Kdapt-Preacher

[MOC] KdaptPreacher's 1:1455 Fleet --- 163 ships and counting (New: BT-7 Thunderclap)

Recommended Posts

 

9lcmru7.png

So over the last couple of months I've designed a bunch of ship models... and by 'a bunch' I mean 103 155 158 162 163! All of these ships are built to scale with the UCS Imperial Star Destroyer, which is 1:1455, or about 11.64 meters per stud. There are way too many ships here for me to post individual photos of all of them in this thread, but all the photos you want--as well as the Stud.io files and free step-by-step PDF instructions for all of them--are available on Rebrickable here: https://rebrickable.com/users/Kdapt-Preacher/mocs/

I'm putting the full list of ships in a spoiler because it's very long. How many do you recognize?

Spoiler

1. CR90 corvette (Unnamed Phoenix Cell)
2. CR90 corvette (Rancor's Tooth)
3. CR70 corvette (Sundered Heart/Tantive IV (RotS))
4. CR90 corvette (Unnamed Phoenix Cell)
5. CR90 corvette (Crymorah pirate corvette)
6. CR90 corvette (Candor, etc)
7. CR90 corvette (Vorknkx)
8. CR90 corvette (Liberator)
9. CR90 corvette (Talon, etc)
10. CR90 corvette (Ahsoka's corvette, etc)
11. CR90 corvette (Judicator, etc)
12. CR90 corvette (Bail Organa)
13. CR90 corvette (Scarlet Thranta)
14. CR90 corvette (Jaina's Light)
15. CR90 corvette (Badlands, etc)
16. CR90 corvette (Renthal's Fist)
17. CR90 corvette (Howlrunner, etc)
18. CR90 corvette (Tantive IV, etc)
19. IPV-2C stealth corvette
20. Imperial Customs Corvette
21. Braha'tok-class Dornean Gunship
22. Moomo Williwaw
23. Banshee
24. Halo
25. Raider-class corvette
26. GX1 Short Hauler
27. Jade Sabre
28. Ebon Hawk
29. VT-49 Decimator
30. Arquitens-class cruiser (Republic)
31. Rogue Shadow
32. Consular-class cruiser
33. Slave II
34. Bo-Katan's Kom'rk-class fighter (TCW)
35. Lady Luck
36. C-9979 landing craft (CIS)
37. C-9979 landing craft (Trade Fed)
38. Sentinel-class landing craft
39. DP20 gunship
40. Weequay pirate ship
41. Twilight
42. Splendour
43. Bo-Katan's Kom'rk-class fighter (Mando)
44. J-type diplomatic barge
45. Count Dooku's solar sailer
46. Mist Hunter
47. Defender-class light corvette
48. CR92a Assassin-class corvette
49. Nu-class assault shuttle
50. Mobquet Medium Transport
51. Havoc Marauder
52. Cantwell-class Arrestor Cruiser
53. MG-100 Starfortress
54. GR-75 transport
55. Class 4 Container Transport
56. Theta-class landing barge
57. Little Bivoli
58. Imperial Cargo Shuttle
59. Vermin-Thrax
60. Shadow Caster
61. Sphyrna-class Hammerhead corvette (Rebels)
62. Obi-Wan's PLY-3000
63. Y-wing
64. TIE Brute
65. TIE bomber
66. TIE fighter
67. Death Watch Kom'rk-class fighter
68. YT-2000
69. Barloz-class freighter
70. Eta-class supply barge
71. Fury-class Imperial interceptor
72. Razor Crest
73. Vigil-class corvette
74. Ghost
75. Quasar Fire-class cruiser/carrier
76. Sphyrna-class Hammerhead corvette (Rogue One)
77. Punishing One
78. Stinger Mantis (Smuggler)
79. Stinger Mantis (Starfighter)
80. Stinger Mantis (Gold Squadron)
81. Stinger Mantis (Racer)
82. Stinger Mantis (Occultation)
83. Stinger Mantis (Zodiac Drifter)
84. Stinger Mantis (Perihelion)
85. Stinger Mantis (Republic)
86. Stinger Mantis (Greezy Money)
87. Stinger Mantis (Crimson)
88. Stinger Mantis (Bounty Hunter)
89. Stinger Mantis (Mercenary)
90. Stinger Mantis (Vanguard)
91. Stinger Mantis (Charisma)
92. Stinger Mantis (Apehelion)
93. Stinger Mantis (Original)
94. Outrider
95. Coronet
96. Jabitha
97. Jaster's Legacy
98. EF76 Nebulon-B Escort Frigate
99. Platoon Attack Craft (CIS)
100. Platoon Attack Craft (Trade Fed)
101. H-type Nubian yacht
102. Corvus (New Republic)
103. Arquitens-class cruiser (Imperial Remnant)
104. Arquitens-class cruiser (Imperial)
105. Marauder-class corvette (missile version)
106. Broken Horn
107. Jabba's sail barge
108. AAT (CIS)
109. AAT (Trade Fed)
110. Wayfarer-class medium transport
111. Sandcrawler
112. J-type Nubian Royal Starship
113. Lancer-class frigate
114. Clone Turbo Tank
115. Zeta-class cargo shuttle
116. C-ROC Gozanti freighter
117. FarStar
118. Taylander shuttle
119. MTT (CIS)
120. MTT (Trade Fed)
121. Marauder-class corvette (turbolaser version)
122. Gozanti-class cruiser
123. Nightbrother
124. Gauntlet
125. Crucible
126. Ghtroc 720 freighter
127. IGV-55 surveillance vessel
128. Silver Angel
129. Charger c70 frigate
130. Clone impoundment vessel
131. T6 shuttle
132. Guardian-class light cruiser
133. Jade Shadow
134. Jade's Fire
135. Fortune and Glory
136. Lambda-class Imperial shuttle
137. F-143 Coruscant fireship
138. Hapes Nova-class battle cruiser
139. J-type Naboo star skiff
140. Last Resort
141. Xizor Transport Systems container transport
142. YT-1000
143. Goji-DF turtle tanker
144. Sundered Heart (Empire at War)
145. BFF-1 bulk freighter
146. TUG-134 Republic tugboat
147. Eta-class shuttle
148. AT-AT
149. AT-Hauler
150. Shekelesh-class Moogan gunship
151. Millennium Falcon
152. Hound's Tooth
153. Theta-class shuttle
154. Slave I (Jango)
155. Slave I (Boba)

I have every Star Wars vehicle encyclopedia ever published and very grand ambitions. My current plan is to start getting into larger ships, probably starting with some of the mid-sized Star Destroyer classes (I don't think my current fleet really shows my open Imperial bias as much as I'd like). Public opinion does have some influence on my priority list, though, so if there's something you'd particularly like to see, I'm open to suggestions! Although I don't make any promises as to how that'll translate to actual time. ;)

Edited by Kdapt-Preacher

Share this post


Link to post
Share on other sites

I'm one of your followers on Rebrickable and I love all of these. I'm currently working on Jorstad's Victory, but after that's done I'm going to start on either your Quasar or Arquitens.

 

As for suggestions, what about an Acclamator? I've never seen a 1:1455 scale one and you could do an Imp color scheme. Also maybe the Dreadnought heavy cruiser

Share this post


Link to post
Share on other sites
28 minutes ago, Gremer2 said:

I'm one of your followers on Rebrickable and I love all of these. I'm currently working on Jorstad's Victory, but after that's done I'm going to start on either your Quasar or Arquitens.

 

As for suggestions, what about an Acclamator? I've never seen a 1:1455 scale one and you could do an Imp color scheme. Also maybe the Dreadnought heavy cruiser

I'm actively working on a Dreadnought already! I'm doing the more angular canon version from Rebels first, but the classic EU version will be after that. It's a ways from being finished, though; the shape of it is so distinctive that I think it's important that all those angles be pretty much dead on, and I'm not satisfied with them at the moment, especially around the engine block. It needs to be ruminated on for a while yet.
An Acclamator's on the list as well. I'm not sure the Imp "the only paint we had was gray" version deserves to be called a color scheme, but when I eventually make one it'll definitely have the AotC/Imperial gray and the TCW/RotS red stripes, and probably a file for the extra stripes on Galactic Guardian as well. I know there's at least one on Rebrickable that's approximately the right size (I don't remember whether it's 1/1455 or 1/1666, to match the original UCS ISD, but that's only a difference of a couple of studs over the length of the ship), but I've never seen one that I thought was completely satisfactory. The bottom has a lot more structure than most Star Destroyers, so there are a lot of angles to get right. But yeah, it'll happen!

