Milan

[TC19] Technic Motorbike Contest - Entry Topic

Recommended Posts

DON'T FORGET TO INCLUDE A PICTURE OF THE CHASSIS BEFORE THE BODYWORK HAS BEEN ADDED.
A BOTTOM CHASSIS PICTURE DOES NOT COUNT AS CHASSIS PICTURE!!

 

TECHNIC MOTORBIKE CONTEST - ENTRY TOPIC

CONTEST INFORMATION

More information about the contest can be found in the general discussion topic.

WHAT DO I NEED TO ENTER?

Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully.

ENTRY POST

The entry post in this topic needs to contain:

  • Entry name
  • One or more images (max 4).  You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024.
  • At least one image of the chassis, so take a pic where we can see the chassis before you close the bodywork.
  • Embedded video is not mandatory this time
  • Link to your discussion topic

IMPORTANT

This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.

Share this post


Link to post
Share on other sites

 

Kickboxer Diesel

Features:

  • Steering
  • Front and Rear Suspension
  • Flat 4 Engine
  • Four Speed Sequential Transmission

Main Photo

50863036217_2fba63bf29_b.jpg

Left Side

50862932031_ee713d17d7_b.jpg

Right Front

50862218683_3526464169_b.jpg

Chassis Photo

50878026273_25af3dc0cd_b.jpg

Video

 

Share this post


Link to post
Share on other sites

1987 Suzuki Nuda Concept

Functions:

-Dual Swing-arm suspension

-2WD, with shaft drive

-Hub-centered steering, with a bit of a virtual pivot

-6-speed sequential gearbox (pedal operated, no ratchet)

-Clutch (lever-operated)

-Front disc brake (lever-operated)

-Rear disc brake (pedal-operated)

-I-4 piston engine

IMG_20210105_170055808.jpg

Main image

IMG_20210105_170113465.jpg

Left side

 

IMG_20210105_170143087.jpg

Underbody shot

 

IMG_20210105_185936191.jpg

Bare Chassis

 

Share this post


Link to post
Share on other sites

The Speeder

Description:

Hardtail Chopper

Front suspension

Flat 2 cylinder engine

Dimensions (approx): 54 studs long, 11 wide (18 at handlebars) & 17 high

50887452327_e8b3870c0a_b.jpg50887339761_9254b6cc94_b.jpg50886619823_62edc492e6_b.jpg50887356791_d92f77b2e7_b.jpg

Video:


WIP Thread:

 

Edited by Seasider

Share this post


Link to post
Share on other sites

KATANA SUPERSPORT

Main picture:

ZhNdcA.jpg

Features:

- Suspensions

- Direction

- 4 speeds gearbox, sequential with shiffter

- Breaks

- Kickstand

Pictures summary:

 

 

b43FQd.jpg

QDtrIc.jpg

Frame view

eyoTO5.jpg

 

Topic

Edited by steph77

Share this post


Link to post
Share on other sites

HD.one 
_____________________________

Main photo:

800x450.jpg

___________Features:_______________

- easily interchangible power pack modules:
-------- fake engine with two speed transmission and pedal shifter
-------- or mechanically much easier electric powerpack with detailed batterybox and controller, all of them fake.
- tubular wannabe trellis space frame that adds lateral stiffness (the longitudal stiffness is achieved by the power pack and central beam-spine that act as real main load bearing frame
- and steering with realistic geometry (caster angle, front trail, steering angle)
- working suspension (springs only, no dampers)
- almost modular design - frame, body parts, powerpacks
- loads of attachment point for additional body parts or accessories
- detailed front brakes
- fake rear brake pedal

800x450.jpg
800x450.jpg

______________

chassis view:

800x468.jpg


WIP and entry thread:

 

Edited by HorcikDesigns

Share this post


Link to post
Share on other sites

THE RED BLAZE

TC19_The_Red_Blaze_1.jpg

TC19_The_Red_Blaze_2.jpg

TC19_The_Red_Blaze_3.jpg

Features:

 - soft tail

 - front suspension

 - V-Twin fake engine

 - two speed manual/pedal gearbox (L-N-H)

Chassis / Internals photo:

TC19_The_Red_Blaze_4%20.jpg

Video:

Discussion topic:

 

Edited by MajklSpajkl

Share this post


Link to post
Share on other sites

Moc Name: Hybrid (2WD)

- Front suspension

- Rear suspension

- Fake flat 4 engine

- 2 speed gearbox with; low 2wd and fast rear drive mode

Discussion topic, 

Good luck and thanks to all contestants. 

