Julius

[MOC] Pirate Ship (Pirate Squid)

Recommended Posts

blogged.png

Pirate Squid

Architeuthis Pirata commonly known as "Pirate Squid, Terror of the Seven Seas". Captain Kraken and his crew of Marauding Mollusks are not passing up any opportunity to pillage and plunder. Build in a little under two month for the BrickNerd “pi-RATS & BUG-aneers” contest. Based on the frame of the Silent Mary, the whole bow/head section can lift up to show-off the kraken's fearsome mouth. I'd love to add more rigging but did run out of time and string. The sails are original lego, dyed with black fabric dye. Thanks to the Eurobrics community for sharing so many great builds to use as inpiration.

#piRATSandBUGaneers
#BrickNerd
#LEGOpiratecontest

Edited by Marooned Marin
Blogged on the Classic-Pirates.com

Share this post


Link to post
Share on other sites

This is cool looking ship, looks amazing, so many cool details. I love the rigging :pir-thumb:

If you have, you can add more images here on the forum.

Is it sturdy when picked up, and did you keep account on how many parts went into it?

Share this post


Link to post
Share on other sites
20 hours ago, Julius said:

Pirate Squid

Architeuthis Pirata commonly known as "Pirate Squid, Terror of the Seven Seas". Captain Kraken and his crew of Marauding Mollusks are not passing up any opportunity to pillage and plunder. Build in a little under two month for the BrickNerd “pi-RATS & BUG-aneers” contest. Based on the frame of the Silent Mary, the whole bow/head section can lift up to show-off the kraken's fearsome mouth. I'd love to add more rigging but did run out of time and string. The sails are original lego, dyed with black fabric dye. Thanks to the Eurobrics community for sharing so many great builds to use as inpiration.

#piRATSandBUGaneers
#BrickNerd
#LEGOpiratecontest

Wow this is really mindblowing. I love this SHip :pir-love: Salute to you Mate!:pir-huzzah2: 

Share this post


Link to post
Share on other sites
16 hours ago, Marooned Marin said:

This is cool looking ship, looks amazing, so many cool details. I love the rigging :pir-thumb:

If you have, you can add more images here on the forum.

Is it sturdy when picked up, and did you keep account on how many parts went into it?

Thanks Mate, below some additional pictures.

The ship is very stable due to the sturdy technic frame that I borrowed from the Silent Mary, set 71042. The rigging is helping the masts to stand up but they also have technic axles inside.

It's actually sturdy enough to bend at the front of the main deck to allow an agressive pose for the squid to attack.

I've no idea how many parts went into it though.

Pirate Squid_Play Feature

 

Pirate Squid_Attack

 

Pirate Squid_Stern

 

Pirate Squid_Bow

 

Pirate Squid_Starboard

 

 

3 hours ago, CaptainPolluxofOrion said:

Wow this is really mindblowing. I love this SHip :pir-love: Salute to you Mate!:pir-huzzah2: 

Thanks for your kind words here and on my flickr post! :pir-thumb:

 

Edited by Julius

Share this post


Link to post
Share on other sites
On 9/7/2022 at 1:14 AM, PxChris said:

Quite a wildly spectacular beasty ship to behold!

Thanks mate!

Share this post


Link to post
Share on other sites
On 9/9/2022 at 6:58 PM, Wellesley said:

Great build!

Cool concept and good execution.

There are some interesting hull techniques.

Thanks, had those technic panels laying around for a while, and they just worked perfectly to render the curved shape of the lower part of the hull. 

Share this post


Link to post
Share on other sites

@Julius

How long did you build this? What was your process, first digital, or you went directly to the real build?

I just saw on your Flickr account the secret behind the windows of the cabin. That is ingenious solution! :pir-thumb:

Share this post


Link to post
Share on other sites
15 hours ago, Marooned Marin said:

@Julius

How long did you build this? What was your process, first digital, or you went directly to the real build?

I just saw on your Flickr account the secret behind the windows of the cabin. That is ingenious solution! :pir-thumb:

Thanks mate.

I'm not much of a digital builder. I tried it a few times but I find the process much less creative and I can't get a good flow. So it's always straight up physical bricks for all my builds.

I settled on the idea of merging a ship with a giant squid right away after I read about the BrickNerd contest. I also ordered a bunch of parts, like the tentacles, sails, string, stickers, and a few minifigures to complate the crew. Once I decided to go for the squid I knew I wanted to have a play feature to allow it to raise its bow/head. Since I only had two month in total, until the deadline of the competition, I needed a solid frame structure that would inlcude the play feature and that I could build quickly, without the need of too many trail and error modifications later in the building process. So I used the technic frame of the Silent Mary which already included the hinged solution for the play feature.

Going directly to building the frame I did a lot of research about hull techniques, masts and rigging. At that point I decided I wanted to use the grey technic panels for the lower hull but had yet to figure out how to connect them in a way that would allow them to flex a little while providing enough stability. After completing the frame I build the main and the forecastle deck, then outlined the dimensions of the upper deck and the poop deck. Moving on to the black hull panels of the gun deck, the overall proportions where set, which allowed me to decide on the best position for the three masts and I was able to complete all decks. The poop deck and captains cabin below as well as the squids tail, maw, tentacles and masts are all modular, held in place with technic pins. I build them as separate assemblies before attaching the grey technic hull panels. This allowed me to keep the overall build size maneuverable so it was easier to handle while building the technic panel hull sections. The stern was a bit of trial and error until I had found the right wedged panels that allowed for smooth transiotions. Next I moved on to the squids head that I build around the maw.

After the hull, deck and guns where complete I moved on to the masts, dyed the original Lego sails - wich looked way to clean for the ship - completed the rigging and added a few details and stickers. I had ordered four blue 32x32 baseplates which I used to build the base. At that point there where about 5 days left before the two month deadline so I couldn't be to fuzzy about the look of the waves and water splash details. I felt like the ship all by itself looked a little lonely so I decided to add the outrigger canoe which forced me to rebuild a small section of the waves. With 3 day left and the clock winding down I rushed to take some photos. Lucky enough it was a beautiful overcast day and I managed to light everything with sunlight, as the build didn't fit in my lightbox. Some post processing in Photoshop and the thing was ready to be submitted a day before the deadline. 

Share this post


Link to post
Share on other sites

@Julius Thank you for your detailed answer, this is very helpful and will serve well for a mighty good Blog-post on Classic-Pirates (hope you are a reader fan our blog) :pir-huzzah2:

I have you and your creation bookmarked for sometime in the near future.

Say... beside Flickr, do you have Instagram for people to follow your work?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.