[TC20] Technic Studless Recreation Contest - Entry Topic

[Jim]

TECHNIC STUDLESS RECREATION CONTEST - ENTRY TOPIC

CONTEST INFORMATION

More information about the contest can be found in the general discussion topic.

WHAT DO I NEED TO ENTER?

Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully.

ENTRY POST

The entry post in this topic needs to contain:

• Entry name
• One or more images (max 4).  You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024.
• Include the set number and a picture (actual photo or downloaded image) of the original model.
• Embedded video is not mandatory this time
• Link to your discussion topic

IMPORTANT

This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.

[GerritvdG]

1. Red Forklift - 8835 studless

Original set: 8835

Description:

• Features: HOG steering, handle for tilting the boom and gear for raising/lowering the forks;
• Additional features: driver's seat, fake steering wheel and roof hatch;
• Dimensions model:  25(L)x11(W)x19(H) studs
• Dimensions 8835:   28(L)x12(W)x19(H) studs
• Total parts: 297 (240 in 8835)

Discussion topic

Images and video (including side by side comparison)

 

 

 

 

[filsawgood]

2. Lego 8207 Dune Duster - remake

Original set: 8207

Discussion topic: here

 

[Jurss]

3. Lego 8440 Formula Flash

Link to discussion topic

[osterum]

4. 5541 (10151) Blue Fury remaster

Original set: 5541

Functions: 

• openable trunk
• steering using the steering wheel in the cabin 
• working fake v8

Discussion topic

 

[MP LEGO Technic creations]

5. Backhoe grader

Original set: 8862

Features: HOG steering

                 Pendular front axle

                 Openable hood

                 Worm gear-operated front loader

                 Worm gear-operated outriggers

                 Pneumatic rear arm

                 Rotating rear arm

Discussion topic:

Photos:

 

 

 

Video: 

 

 

[SaperPL]

6. 8816 ATV Off Road Racer Remake

Original set: 8816

Features:

• Steering with steering wheel (as in original set)
• Rear suspension on A-model (as in original set)
• Instructions for A & B models of the set
• Mostly the same parts between A/B/C models with less overhead of spare parts than in original set
• Using mostly modern/currently available Lego Technic elements, apart from round headlight tiles

Discussion topic:

Original set photo:

My remake of the A-model:

My remake of the B-model:

Video:

Additional notes:

• I picked this because I wanted to make a whole set with instructions for all models included in the package.
• This set was (at least for me) about introduction to advanced structural build techniques with Technic beams connected perpendicularly to beams stacked with additional plates. The remake is about some current building techniques with modern studless pieces.
• The C-model does not qualify for the contest entry as it is a motorisation mod of the B-model, only A & B models are part of this entry. The C-model is still included in the discussion topic and instructions as an interesting oddity.

[Cardboy]

7. Tow Truck

Original set: 8462

Features: HOG steering

                 180 Degree Rotating Crane

                  Extending Boom Arm with Winch

                  Retractable wheel-lift with auto alignment

                  Height Adjustable wheel-lift

                

Discussion topic:

See more details here

[Seasider]

8. Tipper Truck Redux

Original set: 8848 Tipper Truck / Power Truck (1981)

Features:

HOG steering - now on top of cabin

Front bucket lift - was lever now gear operated

Rear Tipper bed tilt - was lever now gear/linear actuator operated

Front and Rear PTOs

Seats and Fake Steering Wheel - new model addition

Pictures:

 

Original 1981 model

Redux model

Comparison (Original Top, Redux Bottom)

Redux details

Video:

Discussion thread:

 

[gyenesvi]

9. 6-Wheeler Moon Buggy

Original set: 8830

Features:

• Pendular suspension linkage that averages between front and rear axles
• Inline 3 cylinder engine driven by middle wheels
• Functional steering wheel and HoG steering (front and rear wheels)

Discussion topic: 

 

Background info: I chose this set as it was my first technic set, and I wanted to pay a tribute to it. The scale is a bit larger because these were the smallest wheels that I had 6 of available for now. The larger scale made it possible to add a simple but interesting suspension mechanism and the working engine, which I think could easily be features of a modern set of this scale. On the bodywork, I mainly went for the usage of modern panels and a more curvy front section.

Original vs Remake: (true scale ratio)

Photos:

Renders:

Video:

 

[Burko-uk]

10. Pneumatic Excavator

Original set: 8837

Features: Combined HOG steering / body slewing

                  Pneumatic lifting arm

                  Pneumatic Bucket                

Discussion topic:

[TC20] 8837 Pneumatic Excavator - LEGO Technic and Model Team - Eurobricks Forums

Photos: (Original and Studless)

[RiGi]

11. Forklift Transporter

Original Set: 8872

Features:

• Truck - HoG steering, trailer coupling mechanism, openable doors
• Trailer - Retractable landing gear, ramp at rear can be lowered/raised
• Forklift - HoG steering, mast can be tilted backwards/forwards, forks can be lowered/raised

Discussion topic:

Photos:

[Touc4nx]

12. 8859 Remake : Tractor Studless

Original Set : 8859

Link to the Topic :

Functions : 

• Rear PTO with clutch gear, linked to the differential
• Working fake engine
• Working attachment lift, with ratchet locking
• Openning hood
• Working steering wheel

Other Features :

• Two different attachments 
• Akerman geometry
• Seat adapted for the technic figures.