 

50866603086_3c46eaa07d_b.jpgIMG_20210123_161833 by nikolyakov, on Flickr

50866601841_dcf694f300_b.jpgIMG_20210123_161738 by nikolyakov, on Flickr

50866705012_f95e041a1d_b.jpgIMG_20210123_162408 by nikolyakov, on Flickr

50865888338_3ff3b24174_b.jpgIMG_20210123_161902 by nikolyakov, on Flickr

 

Edited by nikolyakov
Discussion topic edit

Share this post


Link to post
Share on other sites

F.B Mondial HPS 125

Build after the real 125cc motorcycle: HPS 125 

Main:

1-Main.jpg

Features:

- Full front and back suspension

- 1 Cylinder fake engine

- 4 Speed sequential gearbox via left pedal

- Retractable side stand

- easily removable upper frame and exhaust

Right Side:

2-Schr-g.jpg

Left side:

3-Schr-g.jpg

Chassis:

4-Nackt.jpg

Discussion Topic:

 

Share this post


Link to post
Share on other sites

The Predator

Features: 

  • Front and rear independent suspension
  • Steering
  • 2 speed, pedal-operated gearbox with neutral
  • Fake V6 engine

Photos: 

IMG_20210130_143948

 

IMG_20210130_144136

 

IMG_20210130_144259

And the internals:

Chassis_photo

Good luck to everyone in this contest!

Edited by MP LEGO Technic creations

Share this post


Link to post
Share on other sites

Route Clearance Vehicle

The zombie outbreak was under control, but the undead still showed up in surprising numbers along supply routes. Something about the sound of diesel engines rattled what was left of their brains. Helicopters couldn’t clear underpasses, or along heavily wooded roads, but an RCV in experienced hands could clear 400 miles a day of just about anything.

Features

  • Suspension & steering
  • Turbine engine with alternating fixed and spinning fan layers
  • Planetary reduction
  • Dual miniguns driven by the engine
  • Miniguns engage by lowering them, using rotary clutch selector

 

Side View (guns stowed)

2uwmROi.jpg

Front View (guns deployed)

gHz6tNJ.jpg

Rear View (guns deployed)

N7ePqlF.jpg

Rear View / Frame

LAjqU3U.jpg

Build Topic

https://www.eurobricks.com/forum/index.php?/forums/topic/182783-tc19-route-clearance-vehicle/

 

Share this post


Link to post
Share on other sites

Tulitsa

An as-small-as-it-gets model heavily inspired by an 80s Soviet scooter.

Features

  • Steering
  • Suspension: coil spring rear, rubber connector torsion front
  • Chain-driven single-cylinder engine

Photos:

tulitsa1.jpg

tulitsa2.jpg

tulitsa3.jpg

[All stunts performed by professionals. Do not attempt to drive your Tulitsa in snow.]

Due to scale, the bodywork is actually part of the chassis. Hence, on the chassis photo, all of the removable body panels are removed, the rest is half-disassembled:

tulitsa-chassis.png

 Discussion topic

 

 

Share this post


Link to post
Share on other sites

Hi! I'm Jon, and I'm new around here. I'd like to toss my hat in the ring; here's my entry, the Fat Chop 1200! <<< click here for my entry topic!!!

HZ3eXy3.jpg

Here's a list of features that I chose to build towards:

  • Roughly half the size of 42036 B-model
  • Hardtail rear
  • Front suspension
  • Cafe-style headlight, spearhead taillight
  • Jockey shifter
  • Low, wide handlebars with brakes
  • Chain-driven 90° V-engine
  • Wide rear tyre
  • Straight-pipe exhaust
  • Black and red "blood eagle" theme
  • Minor details: gauges, air intake, radiator
  • Minimal off-color pins and axles
  • No illegal connections
  • Must be sturdy and dense
 
Here are a few more shots of my entry. Thanks for looking 😊
 
__JRS⁸⁶__
 
R9OiM20.jpg
a49T1od.jpg
mRzS2Bb.jpg
Edited by JRS86

Share this post


Link to post
Share on other sites

2055 GENESIS Renegade

Functionality:

  • Steering
  • Front suspension and hard tail
  • Turboshaft engine (Buford system), impeller on turbo shaft driven by the rear wheel via shaft drive utilizing overdrive (20z => 12z(, 16z => 16z), 36z => 12z)
  • Openable engine hoods
  • Free standing

Pictures:

genesis-renegade-brochure-01.png

genesis-renegade-brochure-02.png

genesis-renegade-brochure-03.png

genesis-renegade-brochure-04.png

Discussion thread:

 

Share this post


Link to post
Share on other sites

JF explorer 2WD

Features:

  • Steering
  • 2 wheel drive
  • Full suspension
  • 2 speed gearbox
  • Differential between front and rear wheel
  • 2 cylinder flat fake engine

800x557.jpg

800x607.jpg

800x968.jpg

800x530.jpg

 

Share this post


Link to post
Share on other sites

Kaneda's Other Bike

Features:

 Balanced Suspension with Single Sided Swing Arms.

Hub Centre Steering with Speeder Bike Style Arms.

Working Rear Brake Pedal.

Two Speed + Neutral Gearbox with Pedal Shifter.

Spring Loaded Kickstand.

Six Cylinder Radial Fake Engine.