Edited by Kdapt-Preacher

Share this post


Link to post
Share on other sites

Brilliant work, my favourite is no.45, it is one of the smallest but it captures the shape of the ship in such a genius and recognisable way, I also really like the cargo ships and Trade Federation landing craft, though all of the ships are very nicely done

Share this post


Link to post
Share on other sites

This really puts the scale of all the different ships in perspective, a most impressive fleet! I had no idea the Trade Federation landing craft were quite *that* big.

As for other ships, the Stinger Mantis or some Mon Cala ships are the first that come to mind. Maybe Jabba's sail barge as well, or

Spoiler

Cad Bane's ship from the Bad Batch?

 

Edited by TeddytheSpoon

Share this post


Link to post
Share on other sites
4 hours ago, TeddytheSpoon said:

. Maybe Jabba's sail barge as well, or

 

that's 70.

That's all very cool. Beside the UCS ships or minifig scale ships I also like the mini or micro versions, here especially no 1, the defender class light corvette.

Are you presenting them all also built? They don't need so much space as big ones but still would need to be presented well.

Share this post


Link to post
Share on other sites
4 hours ago, Mr Ogel said:

that's 70.

That's all very cool. Beside the UCS ships or minifig scale ships I also like the mini or micro versions, here especially no 1, the defender class light corvette.

Are you presenting them all also built? They don't need so much space as big ones but still would need to be presented well.

Oh yeah, whoops... In my defence it is very small on the picture! :laugh:

+1 on the built front, it'd be awesome to see something like the battle of Scarif with a bunch of these ships about. On that note... Perhaps the Scarif shield gate to add to the collection? I realise it's not a ship strictly speaking, but still... 

Edited by TeddytheSpoon

Share this post


Link to post
Share on other sites
23 minutes ago, TeddytheSpoon said:

On that note... Perhaps the Scarif shield gate to add to the collection? I realise it's not a ship strictly speaking, but still... 

funny, had the same idea *oh2*

Share this post


Link to post
Share on other sites
11 hours ago, TeddytheSpoon said:

This really puts the scale of all the different ships in perspective, a most impressive fleet! I had no idea the Trade Federation landing craft were quite *that* big.

As for other ships, the Stinger Mantis or some Mon Cala ships are the first that come to mind. Maybe Jabba's sail barge as well, or

  Reveal hidden contents

Cad Bane's ship from the Bad Batch?

 

There's disagreement in canon as to how big the C-9979s are, actually, but that larger size is the better one. Most text sources (including the Databank, which is usually reliable) say they're only 149 meters wide (and several sources give other dimensions that conflict with themselves--the ship is perfectly clearly wider than it is long, no matter who says otherwise). But that isn't reconcilable with The Phantom Menace; that would mean the 'foot' was only about 7 meters wide, which is much smaller than what's shown in the movie, and too small for an MTT to fit through at all. I pulled the 3D model from SW:BFII, which is exactly 357.75 meters wide and 166.50 meters long, and based the dimensions of my model on that.

I loved Jedi: Fallen Order, so the only reason I haven't made a Stinger Mantis yet is that I don't know how large the ship is. It's definitely possible to work it out from screenshots of Cal standing in the doorway or similar, or to rip the 3D model out of the game and measure it, but I haven't done that work yet (I've been ripping files out of TOR instead). I'll get around to it!

7 hours ago, Mr Ogel said:

Are you presenting them all also built? They don't need so much space as big ones but still would need to be presented well.

I haven't designed scenes for any of the space vehicles, but for some of the ground vehicles I have: https://rebrickable.com/mocs/MOC-68837/Kdapt-Preacher/11455-small-vehicles-at-at-tie-fighters-mtt-sail-barge-y-wings-aat-pac-mg-100/#details

2 hours ago, TeddytheSpoon said:

+1 on the built front, it'd be awesome to see something like the battle of Scarif with a bunch of these ships about. On that note... Perhaps the Scarif shield gate to add to the collection? I realise it's not a ship strictly speaking, but still... 

Enough people have mentioned the Battle of Scarif to me that I'm inclined to take it as a sign. The next model I publish is going to be the Eta-class supply barge (it's almost finished; might even go up today), and when that's done I'll have every ship from Scarif except Profundity, so I'll probably be obligated to complete the collection there (especially since that's one of the only ones I'm missing from SW:Squadrons too). And once I have all the ships, it does seem like the Shield Gate might be in order... we'll see! I don't think they've published exactly how large it is, either but that could be worked out too from the shots of the Star Destroyer hitting it.

Share this post


Link to post
Share on other sites

These are really great. I am especially fond of the fact that the Defender light corvette made it to the fleet. I have a real soft spot for that ship.

Share this post


Link to post
Share on other sites

Very nice, reminds me of @TheNerdyOne_'s fleet but this is a very different scale. But both were comprehensive fleets of digital lego star wars star ships.

If I can be so bold as to make a suggestion, were you planning to make the 'First Light' from Solo.

Share this post


Link to post
Share on other sites
11 hours ago, Agent Kallus said:

If I can be so bold as to make a suggestion, were you planning to make the 'First Light' from Solo.

First Light would be a great model--the shape lends itself well to this scale, so I think it would look really good. I looked at it when I was making the Coronet, since they're nominally the same class, but the reason I haven't made it yet is that it's another one where nobody's published the size of the ship. It's probably possible to estimate it if you can get the height of the doorway when Han and Beckett board it, but I haven't done that work yet. My guess is that it'll be about 200 meters, similar to the Coronet, but given that the ships don't look anything alike I'm not sure enough of that to build the model off it. So yes, it's on the list! But I'll have to do the math first, or find somebody else who's done it.

Somewhere on the Internet there has to be a collection of people who obsessively work out the stats for every ship that appears on-screen and puts them on a forum, right? Surely those people exist. If anybody here knows where they hang out, I'd love a link to them!

Share this post


Link to post
Share on other sites
1 hour ago, Kdapt-Preacher said:

And the fleet shot that took all afternoon to render is already out of date after barely a day. Sigh.

oh, that's life! But the ETA class was worth it - nice greeblings on the side and a perfect rendition. Also a splendid idea to insert it into the original picture!

Other ideas: Moomo Williwaw or the Buckshot from Solo

Share this post


Link to post
Share on other sites
12 hours ago, Mr Ogel said:

Other ideas: Moomo Williwaw or the Buckshot from Solo

kCAhHrW.png

Interesting suggestion--that hadn't been on my radar at all, but I like it! I'm not sure this is the model I'm going to go with--it really needs to be a stud shorter, but I'm not sure yet how to get there without losing the shape--but it's something. I'll have to make some of the other small ships from the KotOR comics to go with it.

The Buckshot didn't actually make it into canon. Enfys Nest's ship is called Aerie now, and it doesn't have any canon images. The design that would've been the Buckshot was adapted into a very blurry assault ship in Rise of Skywalker. I'm not aware of any images where the ship is anything other than a grey smear with some engine lights, so there isn't a whole lot to go on there.

Edited by Kdapt-Preacher

Share this post


Link to post
Share on other sites

I've got a few other suggestions:

 

Imperial Arrestor Cruiser

Providence-class dreadnought (preferably the Invisible Hand/1km) length

Munificent-class frigate

Recusant cruiser

Malevolence

Share this post


Link to post
Share on other sites
2 hours ago, Gremer2 said:

I've got a few other suggestions:

 

Imperial Arrestor Cruiser

Providence-class dreadnought (preferably the Invisible Hand/1km) length

Munificent-class frigate

Recusant cruiser

Malevolence

The Arrestor Cruiser is one of the next on the list--I'm not sure if it's going to be the next medium-sized model or the one after that, but it'll be soonish (again with no promises as to how that translates to actual time). I love the skeletal look of the CIS ships, but I'm going to need to build up to something that complicated. I intend to build them, but they're not going to be the first capital ships I do. Also, Malevolence at this scale would be 3.33 meters (almost 11 feet) long, so that one may be a while longer. :laugh:

Share this post


Link to post
Share on other sites
17 minutes ago, Kdapt-Preacher said:

The Arrestor Cruiser is one of the next on the list--I'm not sure if it's going to be the next medium-sized model or the one after that, but it'll be soonish (again with no promises as to how that translates to actual time). I love the skeletal look of the CIS ships, but I'm going to need to build up to something that complicated. I intend to build them, but they're not going to be the first capital ships I do. Also, Malevolence at this scale would be 3.33 meters (almost 11 feet) long, so that one may be a while longer. :laugh:

Oh dang, I didn't realize the Malevolence was that big. I knew it was sizable, but I didn't think it was nearly 3 times the size of an ISD. 

Share this post


Link to post
Share on other sites
On 7/9/2021 at 12:58 AM, TeddytheSpoon said:

As for other ships, the Stinger Mantis or some Mon Cala ships are the first that come to mind.

I have successfully extracted the model of the Stinger Mantis from Jedi: Fallen Order. Formally and for the record, it is 49.79 meters long, 11.16 meters wide, and 56.37 meters tall with the bottom wing extended. That's larger than I expected. And it's a super convenient size, since that makes it almost exactly one stud wide. So that'll be the next model I publish. The question is, how many skins do I need.....

Share this post


Link to post
Share on other sites
13 hours ago, Kdapt-Preacher said:

 

The Buckshot didn't actually make it into canon. Enfys Nest's ship is called Aerie now, and it doesn't have any canon images. The design that would've been the Buckshot was adapted into a very blurry assault ship in Rise of Skywalker. I'm not aware of any images where the ship is anything other than a grey smear with some engine lights, so there isn't a whole lot to go on there.

pictures ofthe buckshot you can find on Twiiter by Phil Szostak:

but as you said it is more a concept ship - should have done it for the contest so...

Share this post


Link to post
Share on other sites
11 hours ago, Kdapt-Preacher said:

I have successfully extracted the model of the Stinger Mantis from Jedi: Fallen Order. Formally and for the record, it is 49.79 meters long, 11.16 meters wide, and 56.37 meters tall with the bottom wing extended. That's larger than I expected. And it's a super convenient size, since that makes it almost exactly one stud wide. So that'll be the next model I publish. The question is, how many skins do I need.....

that is a LOT larger than I expected, I have richboyjhae's AT-AT sitting on my dresser and the Mantis would be taller than two of them stacked on top of eachother, and longer than two of them back to back as well. Massive.

Share this post


Link to post
Share on other sites
8 hours ago, Mr Ogel said:

pictures ofthe buckshot you can find on Twiiter by Phil Szostak:

but as you said it is more a concept ship - should have done it for the contest so...

I have the Art of Solo book, so I've seen the concept art. But as it stands, there is no ship in Star Wars called the Buckshot at all, and the concept art isn't identical to the ship that appeared in RoS, so it isn't very helpful as a reference for that either. The book does have some great reference shots of the Cantwell-class Arrestor Cruiser, though.

qIsQx3B.png

Stinger Mantis, take 1. Possibly not the final model, but I think this is the general idea. Models under 20 parts have to be manually approved by Rebrickable admins, so it may not be public for a few days.

 

Share this post


Link to post
Share on other sites

1280x720.png

Let it never be said that I did something halfway! Some of the skins work out better than others (the ones that're mostly metallic in-game are hard, especially since the 1x1 bracket doesn't exist in dark grey), but overall I'm quite pleased with them.

Now the question--and this is very important to me--is, do I count this as one ship or sixteen? I tend to think 16, since I already have multiple the color-swapped versions of the CR90s and PLY-3000s, but it does seem a bit different when they're literally the same ship.

Edited by Kdapt-Preacher

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member