legolijntje

[KEY TOPIC] Official Lego sets made in LDraw

Recommended Posts

Yes in the "legal" sense you posted the 1st proper set. At the time i didnt think to try to link it through brickshelf. I tried doing it another way and it wouldnt let me do so. With reguards to your posting of 7101 Lightsabre Duel i did find the proper hair piece and hood for Darth Maul and Qui Gon. http://www.ldraw.org/wiki/index.php/Category:Repositories has some parts that are not yet official ldraw releases but most of them work fine.

If you linked it; say it, so it can be in the index :classic:.

Maybe you can send it to someone, who can place it somewhere?

Edited by legolijntje

Share this post


Link to post
Share on other sites

If you linked it; say it, so it can be in the index :classic:.

Maybe you can send it to someone, who can place it somewhere?

Since there are relatively few sets right now, you might want to put the sets in number or alphabetical order. If you wait too long, there'll be too many sets to do that.

Share this post


Link to post
Share on other sites

Since there are relatively few sets right now, you might want to put the sets in number or alphabetical order. If you wait too long, there'll be too many sets to do that.

Yes, that's a good idea :thumbup: !

Share this post


Link to post
Share on other sites

Yes, that's a good idea :thumbup: !

Great! In the long run, it'll be easier to find sets.

I'm churning them out. Had a little time today to finish up another small '99 set:

7128 Speeder Bikes

7128jpg.jpg

Errors:

>Scout Trooper helmet replaced with available alternative. I couldn't decide what to put there, since the only hats with brims show the rest of the face, but in the end I decided to use one anyway, and I picked the Forestman hat since Endor is the forest moon. :laugh:

>30176 and 30239 plant elements were replaced with available alternatives.

>Scout Troopers can't grasp the handle bars. Okay, so they could, but I'm not going to spend and hour or so playing with the angle adjustor. I'll fix it when I update after I finish all the sets.

.ldr file

The base and 74-Zs are grouped separately under steps.

Here's a version with unofficial parts, courtesy of private_lego

Edited by Brickdoctor

Share this post


Link to post
Share on other sites

Errors:

>Scout Trooper helmet replaced with available alternative. I couldn't decide what to put there, since the only hats with brims show the rest of the face, but in the end I decided to use one anyway, and I picked the Forestman hat since Endor is the forest moon. :laugh:

>30176 and 30239 plant elements were replaced with available alternatives.

>Scout Troopers can't grasp the handle bars. Okay, so they could, but I'm not going to spend and hour or so playing with the angle adjustor. I'll fix it when I update after I finish all the sets.

The missing parts are available as unofficial parts on Ldraw.org

30176.dat

30239.dat

30408.dat Not the correct helmet, but still SW

handle bars grip fixed.

Fixed ldr 7128.ldr Unofficial parts needed

Share this post


Link to post
Share on other sites

The missing parts are available as unofficial parts on Ldraw.org

30176.dat

30239.dat

30408.dat Not the correct helmet, but still SW

handle bars grip fixed.

Fixed ldr 7128.ldr Unofficial parts needed

@brickdoctor; can you link in your set post to this fixed version, that's better for indexing.

Share this post


Link to post
Share on other sites

The missing parts are available as unofficial parts on Ldraw.org

30176.dat

30239.dat

30408.dat Not the correct helmet, but still SW

handle bars grip fixed.

Fixed ldr 7128.ldr Unofficial parts needed

@brickdoctor; can you link in your set post to this fixed version, that's better for indexing.

For now, I'm only using official parts, because that way people who only have the official library can still view the models.

I also plan to fix the handlebars...eventually.

Share this post


Link to post
Share on other sites

For now, I'm only using official parts, because that way people who only have the official library can still view the models.

I also plan to fix the handlebars...eventually.

Maybe you can post 2 versions in your post; one whit official parts, and the other one whit unofficial parts.

Share this post


Link to post
Share on other sites

Maybe you can post 2 versions in your post; one whit official parts, and the other one whit unofficial parts.

I might, but I want to fix my model instead of stealing private_lego's, so for now, private_lego, why don't you 'legally' post your version? It's kinda lonely over in the Index. :tongue:

Share this post


Link to post
Share on other sites

I might, but I want to fix my model instead of stealing private_lego's, so for now, private_lego, why don't you 'legally' post your version? It's kinda lonely over in the Index. :tongue:

Stealing ? => sharing sounds better.

Your updated version with the unofficial parts is in my post.

The idea of posting 2 versions, with or without unofficial parts, sounds good. So everybody can choose what he wants.

7128 set with unofficial parts

Share this post


Link to post
Share on other sites

Stealing ? => sharing sounds better.

Your updated version with the unofficial parts is in my post.

The idea of posting 2 versions, with or without unofficial parts, sounds good. So everybody can choose what he wants.

7128 set with unofficial parts

Wait- so you stol- er, shared my model? :laugh:

All righty then, I'll link and credit you soon.

EDIT: Done! Thanks!

Here's my next model from 1999:

7130 Snowspeeder

7130jpg.jpg

Errors:

>Rebel pilot helmets replaced with available alternatives.

>Rotating and moving the wings into the precise angle of the clicky hinges was driving me nuts. It might be off a little bit.

>The printed 4 x 2 slope brick in the nose was replaced with an available alternative.

.ldr file

The P-tower and T-47 are grouped separately under steps.

Edited by Brickdoctor

Share this post


Link to post
Share on other sites

Am I the only one doing this?

Anyways, I finally had time to finish the next model:

7131 Anakin's Podracer

7131.jpg

Errors:

>Printed pieces on the pod replaced with available alternatives.

>Flex tubing not available, and left out since any alternatives would just create a huge mess that still wouldn't flex.

>Anakin's face and torso prints replaced with available alternatives.

>Padme's face, torso, and hair replaced with available alternatives.

.ldr file

Share this post


Link to post
Share on other sites

Am I the only one doing this?

No, of course you're not the only one (but I think you now that).

There are many people who build in ldraw, but I think they don't now there is a topic like this or they don't want to upload. I want to build in ldraw, but I have no patience for Mlcad. Last week I installed SR3D builder, that's much better. :thumbup: The only thing is that I have to "learn" building in SR3D. It's new for me. Maybe it has to get more attention. EB frontpage or something? Anyway, I hope there are coming more sets :sweet: .

Edited by legolijntje

Share this post


Link to post
Share on other sites

No, of course you're not the only one (but I think you now that).

There are many people who build in ldraw, but I think they don't now there is a topic like this or they don't want to upload. I want to build in ldraw, but I have no patience for Mlcad. Last week I installed SR3D builder, that's much better. :thumbup: The only thing is that I have to "learn" building in SR3D. It's new for me. Maybe it has to get more attention. EB frontpage or something? Anyway, I hope there are coming more sets :sweet: .

I'm working on it, but I'm dreading the day when I have to do the UCS MF. :tongue: Think I'll do it like ADHO did for LDD and initially skip the UCSs and Technics, except maybe for the N-1, which is fairly small.

Share this post


Link to post
Share on other sites

Another two models:

2556 Ferrari Formula 1 Racing Car / Model Team

2556_ferrari_formula_1_racing_car.png

MPD File

There are some errors with this model:

  • Part 6069px7 was replaced with part 6069
  • There are no stickers available for this model

21004 Solomon Guggenheim Museum / Architecture

21004_solomon_guggenheim_museum.png

MPD File

Errors: Parts 6636px3, 6636px4 and 6636px5 replaced with part 6636.

I hope there will be more people contributing to this thread, I'm sure there are more members who have sets made in MLCad or similar programs.

Share this post


Link to post
Share on other sites

Nice to see someone else doing this. :classic:

7141 Naboo Fighter

7141.jpg

Errors:

>Anakin's face and torso replaced with available alternatives.

>Slope Brick 45 2 x 2 with Naboo pattern replaced with available alternative.

>Tile 1 x 4s with Naboo pattern replaced with available alternatives.

.ldr file

The hangar vehicle and starfighter are grouped separately under steps.

Share this post


Link to post
Share on other sites

There is some excellent LDrawing going on here, the sets that have been done look great in LDraw. :thumbup:

Very well done to those who have contributed with sets here. :classic:

~buddy~

Share this post


Link to post
Share on other sites

Great work guys :thumbup:

Thanks. :classic:

How far do we go before this is Key Topic-ed? :grin: I should be done with Star Wars 1999 soon.

Share this post


Link to post
Share on other sites

I have most of the Star Wars line in LDraw already but they are using mpd files. Does anyone have a problem with mpd files?

Share this post


Link to post
Share on other sites

I have most of the Star Wars line in LDraw already but they are using mpd files. Does anyone have a problem with mpd files?

Don't think so. Besides, if all of SW was completed in .ldr, I'd get lazy and stop. :grin:

Share this post


Link to post
Share on other sites

I have most of the Star Wars line in LDraw already but they are using mpd files. Does anyone have a problem with mpd files?

That's not a problem. If you want (and have time :laugh: ), you can post them here.

Share this post


Link to post
Share on other sites

I had some free time and I managed to finish some models, so here are another 4 sets:

21002 Empire State Building / Architecture

21002.png

MPD File

Error: Part 4162pb20 was replaced with part 4162.

10016 Tanker / Trains

10016.png

MPD File

Error: Part 6636px2 with part 6636.

6754 Family Home / Creator

6754.png

L3B File (SR 3D Builder)

Error: Part 60800 is missing.

5893 Offroad Power / Creator

5893.png

L3B File (SR 3D Builder)

Error: The string for the winch is missing.

This model is best to be opened in SR 3D Builder, because MLCad may give you a few errors regarding missing parts.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.