Calabar

[KEY TOPIC] Official LEGO Sets made in LDD

Recommended Posts

@ilulz

Very good, I see you have created your brickshelf gallery. You can use it for the set 1782 too.

You should fix the image of the second set, removing the background. And don't forget to remove blank/white stripes around the image!

Share this post


Link to post
Share on other sites

@ilulz

Very good, I see you have created your brickshelf gallery. You can use it for the set 1782 too.

You should fix the image of the second set, removing the background. And don't forget to remove blank/white stripes around the image!

Alright I put better images up and switched the first one over to brickshelf.

Share this post


Link to post
Share on other sites

@ilulz

Still have some problem with the images:

- 1782: some parts of the set has been cut off. The image need to be cropped (large white stripe on bottom)

- 6441: some parts of the set has been cut off. The image need to be cropped (white stripe on top)

- 6442: The image need to be cropped (large white stripe both on top and on bottom)

- 6555: Image is well done, but it is too big for such a small set. I suggest you no more than 256x size.

- 6556: Image is well done, but it is oversized and violate topic's rules (maximum size is 512x512 px). A good resize could be 384x170.

Two suggestions:

- carefully read the rules of the topic in the first post.

- take a look at this guide, it could help you to create screenshots.

- you can use brickshelf to upload images too, non only lxf files. It is not a problem, but it could be more comfortable for you to use the same file osting for both lxf files and images.

Ask me if you don't understand something or you need some help.

Share this post


Link to post
Share on other sites

This next post should finish off the Dino / Dino Attack / Dino 2010 category for good. I am aware that 5887 Dino Defense HQ has already been indexed, but the previous version had a number of inaccuracies and included extra elements such as bushes that were not in the original set, and this new version should correct many of those errors while removing the extraneous elements.

5887 - Dino Defense HQ - Theme: Dino (DUPLICATE)
[bricklink] [brickset]

5887_dino_defense_hq.png

[5887 LXF]

Errors:
- Missing/incorrect decorations
- 98166 Dino Coelophysis has been substituted with 54125 Compy
- The raptor cannot be dual-colored Medium Nougat, Dark Orange, and Brick Yellow
- Dino T-Rex has been substituted with the Dinosaurs set 6270 Tyrannosaurus Rex
- 64288 Nose Cone Small 1X1 - Tr has been substituted with 59900 Nose Cone Small 1X1
- 56823 String Poly 0,5Mm On Spool is not included

5888 - Ocean Interceptor - Theme: Dino
[bricklink] [brickset]

5888_ocean_interceptor.png

[5888 LXF]

Errors:
- Missing/incorrect decorations
- The pteranodon's body and wings cannot be dual-colored Olive Green and Earth Green
- 64288 Nose Cone Small 1X1 - Tr has been substituted with 59900 Nose Cone Small 1X1
- 71155 Net 10X10 cannot be attached to the rest of the model

7294 - Dino Quad - Theme: Dino 2010
[bricklink] [brickset]

7294_dino_quad.png

[7294 LXF]

Errors:
- Incorrect/missing decorations

7295 - Dino Buggy Chaser - Theme: Dino 2010
[bricklink] [brickset]

7295_dino_buggy_chaser.png

[7925 LXF]

Errors:
- Incorrect minifigure decorations
- 30191 Strap 12 M is not flexible and cannot attach to the other three 4599 Tap 4.9/6.4 bricks.
- Dino Attack Raptor has been substituted with Dino Raptor.
- 56823 String Poly 0,5Mm On Spool is not included

7298 - Dino Air Tracker - Theme: Dino 2010
[bricklink] [brickset]

7298_dino_air_tracker.png

[7298 LXF]

Errors:
- Missing/incorrect decorations
- Dino Attack Pteranodon has been substituted with Dino Pteranodon
- Dino Attack T-Rex has been substituted with Dino T-Rex
- 32551 Voodoo Hook has been substituted with 57565 Weapon 3 2007
- 2907 Gyro-Ball has been substituted with 32270 Double Conical Wheel Z12 1M
- 71949 Corrugated Pipe 80Mm has been substituted with 71986 Corrugated Pipe 88Mm
- 6211 Spiral Tube W. Flange has been substituted with 64230 Spiral Tube W. Tube Stud
- 6211 Spiral Tube w. Flange is inflexible and cannot be connected on both ends
- 71762 Brick 1X6 W/Bow cannot be attached to the rest of the model due to a collision error
- 71155 Net 10X10 cannot be attached to the rest of the model
- 56823 String Poly 0,5Mm On Spool is not included

EDIT: Corrected inaccuracies in 7298.
EDIT 3/7/13: Updated 5887 and 7298 to LDD 4.3.6.
EDIT 3/8/13: Corrected inaccuracy in 5887.
EDIT 3/26/13: 5887 and 7298 bug fixes.
EDIT 12/16/13: Updated 7298 to LDD 4.3.8.
EDIT 1/31/14: Updated 5887 to LDD 4.3.8.
EDIT 11/27/14: Updated 7295 and 7298 to LDD 4.3.8, Brick Version 1564.2.
EDIT 12/8/14: Updated 5887 to Brick Version 1564.2.