Pictures :

 

[2GodBDGlory]

13. Whirlwind Rescue

Original set: 8856 Whirlwind Rescue (1991)

Features:

Crank-operated main and tail rotors

Joystick-operated cyclic pitch mechanism with swashplate

Winch arm deployment

Winch with ratchet

Landing gear deployment        

Pictures:

Discussion topic:

 

Video:

 

 

[BrickBuildingFox]

14. 851's big brother

Original: 851

Functions:

• Pendulum axis (front)
• Inline 6 cylinder
• 3-point hitch (working like original model)
• rotating mower
• openable hood

Topic:

Pictures:

[Shumo Lego]

15. Super Car - 8880 studless

Original set: 8880

Description:

• All the features of the original kit are preserved: steering with all wheels from the handle on the roof and from the steering wheel in the cabin, a v8 engine model with a fan, a 4-speed gearbox, all-wheel drive with three differentials, independent suspension of all wheels;
  Additional functions: Opening the engine compartment with a support, lifting the headlights with a lever from the cab;

Discussion topic

Edit: Sorry but no pics means no entry. 

[howitzer]

16. 8824 Hovercraft studless remake

Original features replicated (propeller driven by hidden front wheels and steered by rear wheels with HOG steerint) plus added a 2-cylinder fake engine. Some new aesthetic touches, like dashboard with steering wheel and red green/lights.

 

[Samolot]

17. 8462 Futuristic Tow Truck - Reincarnation

crane extension - pneumatic

boom lifting - pneumatic

rear outriggers - pneumatic

rear underlift lifting - pneumatic

working steering wheel, tilted cabin, fake engine, suspension, hog steering, crane rotation/

 

 

[TC 20] 8462 Futuristic Tow Truck - Reincarnation - LEGO Technic and Model Team - Eurobricks Forums

8462 Reincarnation - Bricksafe

[sebulba56]

18. 2020's 8880 supercar

Original set: 8880

Features: HOG steering on 4 wheels

                 4x4 transmission

                 4 speed sequential gearbox with fake engine

                Opening doors

                 Opening back hood

                 Working suspensions

                 Pop up headlights

Discussion topic:

https://www.eurobricks.com/forum/index.php?/forums/topic/186862-tc20-2020s-8880-supercar/

Pictures :

 

[Wiseman_2]

19. 8460/8431/8438-B Truck with Knuckleboom Crane - Studless

Original Set: 8460/8431/8438-B Knuckleboom Crane Truck

Functions:

• Front wheels steered via the roof light
• Individually controlled left and right side stabilizers
• Crane rotation via gear on left side
• Two stage crane, with pneumatic switches on the left side, with the pump mounted horizontally between the rear axles and activated by a lever at the back of the truck
• Mini piston engine and spinning fan driven by dual rear differentials

Discussion Topic:

 

Photos:

Some comparisons with the original model:

 

[Akassin]

20. Robot-Guardian

Original set: 6949

Description:

The model is made on a 1.7: 1 scale

Wheel-controlled functions
- body rotation
- head rotation
- raising arms
- flexion of the arms

Manual functions:
- opening of the cabin
- control of the lower and upper claws

Other functions:
- suspension

Discussion topic:

 

 

[deehtha]

21. Prop Plane

Original set: 8855

Features:  

• Joystick operated Ailerons and Elevators
• 4-cylinder engine

Discussion topic:

 

Pictures:

[MangaNOID]

22. Technic Space Megafig...and buggy

ORIGINAL SET: 886

FEATURES:

Megafig has walking legs operated from the head movement

Megafig can also fold both legs up simultaneously and full rotation of head and arms like a Minifig

Megafig has two pin holes in the back of legs for fixing on to the buggy

'airtanks' can easily detach

Buggy has all round suspension and 4 wheel steering.

Buggy's seats can 'unclip' forward to reveal two axle pins storage for fitting to where Megafig will sit.

 

Both figure and buggy accurately scaled up 4:1 retaining 'even' stud geometry

4 stickers used

3 added functions from original set

About 850 parts

43 system parts

2 - 3rd party hoses

 

 

build log:

 

[mpj]

23. Indy transport, set 6335

Original Set: 6335

Link to the Topic:

 

Original model:

Technic version:

[RazzPinazzo]

24. 8880 Supercar studless

Original set: 8880

Features:

• Identical to the original size (1 stud wider)
• Independent suspension of all wheels (8 x 6.5L hard shock absorbers)
• Steering by HOG and steering wheel, turning all wheels, Ackermann
• All-wheel drive
• 4-speed gearbox with ball-joint selector
• Identical to the original transmisson (4x4, 3 differntials, 4-speed gearbox, chain drive)
• V8 fake engine (identical to original camber)
• Rising headlights
• Opening hood (in back)

Discussion topic: