that exist already and outside of police, there's not much use for that mold. And that modified 1x1 with beak. I can't see it being used outside of some animals, MAYBE décor purposes. the big castle wheels are another. Outside of fairy tale type uses and a maybe on certain castle cases, can they even come in handy? and that weird new A-frame plate.it makes no sense at all Share this post Link to post Share on other sites
Rook Posted January 14, 2014 (edited) I like new toes pieces on this thing. Looks like this might be a new piece on the hip as well. The ball part of the joint isn't but the maybe. Edited January 14, 2014 by Rook Share this post Link to post Share on other sites
tomdobs55 Posted January 15, 2014 The new ball joints look like they'll be great! Share this post Link to post Share on other sites
Aanchir Posted January 15, 2014 agreed. I'm looking at a few different examples on the list. Like the ball and chain, what's wrong with a tecnic ball and short chain combo? 2 molds that exist already and outside of police, there's not much use for that mold. And that modified 1x1 with beak. I can't see it being used outside of some animals, MAYBE décor purposes. the big castle wheels are another. Outside of fairy tale type uses and a maybe on certain castle cases, can they even come in handy? and that weird new A-frame plate.it makes no sense at all Well, the 1x1 plate with the downward beak/tooth seems to me like it'll have all kinds of excellent sculptural uses. The A-Frame plate is another excellent piece. It allows for a perfect 45-degree angle shift that is generally much more sturdy than you could get with a hinge plate. I agree with you about the ball and chain, though. I guess it's a little more compact than a Technic ball and short chain would be, but with connection points on just one end, I don't see it being nearly as versatile as existing chain elements. Share this post Link to post Share on other sites
DrJB Posted January 30, 2014 (edited) Take a look at this photo. On the top edge, you'll notice a NEW modified 1×2 plate that holds a round pin ... actually, you can see 7 of them. http://www.flickr.co...in/photostream/ Edited January 30, 2014 by DrJB Share this post Link to post Share on other sites
nicjasno Posted January 30, 2014 It holds the ball joint. This is awesome. Need to get hold of some of those! Share this post Link to post Share on other sites
Conchas Posted January 30, 2014 These are the new hinges introduced with the LEGO Mixels. Here they fit with the "Technic Pin with Towball". Share this post Link to post Share on other sites
Paul Boratko Posted January 30, 2014 (edited) LOL.. I actually came here to post that picture of that Agents set because it had so much Technic in it... There are 7 on the tiop and what looks to be 2 on each side... Plus many more in the back you can see when it is all opened up... Edited January 30, 2014 by Paul Boratko Share this post Link to post Share on other sites