Edited by PeabodySam
Fixing post-update post formatting.

Share this post


Link to post
Share on other sites

6456 - Mission Control - Town / Space Port

6456_mission_control.png

6456_mission_control.lxf

Missing bricks:

2625 replaced with 50303

30283 replaced with 60219

6230 replaced with 4264 + 3139

4859 replaced with 48183

6069 replaced with 48933

43903 - 30211 - 30351 - 30354 - 2422 replaced with brick-built solutions, grouped separately.

30082 and 3619 not replaced

Ribbed hose 14L not flexible - replaced with 16L

Flexible hose 13L not flexible - replaced with 17L

Stickers missing, improper decorations.

Share this post


Link to post
Share on other sites

7298 - Dino Air Tracker - Theme: Dino 2010

Errors:

- 71762 Brick 1X6 W/Bow cannot be attached to the rest of the model due to a collision error

You used the wrong plates. Replace 1x12 Dbley ones with 1x10's and the the bows should fit.

Share this post


Link to post
Share on other sites

You used the wrong plates. Replace 1x12 Dbley ones with 1x10's and the the bows should fit.

... Well, that ought to do it. Boy, am I sheepish. Just goes to show you how making one small error in construction can come back to haunt you later on.

Share this post


Link to post
Share on other sites

This is the rest of the Divers theme sets that lego.com has instructions for.

6558 - Shark Cage Cove - Theme: Divers

6558.png

Download: 6558

Errors:

- LDD missing 2627, used 2626

- LDD missing 4318 and 2375, used an amalgamation of other pieces to achieve something similar

- LDD missing 3127, used 30395

- LDD missing 73037 used Calabar's design

- Missing stickers

6559 - Deep Sea Bounty - Theme: Divers

6559.png

Download: 6559

Errors:

- LDD missing 4318 and 2375, used an amalgamation of other pieces to achieve something similar

- LDD missing 3127, used 30395

- LDD missing 30079 used 2463 and 2462

- All pieces required to be unattached to a block placed off the set

- LDD missing 73037 used Calabar's design

- Missing stickers

6560 - Diving Expedition Explorer - Theme: Divers

6560.png

Download: 6560

Errors:

- LDD missing 2632 used 2622

- 2351 and 2350 do not fit together as they should

- LDD missing x99

- LDD missing 30079 and 30080 so I made something similar

- LDD missing 2428 made a substitute

- LDD missing 73037 used Calabar's design

- Missing stickers

Edited by ilulz

Share this post


Link to post
Share on other sites

6020 : Magic Shop

8496735359_1f1ee861d6.jpg

errors

piece 4524 canot be pleaced on minifigure thanks to Anchir

mising prints for wizard body and 2x2 tile

lxf : http://www.brickshelf.com/gallery/vistuk/lfx/6020.lxf

(and Calabar I fix image in heng glider and sheriff house is complete with lxf and image)

Edited by Instructions archiver

Share this post


Link to post
Share on other sites

6020 : Magic Shop

errors

piece 4524 canot be pleaced on minifigure

mising prints for wizard body and 2x2 tile

lxf : http://www.brickshel...uk/lfx/6020.lxf

(and Calabar I fix image in heng glider and sheriff house is complete with lxf and image)

You actually can have the cape and beard on the fig at the same time, it just takes a couple steps:

  1. Build the minifig with no cape or beard.
  2. Attach the beard.
  3. Use the "Multiple Selection" tool to select the head, hat, and beard.
  4. Remove the head, hat, and beard and place them aside.
  5. Put the cape on the minifigure's neck stud.
  6. Select the head, hat, and beard again.
  7. Move them onto the minifigure

The reason why you can't just place the parts normally is that the beard technically "connects" to the neck stud, not the underside of the minifig head where it is actually physically nested. And since the neck stud is only programmed with one "connection point" for neck accessories, LDD won't register the connection between the beard and the neck stud unless the beard is flat against the "shoulders" of the minifig. By raising the beard up a slight amount by moving it together with the head, the fig can be built with no collisions even though the beard won't be "connected" to the rest of the fig in LDD's terms.

Share this post


Link to post
Share on other sites

I've had too much free time.

