[TC19] Technic Motorbike Contest - Entry Topic

[Milan]

DON'T FORGET TO INCLUDE A PICTURE OF THE CHASSIS BEFORE THE BODYWORK HAS BEEN ADDED.
A BOTTOM CHASSIS PICTURE DOES NOT COUNT AS CHASSIS PICTURE!!

 

TECHNIC MOTORBIKE CONTEST - ENTRY TOPIC

CONTEST INFORMATION

More information about the contest can be found in the general discussion topic.

WHAT DO I NEED TO ENTER?

Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully.

ENTRY POST

The entry post in this topic needs to contain:

• Entry name
• One or more images (max 4).  You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024.
• At least one image of the chassis, so take a pic where we can see the chassis before you close the bodywork.
• Embedded video is not mandatory this time
• Link to your discussion topic

IMPORTANT

This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.

[Thirdwigg]

 

Kickboxer Diesel

Features:

• Steering
• Front and Rear Suspension
• Flat 4 Engine
• Four Speed Sequential Transmission

Main Photo

Left Side

Right Front

Chassis Photo

Video

 

[2GodBDGlory]

1987 Suzuki Nuda Concept

Functions:

-Dual Swing-arm suspension

-2WD, with shaft drive

-Hub-centered steering, with a bit of a virtual pivot

-6-speed sequential gearbox (pedal operated, no ratchet)

-Clutch (lever-operated)

-Front disc brake (lever-operated)

-Rear disc brake (pedal-operated)

-I-4 piston engine

Main image

Left side

 

Underbody shot

 

Bare Chassis

 

[BrickBuildingFox]

FOXBIKE

 

 

[Seasider]

The Speeder

Description:

Hardtail Chopper

Front suspension

Flat 2 cylinder engine

Dimensions (approx): 54 studs long, 11 wide (18 at handlebars) & 17 high

Video:

WIP Thread:

 

Edited January 29, 2021 by Seasider

[steph77]

KATANA SUPERSPORT

Main picture:

Features:

- Suspensions

- Direction

- 4 speeds gearbox, sequential with shiffter

- Breaks

- Kickstand

Pictures summary:

 

 

Frame view

 

Topic

Edited February 5, 2021 by steph77

[HorcikDesigns]

HD.one 
_____________________________
Main photo:

___________Features:_______________

- easily interchangible power pack modules:
-------- fake engine with two speed transmission and pedal shifter
-------- or mechanically much easier electric powerpack with detailed batterybox and controller, all of them fake.
- tubular wannabe trellis space frame that adds lateral stiffness (the longitudal stiffness is achieved by the power pack and central beam-spine that act as real main load bearing frame
- and steering with realistic geometry (caster angle, front trail, steering angle)
- working suspension (springs only, no dampers)
- almost modular design - frame, body parts, powerpacks
- loads of attachment point for additional body parts or accessories
- detailed front brakes
- fake rear brake pedal




______________

chassis view:

WIP and entry thread:

 

Edited January 30, 2021 by HorcikDesigns

[MajklSpajkl]

THE RED BLAZE

Features:

 - soft tail

 - front suspension

 - V-Twin fake engine

 - two speed manual/pedal gearbox (L-N-H)

Chassis / Internals photo:

Video:

Discussion topic:

 

Edited January 29, 2021 by MajklSpajkl

[nikolyakov]

Moc Name: Hybrid (2WD)

- Front suspension

- Rear suspension

- Fake flat 4 engine

- 2 speed gearbox with; low 2wd and fast rear drive mode

Discussion topic, 

Good luck and thanks to all contestants. 

 

IMG_20210123_161833 by nikolyakov, on Flickr

IMG_20210123_161738 by nikolyakov, on Flickr

IMG_20210123_162408 by nikolyakov, on Flickr

IMG_20210123_161902 by nikolyakov, on Flickr

 

Edited February 3, 2021 by nikolyakov
Discussion topic edit

[Jundis]

F.B Mondial HPS 125

Build after the real 125cc motorcycle: HPS 125 

Main:

Features:

- Full front and back suspension

- 1 Cylinder fake engine

- 4 Speed sequential gearbox via left pedal

- Retractable side stand

- easily removable upper frame and exhaust

Right Side:

Left side:

Chassis:

Discussion Topic:

 

[MP LEGO Technic creations]

The Predator

Features: 

• Front and rear independent suspension
• Steering
• 2 speed, pedal-operated gearbox with neutral
• Fake V6 engine

Photos: 

 

 

And the internals:

Good luck to everyone in this contest!

Edited February 2, 2021 by MP LEGO Technic creations

[ralphie]

Route Clearance Vehicle

The zombie outbreak was under control, but the undead still showed up in surprising numbers along supply routes. Something about the sound of diesel engines rattled what was left of their brains. Helicopters couldn’t clear underpasses, or along heavily wooded roads, but an RCV in experienced hands could clear 400 miles a day of just about anything.

Features

• Suspension & steering
• Turbine engine with alternating fixed and spinning fan layers
• Planetary reduction
• Dual miniguns driven by the engine
• Miniguns engage by lowering them, using rotary clutch selector

 

Side View (guns stowed)

Front View (guns deployed)

Rear View (guns deployed)

Rear View / Frame

Build Topic

https://www.eurobricks.com/forum/index.php?/forums/topic/182783-tc19-route-clearance-vehicle/

 

[Targi]

Tulitsa

An as-small-as-it-gets model heavily inspired by an 80s Soviet scooter.