 

50899231481_f32077ae2a_b.jpg

 

50899344687_e10516ebbf_b.jpg50898515883_fd89479e37_b.jpgTC19 finished bike.

Link to video

https://flic.kr/p/2kxQuUc

 

Edited by MinusAndy

Share this post


Link to post
Share on other sites

Nurses speed

 

Used for high density environment medical emergencies this Retro styled scooter has...

-(fake) electric motor

-carry racks and basket

-adjustable and opening seat

-‘sprung’ kickstand

-chain tensioner

-balloon tyres for tough terrain 

-suspension and steering

66896b1a-b376-4da1-bfd5-22763e19a954.jpe

 

1b5ac946-a353-4baa-917b-06f61cef4b2c.jpe

ddf37e5e-1d82-49f4-a0eb-f614b53e4f2f.jpe
 

e0d96e27-2aa5-4f6e-9394-f6281e703336.jpe
 

 

 

Share this post


Link to post
Share on other sites

Custom Fat Boi

Features:

- Front suspension

- V6 Fake engine

- 2 speed gearbox with neutral

I wish I had Tumbler tires...

1280x604.jpg

1280x604.jpg

1280x604.jpg

1280x605.jpg

 

Edited by Ivorrr
Replaced the picture of the bottom for 4x image of chassis without bodywork as per guidelines

Share this post


Link to post
Share on other sites

SNAKE custom chopper

800x600.jpg

Inspired by Ninjago's numerous snake designs and wacky vehicles.

 

Features:

  • steering front fork
  • full suspension (front and rear)
  • chain driven rear wheel
  • 4-speed gearbox
    • with 4<->1 block
  • sequential stepper shift pedal
  • fake V6 engine
  • retractable stand
  • 'snake mode':
    • rear adjustable ride height, linked to
      • adjustable tail
      • foldable 'neck flaps' (cobra 'hood')

 

Video:

 

More pictures:

800x600.jpg

800x478.jpg

800x495.jpg

 

Discussion and build progress topic:

 

Once again this was a fun contest, good luck to all!

Share this post


Link to post
Share on other sites

Electric Scooter

Features:

  • Steering
  • Front and rear suspension
  • Electric motor
  • Removable battery pack under the seat

qNn2kLnVvDD1hKo0x1gz2sZ8RjeDkJDOoRIttsyu

9_3onkEY8j0j0jbi0L_XZO0RAkTCwU2WPcdz07eV

EA59_PQMpVljyI43Xu7znrjhTq6NSjTKEFHfRuGt

ndMrNp1wu7T4HnkBgFFExaaTvDt6-VQ1z4nLdhCC

Video:

 

Share this post


Link to post
Share on other sites

Rieju MRT PRO (2020)

Features:

- Rear suspension

- Steering

- Retractable side stand

Frame:

50919511728_5976e68e46_z.jpg11_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

50919511713_289bbc6eba_z.jpg12_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

Final result:

50920335992_75ee7d9749_z.jpg01_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

50919511948_36f793148b_z.jpg02_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

50919511833_b75905c0e6_z.jpg06_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

50919511898_861cc14793_z.jpg03_Rieju_MRT_Pro_2020 by Mathijs Bongers, on Flickr

Discussion topic:

https://www.eurobricks.com/forum/index.php?/forums/topic/183212-tc19-rieju-mrt-pro-2020/

 

 

Share this post


Link to post
Share on other sites

Silverback Rider

Features:

- Steering

- Front and rear suspension

- Fake V2 engine 

- Adjustable seat

Pics:

 

image2.jpg

 

 

image0.jpg

 

image.jpg

 

image1.jpg

 

Discussion topic:

 

Share this post


Link to post
Share on other sites

[TC19] Recreation of promotional Shell 2544 Motorcycle

Features

  • Front suspension (through rubber bands and a yellow foam ball . . . )

  • Rear suspension (through rubber bands)

  • Steering

  • 2 piston fake engine

  • Adjustable rear swing arm via worm gear (through a Roborider chassis piece)

  • Adjustable front fork via worm gear (normal worm gear box

  • Glow in the dark rear light via Onyx Roborider glow in the dark wheel

 

800x600.jpg

800x600.jpg

800x800.jpg

800x600.jpg

 

 

Share this post


Link to post
Share on other sites

[TC19] Extended motorcycle with a CVT

Functions:

  • Linear front suspension
  • Extended swingar rear suspensions upported by small turntables
  • Constant Variable Transmission
  • A working V6 engine
  • Steering

Features:

  • Extended rear swingarm
  • Detailed and complete bodywork
  • Aerodynamic details such as winglets, flat bottom and rear diffuser
  • Additional details such as brake discs in front and rear, dual exhaust pipes, large radiator, front fender, etc...

Photo of the front view:

800x450.jpg

Photo of the back view:

800x600.jpg

Photo of V6 engine and details:

800x450.jpg

Photo of the chassis when the model was still being built:

800x369.jpg

Video of the model in action with commentary:

Link to the topic:

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.