Theme: Exploriens

6899 - Nebula Outpost - Theme: Exploriens

v- this is not white space, there are antennas :)

6899.png

Download: 6899.lxf

Errors:

- LDD missing 2607, 73092 left unattached

- LDD missing correctly printed torsos and heads

6982 - Explorien Starship - Theme: Exploriens

6982.png

Download: 6982.lxf

Errors:

- LDD missing 2880, replaced with 2433 (aesthetic only)

- LDD missing 4504, used brick built solution

- LDD missing 2607

- LDD missing 30034, used brick built solution

- LDD missing 30037, used brick built solution

Theme: Time Cruisers

6491 - Rocket Racer - Theme: Time Cruisers

6491.png

Download: 6491.lxf

6492 - Hypno Cruiser - Theme: Time Cruisers

6492.png

Download: 6492.lxf

6493 - Flying Time Vessel - Theme: Time Cruisers

6493.png

Download: 6493.lxf

Errors:

- LDD missing 6051 and 6053, used brick built solutions

- LDD missing 2983, used similar (aesthetic only)

- LDD missing 2918 and 2917, used brick built solution

6494 - Mystic Mountain Time Lab - Theme: Time Cruisers

6494_1.png

Download: 6494.lxf

Errors:

- LDD missing 4071 and 4611, replaced with brick built solution

- LDD missing 3149, used brick built solution

- Unable to place the part left aside, that uses 2 4185s and a 3960, in correlation with 6082

(I placed an aesthetic version inside the model)

6495 - Time Tunnelator - Theme: Time Cruisers

6495.png

Download: 6495.lxf

Errors:

- LDD missing 476, used brick built solution

- LDD missing 2983, replaced with similar brick

- LDD missing x66

6496 - Whirling Time Warper - Theme: Time Cruisers

6496.png

Download: 6496.lxf

Errors:

- 6016 does not fit into 6556

- LDD missing 2983, used similar piece

6497 - Twisted Time Train - Theme: Time Cruisers

6497.png

Download: 6497.lxf

Errors:

- LDD missing 2983, used similar piece

- LDD missing 2046, used brick built solution

All of these are missing a few properly printed pieces.

Edited by Calabar
: Fixed some errors

Share this post


Link to post
Share on other sites

6496 - Whirling Time Warper

Errors:

- 6016 does not fit into 6556

Are you sure it's not supposed to be 60594, because 6016 fits into that?

Share this post


Link to post
Share on other sites
v- this is not white space, there are antennas :)

Did you try the trick reported in the screenshot guide of overlapping screenshot with itself to fix the problem of LDD with transparent bricks?

6892 - Explorien Starship

The set's number is 6982! :wink:

Theme: ...

Please report the theme for each set! :classic:

Share this post


Link to post
Share on other sites

8070 - Super Car (Model B "Hot Rod") - Technic

8070h.jpg

Errors:

- The "4227853 Black Lt Wheel Bearing w/3 Snaps" are not available

- On the back, are 3 Parts missing:

1st: the "Sidebars from the Door, to the trunk

2nd: Connecting (stabilizers) on the Roof

3rd: Sidepipes are not full installed

because the LDD got some Problems to connect "touching" parts.

- Missing Tires fort the Rim's

- Front Suspensions are not available, because LDD will crash, if you try to connect them.

The LXF:

https://docs.google....dit?usp=sharing

Edited by Balthasar_the_Dark
Oversized image converted in text links. Maximum size allowed is 512x512.

Share this post


Link to post
Share on other sites

@ Balthasar_the_Dark: You should have mentioned that your red vehicle above is the Lego Technic 8070 B-Model (Hot Rod).

Image

Edited by Calabar
: Image converted in text link. Only set's preview images are allowed in this topic.

Share this post


Link to post
Share on other sites

@Balthasar_the_Dark

Welcome in the LDD Official Sets topic!

There are some thins to fix in your post to make your entry regular.

- The set's data (setid, name, theme) are not reported and highlighted. Take a look at the posts of other users as example.

- The image of your post is not regular, so I temporarily converted it in a text link.

You can read all the rules of the topic (related to images and other things) in the first page.

Here is a short guide that could help you with the image of the set.

@DLuders

I converted your image in text link. Only sets preview are allowed in this topic. :classic:

Share this post


Link to post
Share on other sites

@Instructions archiver

Nice work; I've got quite a few memories attached to that particular set! However, just at first glance, I noticed right away a number of errors that need to be corrected:

- The Res-Q fireman should have Black hands and a White 3834 Mini Fireman Helmet

- The grip should have Yellow arms and Dark Grey hands

- The stuntman should have Dark Grey hands

- The actress should have an Earth Orange 6093 Wig, Ponytail

- The assistant should have White arms

- Wherever you used Light Stone Grey should be Grey instead

- Wherever you used Dark Stone Grey should be Dark Grey instead

- Wherever you used Tr. Bright Orange should be Tr. Fluore.Redd. Orange instead

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.