A_C Posted October 30, 2021 (edited) This MOD upgrades your CAT D11 as below: - increase the blade lifting speed by 67% (the Control+ app needs to be calibrated after this MOD) - close the gaps near the front panels - make the front linear actuators look stronger - replace the rear fake linear actuators with a real one; they can be controlled manually to tilt the ripper - add 2 fire extinguishers near the cabin 115 extra parts are needed. The most expensive parts are the 2 black linear actuators (43097). Replace them with the LBG one (61927b) is fine. Or just like me, sprayed the LBG one with semi-gloss black. Instruction available at https://rebrickable.com/mocs/MOC-91485 Enjoy and have fun! Edited October 30, 2021 by A_C Share this post Link to post Share on other sites
Richombx Posted October 31, 2021 Using the compare parts feature I see that you have the 115 parts split into two groups, is there a reason for this? Share this post Link to post Share on other sites
A_C Posted October 31, 2021 10 hours ago, Richombx said: Using the compare parts feature I see that you have the 115 parts split into two groups, is there a reason for this? You don't have to use that compare parts function. The 115 parts are already the extra parts needed for this MOD. Share this post Link to post Share on other sites
A_C Posted November 9, 2021 (edited) It's just updated to v1.1: - hide the blade's tilting shafts on both sides (the Control+ app needs to be calibrated after this MOD) - change the headlights position - add side mirrors - need 84 more parts than v1.0; a CSV file is provided for download Edited November 9, 2021 by A_C Share this post Link to post Share on other sites
A_C Posted November 28, 2021 Hi, It's updated to v2.0: - modify the ripper - add a screw driver (mostly from the remaining parts) for tilting the ripper - the body can now to be raised by the blade and the ripper 216 extra parts are needed. Instruction available at https://rebrickable.com/mocs/MOC-93838 Share this post Link to post Share on other sites
Al Ex Posted November 29, 2021 (edited) I think the best way is to use the ladder manuell and the Rc function for the 2 new Ripper actuators or manuell switch between Rc ladder and Rc Ripper actuators Edited November 29, 2021 by Al Ex Share this post Link to post Share on other sites
A_C Posted November 29, 2021 15 hours ago, Al Ex said: I think the best way is to use the ladder manuell and the Rc function for the 2 new Ripper actuators or manuell switch between Rc ladder and Rc Ripper actuators That's a nice thought, but definitely out of my skill. Share this post Link to post Share on other sites
Ngoc Nguyen Posted November 29, 2021 15 hours ago, Al Ex said: I think the best way is to use the ladder manuell and the Rc function for the 2 new Ripper actuators or manuell switch between Rc ladder and Rc Ripper actuators The best way is to go full PF Share this post Link to post Share on other sites