[KEY TOPIC] Official LEGO Sets made in LDD

[Aanchir]

Since the release of 4.0, I've been able to complete another Agents set to my satisfaction.

Here's 8633 Speedboat Rescue from the Agents theme! It's in two parts.

LXF File for Part One

LXF File for Part Two

Errors:

• In Part One, Agent Trace should be holding onto the handlebars attached to that chain. I'd be glad if anyone's willing to help with that, but good luck. It's hard enough dealing with handlebars when they're in front of a fig; having a fig hold onto handlebars behind their back is chaos.
• In Part Two, the net is supposed to be folded, rolled, and stashed in the net launcher. This is not possible in LDD. The net has been left to the side
• Likewise, the string is supposed to be tied between the boat and the flick-fire harpoon, then rolled into the ship. This, too, is impossible with LDD. The string has been left to the side.
• Any parts with prints that are unavailable on LDD have been left blank.

I've been hard at work updating my previous sets-- so far I've updated 8969, 8634, 8967, 8630, 6048, 6036, 2586, 6093, 20003, 20008, 20017, and 4993. There are several left to do-- some will take a long time like the Shuttle Adventure and Castle Giant Chess Set-- but rest assured I'm hard at work on many of these remaining sets!

[XimenaPaulina]

Hi everybody,

This is my first contribution to this thread. I'm gonna start with a small classic town set. Designed with the new LDD 4.0

6536 - Aero Hawk / Theme: Town

Download LXF file

Modifications (due to unavailable parts in LDD):

1) 3833/3834 wedge plates was replaced with 3 x 8 wedge plates (left/right)

2) 6069 was replaced with Wedge 4 x 4 Triple with Stud Notches

3) 4859 was replaced with Wing 3 x 4 with 1 x 2 Cutout with Stud Notches

4) Improvised minifig head and torso.

Hope everything is compliant to the rules.

Edited November 1, 2010 by KielDaMan

[Superkalle]

Hi everybody,

This is my first contribution to this thread. I'm gonna start with a small classic town set. Designed with the new LDD 4.0

Hi there KielDaMan

Welcome to this thread

Regarding appliant to rules or not, we have our index master Calabar here, so if you made any mistakes, you will soon hear from him

[XimenaPaulina]

This one holds a special place in my heart since this is my first ever LEGO set.

6521 - Emergency Repair Truck / Theme: Town

Download LXF file here

Modifications (due to unavailable parts in LDD):

1) 4213-4625 Hinge Roof-Tile Combo was replaced with 44570-44822 combo

2) 4864 Panel has no Autoroute pattern

3) 2431 Tile has no Black Wrench pattern

4) Improvised minifig torso.

Edited November 1, 2010 by KielDaMan

[XimenaPaulina]

6672 - Safari Off-Road Vehicle / Theme: Town

Download LXF file here

Modifications (due to unavailable parts in LDD):

1) 4213-4214 Hinge Roof-Panel Combo was replaced with 44570-4482-wall element 1x4x2 windows combo

2) No Safari Stripe Patterns on the doors and front 2x2 tile

3) Car Spring 2 x 2 Wheel Holder (Complete) replaced with modified wheel bearing element 2x2 2/3 + 2x2 plates (2x)

3) 4084-4023 wheel assembly was replaced by Rim 11.2 x Tyre 17.6 assembly

4) Improvised minifig torso for the cameraman.

Edited November 2, 2010 by KielDaMan

[ADHO15]

Here's a lovely set that I thought I'd make as a change from Star Wars: 7573 Battle Of Alamut.

LXF File

As mentioned in the errors topic, the new flame part doesn't fit in the telescope part.

Correct prints are replaced/missing

@KDM: It's LXF file, not xlf.

Good start. Just stay away from SW!

Edited November 8, 2010 by ADHO15

[prateek]

Updated to LDD 4

Made by someone else before, but I updated it in LDD 4.0

8097 Slave 1

LXF File

No ARC accessories.

Edited October 31, 2010 by prateek

[ADHO15]

No ARC accessories and Carbonite Block.

The new carbonite block is in the minifig accessories section towards the end.

You also have to say when the set has been made someone else already.

[prateek]

The new carbonite block is in the minifig accessories section towards the end.

You also have to say when the set has been made someone else already.

Alrighty then. I made the changes

Note the picture is the same though, as I'm too lazy

[Aanchir]

Here's a lovely set that I thought I'd make as a change from Star Wars: 7573 Battle Of Alamut.

LXF File

As mentioned in the errors topic, the new flame part doesn't fit in the telescope part.

Hand-blade accessory is missing from LDD

Pearl/Warm and Metallic Gold have been replaced by Reddish Gold.

Correct prints are replaced/missing

Updated to LDD 4

@KDM: It's LXF file, not xlf.

Good start. Just stay away from SW!

Warm Gold can actually be obtained by clicking View>New Themes>DesignByMe at the top of the screen. This gives you the DesignByMe palette, which contains some Warm Gold parts-- I tend to use the goblet in the Minifig Accessories category. Place a warm gold part, then just click View>New Themes>LEGO Universe, and you'll be able to use the eyedropper tool to get the color you want.

Metallic Gold is a harder color to get, since I don't know its official name or color code. But I tend to use 147 Sand Yellow Metallic, which is the closest match in available colors. It appears if you hover the cursor over Reddish Gold.

Also, the hand-blade is on there. It's part 88812. I'll admit, it took me a while to find it (it's hard to identify by its thumbnail) and I only knew to look for it because I had seen it when I first went through to see how many new parts were in 4.0.

Edited October 31, 2010 by Aanchir

[Superkalle]

Metallic Gold is a harder color to get, since I don't know its official name or color code. But I tend to use 147 Sand Yellow Metallic, which is the closest match in available colors. It appears if you hover the cursor over Reddish Gold.

Aanchir, do you have a list of more colors where you don't know the official name and color, and I can try to do some investigations. It would also be good with some (fairly recent) example sets and parts where that color is used.

BTW: I'm now proclamining you our LDD Master of LEGO Colors

Alrighty then. I made the changes

Note the picture is the same though, as I'm too lazy

I think he meant - who did the original set that you modded into LDD4 version?

[ADHO15]

Warm Gold can actually be obtained by clicking View>New Themes>DesignByMe at the top of the screen. This gives you the DesignByMe palette, which contains some Warm Gold parts-- I tend to use the goblet in the Minifig Accessories category. Place a warm gold part, then just click View>New Themes>LEGO Universe, and you'll be able to use the eyedropper tool to get the color you want.

Metallic Gold is a harder color to get, since I don't know its official name or color code. But I tend to use 147 Sand Yellow Metallic, which is the closest match in available colors. It appears if you hover the cursor over Reddish Gold.

Also, the hand-blade is on there. It's part 88812. I'll admit, it took me a while to find it (it's hard to identify by its thumbnail) and I only knew to look for it because I had seen it when I first went through to see how many new parts were in 4.0.

Thanks for the help, Colour Master.

I wasn't aware Warm Gold could still be obtained that way. I'm updating that in my recent sets now.

I used the Metallic Sand Yellow for Metallic Gold. Maybe it would be good for everyone to use the same substitute colour for missing colours.

I use Silver for Metallic Light Grey and Chrome Silver.

I don't know how I missed it. It'll be fixed on the updated version soon.

I think he meant - who did the original set that you modded into LDD4 version?

Actually, I meant prateek noting that both you and I made that set before he did, as per Calabar's new rule.

I do plan to update my own version to LDD4 along with all my other sets.

EDIT: Updated 7573 Battle of Alamut

Edited October 31, 2010 by ADHO15

[Calabar]

Important Notice !

I created a Topic where report LDD3 to LDD4 update of your sets!

Post there and not here!

NOTE: post there even if you have already posted here!

Edited November 1, 2010 by Calabar

[ADHO15]

Another Prince Of Persia set for tonight: 7572 Quest Against Time.

LXF File

Scimitars are unable to fit into 'Technic, Axle and Pin Connector Angled #1'

Correct prints missing/replaced

Updated to LDD 4

Edited November 1, 2010 by ADHO15

[Aanchir]

UPDATE 4/24/2011: Updated to LDD 4.1.

Here's a set that LDD 4 recently allowed me to proceed with: 8708 Cave Crusher from the Power Miners theme.

LXF File

Errors:

• Part 85049 (the Rock Monster's body) cannot be colored separate colors. Its legs and teeth should be colored 41 Trans. Red. The whole body has been left 199 Dark Stone Grey.
  
• I was not able to mount the bright orange saw blade in its launcher to my satisfaction. It has been left to the side.

Edited April 24, 2011 by Aanchir

[marco9999]

4402 - Sea riders - Creator

Updated to LDD 4.1.7

LXF

Errors

- Wings 3933 and 3934 not available; replaced with other parts.

- Windscreen x224 not available; replaced with wedges 41749 and 41750 which externally look the same, but internally they leave no room for the seat's headrest, which is left aside.

- The cockpit cannot be perfectly closed.

- The available universal joint (61903) is shorter than the required one (3712c01); it was then necessary to use longer axles. The alignment tool was not useful to connect those joints, they had to be aligned with small manual adjustements.

- The exhaust tubes 75535 can't be connected to 1x4 brick w.4 knobs by vertical studs.

4918 - Mini flyers - Creator

Downloand lxf: 1 2 3

Same comment about the windscreen colour.

Edited May 11, 2011 by marco9999

[marco9999]

- 10021 - USS Constellation - by marco9999

Lists of previously reported irregular sets here and here.

I don't know how to fix it. The problems I see with this models are the ones which have already been reported: impossible connections lattice+studs and unavailable parts. Please give me some hints.

Thanks.

Edited November 1, 2010 by marco9999

[Calabar]

I don't know how to fix it. The problems I see with this models are the ones which have already been reported: impossible connections lattice+studs and unavailable parts. Please give me some hints.

Thanks.

The post is "illegal" simply because the preview image is too big (maximum size allowed is 512x512)

Nothing related to how the set is built!

PS: you did double post!

[XimenaPaulina]

@KDM: It's LXF file, not xlf.

Good start. Just stay away from SW!

Sorry, LDD noob mistake. Thanks for pointing out. Already fixed!

Don't worry I'll let you do the SW sets. Somebody has got to give Classic Town some love, might as well be me (a Classic Town lover-inside ).

Here's a couple more contributions for Classic Town:

6509 - Red Racer / Theme: Classic Town

Download LXF file here

Modifications (due to unavailable parts in LDD):

1) 2452-4276 Hinge Combo replaced with 60471-44301 combo

2) 3298 slope brick has no Number 3 Pattern

3) Improvised minifig torso.

-----

6648 - Mag Racer / Theme: Classic Town

Download LXF file here.

Modifications (due to unavailable parts in LDD):

1) 4275-4276 Hinge Combo replaced with 44301-44302 combo

2) 6069 Wedge was replaced by 48933

3) Car Spring 2 x 2 Wheel Holder (Complete) replaced with modified wheel bearing element 2x2 2/3 + 2x2 plates (2x)

4) 2569 Antenna Whip was replaced by 105 Antenna Whip with flag

5) No sticker on designated parts

6) Improvised minifig torso

Edited November 2, 2010 by KielDaMan

[Aanchir]

4402 - Sea riders - Creator

LXF

Errors

- Wings 3933 and 3934 not available; replaced with other parts.

- Windscreen x224 not available; replaced with wedges 41749 and 41750 which externally look the same, but internally they leave no room for the seat's headrest, which is left aside.

- The cockpit cannot be perfectly closed.

- The available universal joint (61903) is shorter than the required one (3712c01); it was then necessary to use longer axles. The alignment tool was not useful to connect those joints, they had to be aligned with small manual adjustements.

- For the transparent parts, it is required a "smoke" colour; for that I used "transparent brown"; I hope it fits.

4918 - Mini flyers - Creator

Downloand lxf: 1 2 3

Same comment about the windscreen colour.

Color-wise, Transparent Brown is the smoke color you were looking for. Transparent Brown is the official name LEGO uses.

[XimenaPaulina]

6009 - Black Knight / Theme: Castle (Black Knights)

Download LXF file here

Modifications (due to unavailable parts in LDD):

1) Plain black torso was used instead of printed one

2) No print on the shield and horse

Edited November 2, 2010 by KielDaMan

[Aanchir]

6009 - Black Knight / Theme: Castle (Black Knights)

Download LXF file here

Modifications (due to unavailable parts in LDD):

1) Plain black torso was used instead of printed one

2) No print on the shield and horse

None of your images are working, because for some reason you've got some random numbers in the front (between the http:// and the www). Could you fix that problem in your posts?

[ADHO15]

7264 Imperial Inspection (LDD 4.3.5 - Star Wars: Episodes 4/5/6)

LXF File

ERRORS:

Replaced part 30283 with 60219

Incorrect/missing prints

7754 Home One Mon Calamari Star Cruiser (LDD 4.3.5 - Star Wars: Episodes 4/5/6)

LXF File

ERRORS:

Missing parts 78c09 and x77ac50

Incorrect/missing prints and stickers

Part 32187 cannot connect to part 2780 (Book 1 p20)

Collision errors (Book 1 p55)

Collision error between parts 32278 and 57585 (Book 1 p70)

Collision error between parts 32062 and 3737 (Book 2 p24)

Collision error between parts 3706 and 32064 (Book 2 p37)

Cannot connect 2x 60934 (Book 2 p39)

Edited September 26, 2012 by ADHO15

[merman]

10215 - OBI WAN'S JEDI STARFIGHTER

Needed to make some small adjustments, like on the top of the cockpit and the hinged-wings, but set

10215 turned out pretty nice:

For the fil go to: http://www.brickshelf.com/gallery/merman/10215/10215.lxf

Edited February 28, 2013 by Calabar
Link Fixed

[prateek]

That is awesome, and I can't help but notice you have the upgraded graphics. What are your computer stats?