Features

• Steering
• Suspension: coil spring rear, rubber connector torsion front
• Chain-driven single-cylinder engine

Photos:

[All stunts performed by professionals. Do not attempt to drive your Tulitsa in snow.]

Due to scale, the bodywork is actually part of the chassis. Hence, on the chassis photo, all of the removable body panels are removed, the rest is half-disassembled:

 Discussion topic

 

 

[JRS86]

Hi! I'm Jon, and I'm new around here. I'd like to toss my hat in the ring; here's my entry, the Fat Chop 1200! <<< click here for my entry topic!!!

Here's a list of features that I chose to build towards:

• Roughly half the size of 42036 B-model
• Hardtail rear
• Front suspension
• Cafe-style headlight, spearhead taillight
• Jockey shifter
• Low, wide handlebars with brakes
• Chain-driven 90° V-engine
• Wide rear tyre
• Straight-pipe exhaust
• Black and red "blood eagle" theme
• Minor details: gauges, air intake, radiator
• Minimal off-color pins and axles
• No illegal connections
• Must be sturdy and dense

 

Here are a few more shots of my entry. Thanks for looking 😊

 

__JRS⁸⁶__

 

Edited February 1, 2021 by JRS86

[johnnym]

2055 GENESIS Renegade

Functionality:

• Steering
• Front suspension and hard tail
• Turboshaft engine (Buford system), impeller on turbo shaft driven by the rear wheel via shaft drive utilizing overdrive (20z => 12z(, 16z => 16z), 36z => 12z)
• Openable engine hoods
• Free standing

Pictures:

Discussion thread:

 

[Jurss]

JF explorer 2WD

Features:

• Steering
• 2 wheel drive
• Full suspension
• 2 speed gearbox
• Differential between front and rear wheel
• 2 cylinder flat fake engine

 

[MinusAndy]

Kaneda's Other Bike

Features:

 Balanced Suspension with Single Sided Swing Arms.

Hub Centre Steering with Speeder Bike Style Arms.

Working Rear Brake Pedal.

Two Speed + Neutral Gearbox with Pedal Shifter.

Spring Loaded Kickstand.

Six Cylinder Radial Fake Engine.

 

 

Link to video

https://flic.kr/p/2kxQuUc

 

Edited February 1, 2021 by MinusAndy

[MangaNOID]

Nurses speed

 

Used for high density environment medical emergencies this Retro styled scooter has...

-(fake) electric motor

-carry racks and basket

-adjustable and opening seat

-‘sprung’ kickstand

-chain tensioner

-balloon tyres for tough terrain 

-suspension and steering

 

 

 

 

 

[Ivorrr]

Custom Fat Boi

Features:

- Front suspension

- V6 Fake engine

- 2 speed gearbox with neutral

I wish I had Tumbler tires...

 

Edited February 7, 2021 by Ivorrr
Replaced the picture of the bottom for 4x image of chassis without bodywork as per guidelines

[Rudivdk]

SNAKE custom chopper

Inspired by Ninjago's numerous snake designs and wacky vehicles.

 

Features:

• steering front fork
• full suspension (front and rear)
• chain driven rear wheel
• 4-speed gearbox
  • with 4<->1 block
• sequential stepper shift pedal
• fake V6 engine
• retractable stand
• 'snake mode':
  • rear adjustable ride height, linked to
    • adjustable tail
    • foldable 'neck flaps' (cobra 'hood')

 

Video:

 

More pictures:

 

Discussion and build progress topic:

 

Once again this was a fun contest, good luck to all!

[johncarpenter]

Electric Scooter

Features:

• Steering
• Front and rear suspension
• Electric motor
• Removable battery pack under the seat

Video:

 

[LegoMathijs]

Rieju MRT PRO (2020)

Features:

- Rear suspension

- Steering

- Retractable side stand

Frame:

11_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

12_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

Final result:

01_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

02_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

06_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

03_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

Discussion topic:

https://www.eurobricks.com/forum/index.php?/forums/topic/183212-tc19-rieju-mrt-pro-2020/

 

 

[Coola1]

Silverback Rider

Features:

- Steering

- Front and rear suspension

- Fake V2 engine 

- Adjustable seat

Pics:

 

 

 

 

 

 

Discussion topic:

 

[brolansys BLS 21]

[TC19] Recreation of promotional Shell 2544 Motorcycle

Features

• Front suspension (through rubber bands and a yellow foam ball . . . )

• Rear suspension (through rubber bands)

• Steering

• 2 piston fake engine

• Adjustable rear swing arm via worm gear (through a Roborider chassis piece)

• Adjustable front fork via worm gear (normal worm gear box

• Glow in the dark rear light via Onyx Roborider glow in the dark wheel

 

 

 

[Zerobricks]

[TC19] Extended motorcycle with a CVT

Functions:

• Linear front suspension
• Extended swingar rear suspensions upported by small turntables
• Constant Variable Transmission
• A working V6 engine
• Steering

Features:

• Extended rear swingarm
• Detailed and complete bodywork
• Aerodynamic details such as winglets, flat bottom and rear diffuser
• Additional details such as brake discs in front and rear, dual exhaust pipes, large radiator, front fender, etc...

Photo of the front view:

Photo of the back view:

Photo of V6 engine and details:

Photo of the chassis when the model was still being built:

Video of the model in action with commentary:

Link to the topic: