ust60 Posted April 27, 2012 Hello forum community, four months have passed. since I've presented here some of mine. Can you remember. I was in love with BR-01 from Teddy. Love like a schoolboy. Now 34 orders later (at BrickLink) sees my BR-01 is made of. It is still not really Complete. But I would imagine though. And if you think this is a nice floor model for the showcase Look at the videos Best regards Udo Sorry for my poor language skills Share this post Link to post Share on other sites
LEGO Guy Bri Posted April 27, 2012 Great job so far, ust60! This sure is a popular loco! How do these x-6-x's handle in the curves? Seeing how 3 of the wheels are connected, I've wandered how they fare Share this post Link to post Share on other sites
peterab Posted April 28, 2012 I like your BR 01, particularly the cab interior, the levers along the sides of the tender and the triple pipes on the boiler. What piece is holding the pipes in place? I've been looking for a solution for my endless WIP BR 50 :-) Great job so far, ust60! This sure is a popular loco! How do these x-6-x's handle in the curves? Seeing how 3 of the wheels are connected, I've wandered how they fare The middle set of wheels are blind drivers (ie they have no ridges on the rims) so they can float over the rails, hence no handling problems. Share this post Link to post Share on other sites
ust60 Posted April 28, 2012 Hello forum community, Hallo Lego Gay Bri, is your question answered? With the declaration of peterab because of my poor knowledge of English, I have not understood your question Please formulate your question again different, if it is still not answered, so that I can answer you Thank you Hallo peterab, on the photograph is a fixing to view,( in the red circle ) the second fixing is hidden ( red arrow ) The upper and lower "pipe" through 3 are self-made aluminum parts fixed Mit freundlichen Grüßen Udo Share this post Link to post Share on other sites
ust60 Posted April 30, 2012 Hallo peterab, Excuse me because I made a mistake when uploading. This picture is better than explanation. on the photograph is a fixing to view,( in the red circle ) the second fixing is hidden ( red arrow ) The upper and lower "pipe" through 3 are self-made aluminum parts fixed Best regards Udo Share this post Link to post Share on other sites
harnbak Posted May 1, 2012 Absolutely lovely and very clean design! Share this post Link to post Share on other sites
peterab Posted May 2, 2012 This picture is better than explanation. Thanks Udo for the picture, I now know why I couldn't work out what the custom piece was :-) Share this post Link to post Share on other sites
ust60 Posted May 2, 2012 Thanks Udo for the picture, I now know why I couldn't work out what the custom piece was :-) All pictures on http://www.flickr.com/photos/ust60/ Best regards Udo Share this post Link to post Share on other sites
mrlegoman Posted May 2, 2012 Amazing details! Love the photo of where the driver sits - shows a lot of detail. Great job. Share this post Link to post Share on other sites
GSD Jerrys Posted February 3, 2015 Nice how did you make it so circlular Share this post Link to post Share on other sites
Vliebricker Posted February 10, 2015 Hi, Ust60, very, very beautiful steam engine that you've built. Also running nicely. But how does she perform with a number of coaches on her tail? It seems that running through the curves as it is without coaches, is somewhat tough. But the model is great, I would love to have one myself. Share this post Link to post Share on other sites
ust60 Posted February 12, 2015 Hello alias GSD Jerry Was your question: How do I get for boiler around? With these parts. Part 88930 Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes All photos in Flickr album BR 01 ----------------------------------------------------------------------------------------------------------- Hello Vliebricker, I want answer your question. But the problem is the translation. The Translation Program translates only nonsense . Can you repeat the question in Dutch A lot of time has passed (20 years), but I've tried to learn Dutch ------------------------------------------------------------------------------------------------------------- Hello Vliebricker, Ik wil graag dat je je vraag te beantwoorden. Maar het probleem is de vertaling. De Vertaling Programma vertaalt Nonsens. Kunt u de vraag in het Nederlands te herhalen. Veel tijd is verstreken (20 jaar), maar ik heb geprobeerd om Nederlands te leren. Misschien kan ik dan begrijp uw vraag. En je vraag te beantwoorden. -------------------------------------------------------------------------------------------------------------------------------- Hallo Vliebricker, ich möchte dir deine Frage beantworten. Aber das Problem ist die Übersetzung. Das Übersetzungsprogram übersetzt Nonsens. Kannst du die Frage auf Niederländisch wiederholen Es ist Zeit vergangen ( 20 Jahre ) Aber ich habe mal versucht Niederländisch zu lernen Vieleicht kann ich deine frage dann verstehen. Und dir deine Frage Beantworten. Yours sincerely, Met vriendelijke groet Mit freundlichen Grüßen Udo Share this post Link to post Share on other sites
Vliebricker Posted February 23, 2015 Hi, Ust60, very, very beautiful steam engine that you've built. Also running nicely. But how does she perform with a number of coaches on her tail? It seems that running through the curves as it is without coaches, is somewhat tough. But the model is great, I would love to have one myself. Gutentag, Herr Ust60, sehr, sehr schöne Dampf Zug. Und sie lauft auch sehr schön. Aber wie wirkt es wann sie mit mehrere wagons durch die Bahn fahrt? Schon jezt ohne wagons kostet sie einige mühe durch die etwas enge Lego Buchten zu fahren. Aber ich finde ihre model fabelhaft. Ich wunschte das ich so eine Dampfer hätte! Haben sie wieleicht auch eine Bauanleitung? Entschuldigung für meine Grammatik. Im Bergen-Hohne am Natotruppenübungsplatz sprach ich nur Deutsch und brauchte nicht zu schreiben ;-) Share this post Link to post Share on other sites
ust60 Posted February 24, 2015 (edited) Hello alias Vliebricker, your German is much better, as my English. And even better than my Dutch. A blueprint for the BR 01 I have not. I have only copied. She is from Johan aka Teddy https://www.flickr.com/photos/36059767@N08/ To see pictures of my BR 01. All you need is down on my Flickr address click. https://www.flickr.com/photos/122687637@N08/ What all the BR 01 pulls, you can see here. After 1 minute 30 seconds the BR 01 " at work " The second steam locomotive is a BR 23. If you are interested in the BR 23 I can help you. The BR 23 should on the original, by Ben Benecke remind. but it is not a one to one copy. Yours sincerely, Udo -------------------------------------------------------------------------------------------------------------------------------------- Hallo alias Vliebricker, je Duits is veel beter dan mijn Engels. En zelfs beter dan mijn nederlands. Een blauwdruk voor de BR 01 heb ik niet. Ik heb eigenlijk gewoon gekopieerd. Het is Johan ook bekend door Teddy. Om foto's van mijn BR 01 zien, moet je alleen maar te klikken op mijn Flickr-mailadres Wat de BR 01 trekt alles, kunt u hier zien. Na 1:30 van de BR 01 op het werk. De tweede is een stoomlocomotief BR 23 Bent u geïnteresseerd in de BR 23 Ik kan u helpen bent. De BR 23 moet niet vergeten de oorspronkelijke Ben Benecke, maar het is niet een één op één kopie. Met vriendelijke groet, Udo -------------------------------------------------------------------------------------------------------------------------------------- Hallo alias Vliebricker, dein deutsch ist viel besser, als mein Englisch. Und auch besser als mein niederländisch. Einen Bauplan für die BR 01 habe ich nicht. Ich habe sie eigentlich nur kopiert. Sie ist von Johan alias Teddy. Um Bilder von meiner BR 01 zu sehen, brauchst du nur unten auf meinen Flickr Adresse klicken. Was die BR 01 alles zieht, kannst du hier sehen. Nach 1:30 die BR 01 bei der Arbeit. Die zweite Dampflok ist eine BR 23. Wenn du Interesse an der BR 23 hast kann ich dir helfen. Die BR 23 sollte an das Original von Ben Benecke erinnern, aber sie ist keine eins zu eins Kopie. Mit freundlichen Grüßen Udo Edited February 24, 2015 by ust60 Share this post Link to post Share on other sites